铰链间隙对连杆机构运动精度的重要性测度分析

摘要/Abstract

摘要：

为研究铰链间隙的不确定性对连杆机构输出误差和失效概率的贡献，以舱门机构为例，建立了其多体运动学模型。将机构部件分类为拉压杆和受弯杆，基于“等效杆长理论”，建立了运动精度模型和可靠性模型。分别采用针对输出误差和失效概率的矩独立重要性测度方法，对铰链间隙进行了重要性测度与分析，研究了铰链间隙分布参数的变化对其重要度的影响。计算和分析结果表明，铰链间隙均值的变化对重要度影响较小，标准差的变化对重要度影响较大。减小铰链间隙的标准差，能更为显著地降低其不确定性对机构输出误差和失效概率的贡献。

关键词: 铰链, 间隙, 连杆机构, 运动精度, 重要性测度

Abstract:

In order to study the contribution of the joint clearance uncertainty on the output error uncertainty of mechanism, a gear door mechanism of an airplane was taken as example to illustrate the IM of the revolute joint clearance. Firstly, the kinematic model of the mechanism was constructed. Secondly, the components of the mechanism were classified as two-force bars and bending parts. Based on the “equivalent length theory”, the motion accuracy model and reliability model of the gear door mechanism were constructed. At last, with the moment-independent IM method about motion accuracy and failure probability, the IM of joint clearance was emulated under different distribution parameters. From the emulation results one can get that the variance has a bigger affection on the importance value of the joint clearance than that of mean value.

Key words: revolute joint, clearance, linkage mechanism, motion accuracy, importance measure(IM)

中图分类号:

TB114.3

孙中超, 喻天翔, 崔卫民, 宋笔锋. 铰链间隙对连杆机构运动精度的重要性测度分析[J]. 中国机械工程, 2014, 25(21): 2874-2879.

Sun Zhongchao, Yu Tianxiang, Cui Weimin, Song Bifeng. Importance Measure of Revolute Joint Clearance about Motion Accuracy of Linkage Mechanism[J]. China Mechanical Engineering, 2014, 25(21): 2874-2879.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2014/V25/I21/2874

参考文献

[1]Bjerager P，Krenk S. Parametric Sensitivity in First Order Reliability Analysis[J]. Journal of Engineering Mechanism，1989，115(7)：1577-1582.
[2]吕震宙，宋述芳，李洪双，等. 结构机构可靠性及可靠性灵敏度分析[M]. 北京：科学出版社，2009.
[3]李璐祎，吕震宙，李维. 一种新的基本随机变量重要性测度指标体系[J]. 航空学报，2012，33(7)：1255-1264.
Li Luyi，Lü Zhenzhou，Li Wei. A New Importance Measure Index System for Basic Random Variables[J]. Acta Aeronautica et Astronautica Sinica，2012，33(7)：1255-1264.
[4]Borgonovo E. ANew Uncertainty Importance Measure[J]. Reliability Engineering and System Safety，2007，92(6)：771-784.
[5]Satelli A. Sensitivity Analysis for Importance Assessment[J]. Risk Analysis，2002，22(3)：579-590.
[6]Li Luyi，Lü Zhenzhou，Feng Jun，et al. Moment Independent Importance Measure of Basic Variable and Its State Dependent Parameter Solution[J]. Structural Safety，2012，38：40-47.
[7]Liu Qiao，Homma T. A New Computational Method of a Moment Independent Uncertainty Importance Measure[J]. Reliability Engineering & System Safety，2009，94：1205-1211.
[8]Borgonovo E，Castings W，Tarantola S. Model Emulation and Moment Independent Sensitivity Analysis：an Application to Environmental Modeling[J]. Environmental Modeling & Software，2012，34：105-115.
[9]Castings W，Borgonovo E，Morris M D，et al. Sampling Strategies in Density-based Sensitivity Analysis[J]. Environmental Modeling & Software，2012，38：13-26.
[10]Plischke E，Borgonovo E，Smith C L. Global Sensitivity Measures from Given Data[J]. European Journal of Operational Research，2013，226(3)：536-550.
[11]Wei Pengfei，Lü Zhenzhou，Yuan Xiukai. Monte Carlo Simulation for Moment Independent Sensitivity Analysis[J]. Reliability Engineering & System Safety，2013，110：60-67.
[12]李贵杰，吕震宙，宋述芳. 基本变量对失效概率重要性测度分析的新方法[J]. 力学与实践，2010，32(2)：71-75.
Li Guijie，Lü Zhenzhou，Song Shufang. A New Method for Analyzing Importance Measure of Basic Variable Effect on Failure Probability[J]. Mechanics in Engineering，2010，32(2)：71-75.
[13]成刚虎，王西珍. 全自动平压平模切机肘杆机构运动精度可靠性分析[J]. 中国机械工程，2007，18(15)：1786-1789.
Cheng Ganghu，Wang Xizhen. Reliability Analysis for Kinematics Accuracy on Elbow-bar Mechanism of Automatic Die Cutting Machine [J]. China Mechanical Engineering，2007，18(15)：1786-1789.
[14]黄玮，冯蕴雯，吕震宙，等. 考虑铰链运动副间隙的机构运动可靠性分析模型[J]. 机械强度，2007，29(2)：264-268.
Huang Wei，Feng Yunwen，Lü Zhenzhou，et al. Analytical Model of Mechanism Moving Reliability Taking Account of Kinematics Joint Gap[J]. Journal of Mechanical Strength，2007，29(2)：264-268.
[15]Flores P，Ambrosio J. Revolute Joints with Clearance in Multibody Systems[J]. Computers & Structures，2004，82(17/19)：1359-1369.
[16]Saad M，Nam H K，Nathan A，et al. Analysis of Planar Multi-body Systems with Revolute Joint Wear[J]. Wear，2010，268(5)：643-652.
[17]Lee S J，Gilmore B J. The Determination of the Probabilistic Properties of Velocities and Accelerations in Kinematic Chains with Uncertainty[J]. Journal of Mechanical Design，1991，113(1)：84-90.