基于多零件工序族工艺规划的机床产品构型综合设计

中国机械工程 ›› 2014, Vol. 25 ›› Issue (5): 608-613.

基于多零件工序族工艺规划的机床产品构型综合设计

黄华1;靳岚1;芮执元1;苟卫东2

1.兰州理工大学，兰州，730050
2.青海一机数控机床有限责任公司，西宁，810018

出版日期:2014-03-10 发布日期:2014-03-21
基金资助:
国家科技重大专项(2010ZX04001-032)；甘肃省自然科学基金资助项目(1308RJYA086)

Structure Configuration Synthesis of Machine Tools Based on Process Planning of Multi-parts

Huang Hua1;Jin Lan1;Rui Zhiyuan1;Gou Weidong2

1.Lanzhou University of Science and Technology,Lanzhou,730050
2.Qinghai No.1 Machine Tool Co.,Ltd.,Xining，810018

Online:2014-03-10 Published:2014-03-21
Supported by:
National Science and Technology Major Project ( No. 2010ZX04001-032);Gansu Provincial Natural Science Foundation of China（No. 1308RJYA086）

摘要/Abstract

摘要：

针对机床产品的定制问题，以基本工艺元为基础将多零件工序族进行组合，建立了工艺和机床结构的映射关系，建立了机床的运动功能模型并计算完成工序族所需要的运动范围，制定了机床的运动学图谱并根据约束条件进行选择，使机床的工艺能力在多零件工序组合的加工需求变化范围内，从而实现机床的定制柔性。工艺聚类和排序为实现以工艺能力为导向的机床结构设计提供了依据，保证了设计的定制性，最后以实例进行了说明。

关键词: 工艺元, 多零件, 工序族, 构型综合

Abstract:

A process family of multi-parts was clustered based on the process units to set up the mapping relation between process and structure of the custom machine tool. A kinematic model was established, the moving range was computed and moving style was selected by constraint conditions to make the machining ability satisfy the process requirements of multi-parts, and the flexibility of the machine tool was obtained. The cluster and arrangement of the process lay the foundation for the machine tools customization design and a case was used to illustrate the method.

Key words: process unit, multi-part, process family, structure configuration synthesis

中图分类号:

TG502.1

黄华, 靳岚, 芮执元, 苟卫东. 基于多零件工序族工艺规划的机床产品构型综合设计[J]. 中国机械工程, 2014, 25(5): 608-613.

Huang Hua, Jin Lan, Rui Zhiyuan, Gou Weidong. Structure Configuration Synthesis of Machine Tools Based on Process Planning of Multi-parts[J]. China Mechanical Engineering, 2014, 25(5): 608-613.

参考文献

[1]何耀雄，徐起贺，周艳红．任意结构数控机床机构运动学建模与求解[J]．机械工程学报，2002，38(10)：31-36.
He Yaoxiong, Xu Qihe. Zhou Yanhong. Kinematic Model and its Solution for NC Machines of Arbitrary Configuration[J]. Journal of Mechanical Engineering,2002，38(10)：31-36.
[2]刘建慧,邹慧君,颜鸿森.五轴铣床运动链设计与构型综合[J].中国机械工程，2006，17(8):788-792.
Liu Jianhui, ZouHuijun, YanHongsen.Five-axis Milling Machine Kinematic Chain.Design and Structure Configuration Synthesis[J]. China Mechanical Engineering,2006，17(8):788-792.
[3]Moon Y M.Reconfigurable Machine Tool Design: Theory and Application[D].Michigan:University of Michigan,2000.
[4]Shabaka A I, Elmaraghy H A. Generation of Machine Configurations Based on Product Features[J]. International Journal of Computer Integrated Manufacturing, 2007, 4(20): 355-369.
[5]许虹．可重构机床设计理论与方法研究[D]．杭州：浙江大学，2003.
[6]Son Sungyong. Design Principles and Methodologies for Reconfigurable Machining Systems[D]. Michigan:University of Michigan, 2000.
[7]刘书暖，张振明，田锡天，等．基于聚类分析法的典型工艺路线发现方法[J]．计算机集成制造系统，2006，12(7)：996-1001.
Liu Shunuan, Zhang Zhenming, Tian Xitian,et al.Konwledge Discovery Method for Typical Process Sequence Based on Clustering Analysis[J]. Computer Integrated Manufacturing System,2006，12（7）：996-1001.
[8]王日君，张进生，葛培琪．基于运动学图谱的数控机床设计方法[J]．制造技术与机床，2009，22（3）：72-76.
Wang Rijun，Zhang Jinsheng，Ge Peiqi.Design Method of NC Machine Tool Based on Kinematics Spectrum[J]. Manufacturing Technology & Machine Tool,2009，22（3）：72-76.