数控机床旋转轴误差的快速测量与辨识新方法

摘要/Abstract

摘要：

根据齐次变换理论推导出旋转轴基本几何误差辨识模型,在此基础上,提出了一种基于球杆仪的旋转轴基本几何误差快速测量和辨识新方法,将球杆仪一端的中心座分别安装在旋转工作台的3个不同位置,通过联动控制球杆仪另一端球心按圆形轨迹运动,分别测量旋转轴圆周每个离散位置点在X、Y、Z方向上的偏差,并根据所建立的辨识模型,辨识出旋转轴的6项基本几何误差。同时,提出了基于系数矩阵灵敏度分析的方法,用于指导测量点的合理分布,减少测量误差的影响,从而提高误差辨识精度。

关键词: 几何误差, 球杆仪, 灵敏度分析, 旋转轴

Abstract:

An identification model of rotation axis basic geometric errors was derived based on the theory of homogeneous transformation, and then a new fast measurement method and identification of rotation axis basic geometric errors based on ball-bar were proposed herein. The measurement of ball-bar was adopted by one end of the ball-bar was fixed on the rotary table in three different positions respectively. By the linkage control the other end of the ball-bar in circular trajectory, the deviations of each position measurement point in the directions of X, Y and Z could be measured in each discrete position. And then the rotation axis six basic geometric errors could be identified according to the established identification model. As to guide the distribution of the measuring points and reduce the influence of measurement error, a method based on sensitivity analysis of the coefficient matrix was presented and the accuracy of error identification is improved.

Key words: geometric error, ball-bar, sensitivity analysis, rotary axis

中图分类号:

TH161.2

林述温, 吴城汀, 林清锋. 数控机床旋转轴误差的快速测量与辨识新方法[J]. 中国机械工程, 2014, 25(9): 1169-1174.

Lin Shuwen, Wu Chengting, Lin Qingfeng. Research on New Fast Measurement Method and Identification of Rotation Axis Movement Errors for CNC Machine[J]. China Mechanical Engineering, 2014, 25(9): 1169-1174.

参考文献

[1]Andolfatto L,Lavernhe S,Mayer J R R.Evaluation of Servo,Geometric and Dynamic Error Sources on Five-axis High-speed Machine Tool[J].International Journal of Machine Tools & Manufacture,2011,51(10/11):787-796.
[2]王金栋，郭俊杰，费致根，等.基于激光跟踪仪的数控机床几何误差辨识方法[J].机械工程学报,2011,47 (14)：13-19.
Wang Jindong,Guo Junjie,Fei Zhigen,et al.Method of Geometric Error Identification for Numerical Control Machine Tool Based on Laser[J]. Journal of Mechanical Engineering,2011,47(14):13-19.
[3]Tsutsumi M,Saito A.Identification and Compensation of Systematic Deviations Particular to 5-axis Machining Centers[J]. International Journal of Machine Tools and Manufacture,2003,43(8):771-780.
[4]Lei W T,Hsu Y Y.Accuracy Test of Five-axis CNC Machine Tool with 3D Probe-ball.Part I:Design and Modeling[J]. International Journal of Machine Tools and Manufacture, 2002, 42(10):1153-1162.
[5]Bringmann B,Knapp W.Model-based ‘Chase-the-Ball７’ Calibration of a 5-Axes Machining Center[J].CIRP Annals Manufacturing Technology,2006,55(1):531-534.
[6]张大卫,商鹏,田延岭,等.五轴数控机床转动轴误差元素的球杆仪检测方法[J].中国机械工程,2008,19(22):2737-2741.
Zhang Dawei, Shang Peng, Tian Yanling, et al. A DBB-based Alignment Error Measurement Method for Rotary Axis of 5-axis CNC Machine Tool[J].China Mechanical Engineering,2008,19(22):2737-2741.
[7]付璇,田怀文,朱绍维.五轴数控机床旋转轴几何误差测量与建模[J].机械设计与制造,2011(2):157-159.
Fu Xuan,Tian Huaiwen,Zhu Shaowei.Geometric Error Measurement and Modeling for Five-axis CNC Machine Tool with Rotary Axes[J].Machinery Design & Manufacture,2011(2):157-159.
[8]Zhu Shaowei,Ding Guofu,Sheng FengQin,et al.Integrated Geometric Error Modeling,Identification and Compensation of CNC Machine Tools[J].International Journal of Machine Tools & Manufacture,2012,52(1):24-29.
[9]李庆扬,王能超,易大义. 数值分析[M]. 5版.北京:清华大学出版社，2008．
[10]Hsu Y Y,Wang S S.A New Compensation Method for Geometry Errors of Five-axis Machine Tools[J].International Journal of Machine Tools & Manufacture,2007,47(2):352-360.

[1]	郑华林1;项锡平1;胡腾1;米良2;刘雁3. 五轴加工中心旋转轴几何误差元素区别建模辨识技术[J]. 中国机械工程, 2021, 32(05): 547-555.
[2]	付国强, 饶勇建, 谢云鹏, 高宏力, 邓小雷. [误差建模及精度保证方法]几何误差贡献值影响下五轴数控机床运动轴误差灵敏度分析方法[J]. 中国机械工程, 2020, 31(13): 1518-1528.
[3]	胡腾, 郭曦鹏, 米良, 殷国富. [误差建模及精度保证方法]卧式加工中心关键几何误差元素甄别方法[J]. 中国机械工程, 2020, 31(13): 1539-1547.
[4]	阮大文, 茅健, 刘钢, 马丽. [误差建模及精度保证方法]双五轴数控铣削机床旋转轴误差辨识方法[J]. 中国机械工程, 2020, 31(13): 1548-1554.
[5]	陈龙;朱颖;徐力;张高朋. 基于权重灵敏度分析的结构形状等几何优化方法[J]. 中国机械工程, 2020, 31(11): 1306-1314.
[6]	吕凤鹏;李朝阳;黄健;陈兵奎. RV减速器转臂轴承的优化设计[J]. 中国机械工程, 2020, 31(09): 1043-1048.
[7]	唐皓;唐果宁. 六轴运动平台几何误差与阵列光纤对准精度的映射关系[J]. 中国机械工程, 2019, 30(14): 1720-1726.
[8]	许焕卫；李沐峰；王鑫；胡聪；张遂川. 基于灵敏度分析的区间不确定性稳健设计[J]. 中国机械工程, 2019, 30(13): 1545-1551.
[9]	周兵;陈逸彬;耿元;任程远. 互联悬架液压参数灵敏度分析及优化[J]. 中国机械工程, 2017, 28(19): 2269-2274.
[10]	李杨1,2,3;吴运新1,2,3;龚海1,2,3;刘磊1,2,3. 中子谱仪样品台几何误差建模和灵敏度分析[J]. 中国机械工程, 2017, 28(19): 2305-2310.
[11]	秦训鹏1,2;冯佳伟1,2;王永亮1,2;金磊1,2. 基于响应面方法的微型车车门模态分析与优化[J]. 中国机械工程, 2017, 28(14): 1690-1695.
[12]	李玉昆, 李永泉, 佘亚中, 张立杰, . 3-UPS/S并联稳定平台满载工况误差分析与运动学标定[J]. 中国机械工程, 2017, 28(08): 958-965.
[13]	李宇鹏, 孙洪胜, 许亚钢. 基于TOPSIS法的大型床身优选设计[J]. 中国机械工程, 2017, 28(03): 279-285,293.
[14]	陈光胜, 郑庆振. 一种多轴数控机床末端静刚度快速辨识方法[J]. 中国机械工程, 2017, 28(03): 322-326.
[15]	王长科, 阳光武, 朱涛, 于金朋. 车体设计参数对车体垂向弯曲振动频率的灵敏度分析[J]. 中国机械工程, 2016, 27(16): 2267-2271.