计入套圈变形和润滑影响的球轴承动刚度研究

中国机械工程 ›› 2015, Vol. 26 ›› Issue (11): 1421-1428.

计入套圈变形和润滑影响的球轴承动刚度研究

熊万里1;赵紫生1;周阳1;吕浪1;侯志泉2

1.湖南大学国家高效磨削工程技术研究中心,长沙,410082
2.株洲联诚集团有限责任公司湖南省轨道装备冷却工程中心,株洲,412001

出版日期:2015-06-10 发布日期:2015-06-05
基金资助:
国家科技重大专项(2013ZX04012-052)

Research on Dynamic Stiffness of Ball Bearings Considering Ferrule Deformation and Elastohydrodynamic Lubrication

Xiong Wanli;Zhao Zisheng;Zhou Yang;Lü Lang;Hou Zhiquan

1.National Engineering Research Center for High Efficiency Grinding,Hunan University,Changsha,410082
2.Zhuzhou Lince Group Co. Ltd., Hunan Rail Transportation Cooling Engineering Center,Zhuzhou,Hunan,412001

Online:2015-06-10 Published:2015-06-05
Supported by:
National Science and Technology Major Project ( No. 2013ZX04012-052)

摘要/Abstract

摘要：

针对传统拟静力学分析方法未考虑轴承套圈热变形、离心力变形和弹流润滑作用引起轴承内部沟道曲率中心与滚动体中心几何位置关系的变化，难以准确反映轴承动刚度不足的现状，建立了计入套圈变形和弹流润滑影响的轴承拟静力学修正模型。采用所建立的模型研究了轴承不同工作转速和预紧力条件下轴承热变形、离心力变形和润滑油膜对动刚度的影响规律，通过与Gupta等典型算例及实验的对比验证，证实了所建立模型及分析结果的有效性。

关键词: 角接触球轴承, 动刚度, 套圈变形, 弹流润滑

Abstract:

Aiming at the shortage of traditional quasi-static analytical method which did not consider the changes in geometrical positions of bearing inner raceway curvature center and the rolling body center caused by bearing thermal deformation,the centrifugal force deformation and the elastohydrodynamic lubrication effect,a bearing quasi-static modified model was established considering the effects of ferrule deformation and elastohydrodynamic lubrication.The effects of thermal deformation, the centrifugal force deformation and the lubricating oil film on bearing dynamic stiffness were studied by established model under conditions of different rotational speeds and bearing preloads.The validity of the established model was verified by comparison with the Gupta typical examples and experiments.

Key words: angular contact ball bearing, dynamic stiffness, ferrule deformation, elastohydrodynamic lubrication

中图分类号:

TH133.33

熊万里, 赵紫生, 周阳, 吕浪, 侯志泉. 计入套圈变形和润滑影响的球轴承动刚度研究[J]. 中国机械工程, 2015, 26(11): 1421-1428.

Xiong Wanli, Zhao Zisheng, Zhou Yang, Lü Lang, Hou Zhiquan. Research on Dynamic Stiffness of Ball Bearings Considering Ferrule Deformation and Elastohydrodynamic Lubrication[J]. China Mechanical Engineering, 2015, 26(11): 1421-1428.

参考文献

[1]Harris T A. An Analytical Method to Predict Skid- ding in High Speed Roller Bearing[J]. Wear, 1966, 93:17-21.
[2]罗祝三,孙心德.滚动轴承在任意方向的支承刚度[J].南京航空学院学报,1992,24(3):248-256.
[3]Ali N J, Garcfa J M. Experimental Studies on the Dynamic Characteristic of Rolling Element Bearings [J]. Journal of Engineering Tribology, 2010, 224 (9):659-666.
[4]Cao Hongrui, Holkup T,Ahintas Y. A Comparative Study on the Dynamics of High Speed Spindles with Respect to Different Preload Mechanisms[J]. Inter- national Journal of Advanced Manufacturing Tech- nology, 2011,57 :871-883.
[5]张峻晖,黄红武,熊万里.高速电主轴轴承配合过盈量的计算方法研究[J].机械与电子,2004(7):7-10. 2
[6]Lin Chiwei, Tu J F, Joe K. An Integrated Thermo- mechanical-dynamic Model to Characterize Motor- ized Machine Tool Spindles during Very High Speed Rotation[J]. International Journal of Machine Tool & Manufacture, 2003,43 : 1035-1050.
[7]黄载生,周士森编.弹性力学与应用[M].杭州:浙江大学出版社,1989:331.
[8]蒋兴奇,马家驹,赵联春.高速精密角接触球轴承零件热位移分析[J].轴承,2001(1):5-7.
[9]Hamrock B J,Dowson D. Isothermal Elasto-hydro- dynamic Lubrication of Point Contacts,Part Ⅲ :Full Flooded Results[J]. Journal of Lubrication Technol- ogy, Trans. ASEM, 1976,98(2) : 223-229.
[10]李松生,陈晓阳,张钢,等.超高速时电主轴轴承的动态支承刚度分析[J].机械工程学报, 2006, 42(11): 60-65.
[11]何晓亮,熊万里,黄红武.高速精密主轴轴承热特性的计算及分析[J].机械,2003,30(6):14-16. 2
[12]Gupta P K. Transient Ball Motion and Skid in Ball Bearing[J]. Journal of Lubrication Technology, 1975,97 (2):261-269.
[13]朱益利,金超武,许磊[,等.滚珠轴承力学模型的数值求解方法研究[J].中国机械工程,2013,24(4):427-431.
[14]万长森.滚动轴承的分析方法[M].北京:机械工业出版,1987.
[15]Mohammed A A, Abdallah A E. Effects of Axial Preloading of Angular Contact Ball Bearing on the Dynamic of a Grinding Machine Spindle System[J]. Journal of Materials Processing Technology, 2003,136:48-59.