基于机器视觉的液晶显示屏装配尺寸检测算法的研究

中国机械工程 ›› 2014, Vol. 25 ›› Issue (1): 7-11.

基于机器视觉的液晶显示屏装配尺寸检测算法的研究

肖敏;庄春刚;熊振华

上海交通大学，上海，200240

出版日期:2014-01-10 发布日期:2014-01-14
基金资助:
国家重点基础研究发展计划（973计划）资助项目(2013CB035804)；国家自然科学基金资助项目 (U1201244)

Measurement Algorithm of LCD Mounting Dimension Based on Machine Vision

Xiao Min;Zhuang Chungang;Xiong Zhenhua

Shanghai Jiao Tong University,Shanghai,200240

Online:2014-01-10 Published:2014-01-14
Supported by:
National Program on Key Basic Research Project (973 Program)（No. 2013CB035804）;National Natural Science Foundation of China（No. U1201244）

摘要/Abstract

摘要：

提出了一种检测液晶显示区域和外壳之间距离的算法。该算法将霍夫变换与最小二乘法结合，首先，利用Canny算子提取液晶显示区域和外壳的边缘。然后，利用霍夫变换对边缘直线进行粗定位，并依次找到直线边缘附近的所有点集。最后，利用最小二乘法进行拟合，精确地检测出图像中的直线边缘，由此计算出液晶显示区域和外壳之间的距离。实验结果表明，提出的检测算法具有较高的精度与效率，并已应用于产品的在线检测。

关键词: 液晶显示屏, 直线检测, 霍夫变换, 最小二乘拟合

Abstract:

This paper presented an algorithm to measure the distance between the displaying area and the frame of LCD. In this algorithm, a Hough transform and a least square fitting method were combined. First, the Canny operator was implemented to find the edges of the displaying area and the frame of LCD. Second, a line position with low-precision was located using the Hough transform, and the point set near the line can be detected after that. Finally, the least square fitting method was applied to obtain the precise line edges, and then the distance between the displaying area and the frame can be computed. The experiments show that the algorithm proposed herein has relatively higher precision and efficiency. The measurement algorithm has been applied to online inspection of LCD products.

Key words: LCD, line detection, Hough transform, least square fitting

中图分类号:

TP29

肖敏, 庄春刚, 熊振华. 基于机器视觉的液晶显示屏装配尺寸检测算法的研究[J]. 中国机械工程, 2014, 25(1): 7-11.

Xiao Min, Zhuang Chungang, Xiong Zhenhua. Measurement Algorithm of LCD Mounting Dimension Based on Machine Vision[J]. China Mechanical Engineering, 2014, 25(1): 7-11.

参考文献

[1]朱铮涛，姚钦，任涵文. 基于图像处理的液晶保护屏玻璃板在线尺寸检测[J]. 组合机床与自动化加工技术，2010(3)：55-58.
Zhu Zhengtao，Yao Qin，Ren Hanwen. Realtime Dimensional Inspection of LED Protection Screen Based on Image Processing[J]. Modular Machine Tool & Automatic Manufacturing Technique，2010(3)：55-58.
[2]伍济钢，宾鸿赞. 机器视觉的薄片零件尺寸检测系统[J]. 光学精密工程，2007，15(1)：124-129.
Wu Jigang，Bin Hongzan. Dimensional Inspection System of Thin Sheet Parts Based on Machine Vision[J]. Optics and Precision Engineering，2007，15(1)：124-129.
[3]张舞杰，李迪，叶峰. 基于视觉的贴片元件检测算法[J]. 华南理工大学学报(自然科学版)，2010，38(1)：65-69.
Zhang Wujie，Li Di，Ye Feng. Vision Based Inspection Algorithm for Chip Components[J]. Journal of South China University of Technology，2010，38(1)：65-69.
[4]袁继栋，杨波，郑煜，等. 高精度直线检测算法研究和误差分析[J]. 现代制造工程，2011(2)：19-23.
Yuan Jidong，Yang Bo，Zheng Yu，et al. Research on High Precision Line Detection Method and Error Analysis[J]. Modern Manufacturing Engineering，2011(2)：19-23.
[5]崔彦平，葛杏卫，张洪亮. 机械零件直线边缘亚像素定位方法研究[J]. 半导体光电，2010，31(5)：797-800.
Cui Yanping，Ge Xinwei，Zhang Hongliang. Study on Beeline Edge Subpixel Localization for Mechanical Part[J]. Semiconductor Optoelectronics，2010，31(5)：797-800.
[6]周云燕，杨坤涛. 基于RHT-LSM直线检测方法的研究[J]. 光电工程，2007，34(1)：55-58.
Zhou Yunyang，Yang Kuntao. Method for Line Detection Based on RHT-LSM[J]. Opto-Electronic Engineering，2007，34(1)：55-58.
[7]司永胜，姜国权，刘刚，等. 基于最小二乘法的早期作物行中心线检测方法[J]. 农业机械学报，2011，41(7)：163-167.
Si Yongsheng，Jiang Guoquan，Liu Gang，et al. Early Stage Crop Rows Detection Based on Least Square Method[J]. Transactions of the Chinese Society for Agricultural Machinary，2011，41(7)：163-167.
[8]贺忠海，王宝光，廖怡白. 理想边缘产生方法的研究[J]. 光学精密工程，2002，10(1)：89-93.
He Zhonghai，Wang Baoguang，Liao Yibai. Study of Method for Generating Idea Edges[J]. Optics and Precision Engineering，2002，10(1)：89-93.