基于近似因子分解法的铸造充型过程数值模拟研究

中国机械工程 ›› 2014, Vol. 25 ›› Issue (4): 546-549.

基于近似因子分解法的铸造充型过程数值模拟研究

牛晓峰1;王冠乾1;梁伟1;侯华2

1.太原理工大学,太原,030024
2.中北大学,太原,030051

出版日期:2014-02-25 发布日期:2014-03-05
基金资助:
国家自然科学基金资助项目(51304145,51301118)

Numerical Simulation of Casting Filling Process Based on Approximate Factorization Method

Niu Xiaofeng1;Wang Guanqian1;Liang Wei1;Hou Hua2

1.Taiyuan University of Technology,Taiyuan,030024
2.North University of China,Taiyuan,030051

Online:2014-02-25 Published:2014-03-05
Supported by:
National Natural Science Foundation of China（No. 51304145,51301118）

摘要/Abstract

摘要：

目前求解流动过程中速度场、压力场最常用的方法是SOLA法,在求解过程中由于需要在连续性方程、动量方程间反复迭代,所以计算效率不高。采用近似因子分解法进行速度场、压力场求解，由于在求解过程中每一步均可采用托马斯算法求解三对角方程,所以计算简单,可有效提高计算效率。最终建立了基于有限差分法的流动场数值模拟程序，并针对Benchmark件进行了充型过程流动场数值模拟，通过对比模拟结果与实验结果，验证了计算模型的正确性。

关键词: 近似因子分解法, 速度场, 压力场, 数值模拟

Abstract:

To simulate the flow patterns of casting filling,a SOLA method was used for calculating the pressure and the velocity fields.Because of repeated iteration,the computational efficiency was low.Herein,an approximate factorization scheme was applied in numerical solution of the pressure and the velocity fields.The finite difference program was established to calculate filling process.In order to demonstrate the correctness of this new program,a benchmark filling experiment was simulated.The simulated results agree very well with the experimental results and this new program can be used to properly predicate the mold filling simulation in casting.

Key words: approximate factorization method;velocity field;pressure field, numerical simulation

中图分类号:

TG244.3

牛晓峰, 王冠乾, 梁伟, 侯华. 基于近似因子分解法的铸造充型过程数值模拟研究[J]. 中国机械工程, 2014, 25(4): 546-549.

Niu Xiaofeng, Wang Guanqian, Liang Wei, Hou Hua. Numerical Simulation of Casting Filling Process Based on Approximate Factorization Method[J]. China Mechanical Engineering, 2014, 25(4): 546-549.

参考文献

[1]李德群,李阳,陈立亮,等.材料成形过程模拟技术及其应用[J].中国机械工程,2006,17(19):2005-2009.
Li Dequn,Li Yang,Chen Liliang,et al.Simulation Technology and Application for Materials Forming Processes[J].China Mechanical Engineering,2006,17(19):2005-2009.
[2]杨小宁,卜昆,刘金钢,等.陶瓷型芯结构对涡轮叶片型面精度影响的仿真研究[J].中国机械工程,2012,23(22):2689-2693.
Yang Xiaoning,Pu Kun,Liu Jingang,et al.Research on Ceramic Core Structure Influences on Surface Accuracy of Hollow Turbine Blade on Numerical Simulation[J].China Mechanical Engineering,2012,23(22):2689-2693.
[3]牛晓峰,梁伟,侯华.基于分数步长法的镁合金挤压铸造充型过程数值模拟[J].铸造技术,2013,34(5):576-579.
Niu Xiaofeng,Liang Wei,Hou Hua.Numerical Simulation of Mg-alloy Filling Process in Squeeze Casting Based on Fraction Step Method[J].Foundry Technology, 2013,34(5):576-579.
[4]赵宇宏,牛晓峰,侯华.基于FDM/FEM的镁合金挤压铸造温度场数值模拟[J].兵器材料科学与工程,2011,34(5):1-4.
Zhao Yuhong,Niu Xiaofeng,Hou Hua.Numerical Simulation of Temperature Field During Squeeze Casting Solidification Process Based on FDM/FEM[J].Ordnance Material Science and Engineering,2011,34(5):1-4.
[5]Niu Xiaofeng,Liang Wei,Zhao Yuhong,et al.A New Implicit Finite Difference Algorithm of Thermal Melt Flow in Filling Process Based on Projection Method[J].Journal of Computational and Theoretical Nanoscience,2012,9:1374-1378.
[6]Niu Xiaofeng,Liang Wei,Zhao Yuhong,et al.New Algorithm for Solving 3D Incompressible Viscous Equations Based on Projection Method[J].Transactions of Nonferrous Metals Society of China,2011,21:1826-1832.
[7]Anderson J D.Computational Fluid Dynamics[M].New York:McGraw-Hill,2007.
[8]吴颂平,刘赵淼.计算流体力学基础及应用[M].北京:机械工业出版社,2007.
[9]熊守美,许庆彦,康进武.铸造过程模拟仿真技术[M].北京:机械工业出版社,2004.
[10]Zhao Haidong,Bai Yanfei,Ouyang Xiaoxian.Simulation of Mold Filling and Prediction of Gas Entrapment on Practical High Pressure Die Castings[J].Transactions of Nonferrous Metals Society of China,2010,20(11):2064-2070.
[11]Zhao Haidong,Zhu Jindong.Modeling of Mold Filling of Al Gravity Casting and Validation with X-ray In-situ Observation[J]. Applied Mathematical Modelling,2008,32(2):185-194.

[1]	郭威, 孙洪鸣, 徐高飞, 李广伟, 周悦, 王敏健, . 全海深着陆车着底冲击特性与集中应力结构改进[J]. 中国机械工程, 2021, 32(07): 867-874.
[2]	杜飞;王新云;邓磊;夏巨谌;金俊松. 高速冲击连接技术的研究进展[J]. 中国机械工程, 2021, 32(05): 600-610.
[3]	乔巍1;姚卫星1,2. 剪滞效应对复合材料固化变形影响的数值分析[J]. 中国机械工程, 2021, 32(05): 611-616,623.
[4]	胡健1;陈泽中1;刘涛2;杨金华3. 车门防撞梁热成形工艺优化仿真与试验[J]. 中国机械工程, 2021, 32(01): 92-100.
[5]	花少震, 孟凡净, 刘华博, 丁海. [成形过程仿真优化与集成计算材料工程]注射成形熔体喷射的三维模拟及消除对策研究[J]. 中国机械工程, 2020, 31(22): 2715-2722.
[6]	胡冕;丁晓红. 热管滚珠丝杠热性能仿真和实验[J]. 中国机械工程, 2020, 31(20): 2445-2453.
[7]	王林1;潘骏1;贺青川1;丁炜2;顾利威2. 后倾式离心风机叶轮机器人焊接工艺优化[J]. 中国机械工程, 2020, 31(19): 2379-2387.
[8]	包道日娜；刘旭江；王小雪；王帅龙；刘嘉文. 小型水平轴可变偏心距风力机输出特性分析[J]. 中国机械工程, 2020, 31(18): 2196-2205.
[9]	童哲铭1；陈尧1；童水光1；余跃1；李进富2；郝国帅3. 基于NSGA-Ⅲ算法的低比转速离心泵多目标优化设计[J]. 中国机械工程, 2020, 31(18): 2239-2246.
[10]	沈建邦;肖俊华;梁希;徐耀玲. 负泊松比曲边内凹蜂窝结构的面内冲击动力学数值研究[J]. 中国机械工程, 2020, 31(16): 1998-2004.
[11]	邹伟生1;刘瑞仙1;刘少军2. 粗颗粒海底矿石浆体提升电泵研究[J]. 中国机械工程, 2019, 30(24): 2939-2944.
[12]	岳敏楠1;李春1,2;郝文星1;张俊伟1. 气动弹片对翼型气动及噪声特性的影响[J]. 中国机械工程, 2019, 30(12): 1409-1416.
[13]	梁博健1;高殿荣2. 高压水除鳞喷嘴结构参数对喷嘴射流性能的影响[J]. 中国机械工程, 2018, 29(24): 2939-2946.
[14]	罗晓龙;刘军;田始军;林立;周纯. 基于离散单元法的铝粉冲击加载过程三维数值模拟[J]. 中国机械工程, 2018, 29(20): 2515-2519.
[15]	张德荣1;吴思梦1;黄泽贵2. 基于离散相模型的水力喷砂射孔器优化设计[J]. 中国机械工程, 2018, 29(17): 2073-2080.