楔形间隙中受剪颗粒介质及表面多体接触的瞬态过程分析

摘要/Abstract

摘要：

应用显式有限元方法研究了颗粒介质在楔形摩擦副中的受剪切行为,其中下表面具有与颗粒介质尺度接近的连续凸峰。数值试验表明,显式有限元方法能够捕捉颗粒介质的受剪切行为、碰撞和挤压前后的应力分布、颗粒的塑性变形等。发现了当颗粒多体接触并形成强力链时,会使摩擦界面产生摩擦力和抬升力的峰值。同时探讨了不同的摩擦因数和材料硬度对颗粒介质的应力分布、摩擦力和抬升力的影响。


关键词: 楔形间隙, 颗粒介质, 多体接触, 有限元, 力链

Abstract:

Explicit FEA was used to study the shear behavior of granular media in a wedge-shaped gap, and the asperities whose sizes were close to the scale of granules was constructed on the lower boundary surface. The results of numerical experiments have proved that the explicit FEM can capture the shear behavior of granular media and the stress distribution before and after the collision as well as granule deformation. When the granules contact with each other and form a strong multi-body chain, peak value of friction force and uplift force will occur. In addition, the influences of friction coefficient and material hardness on the stress distribution, friction force and uplift force were discussed.

Key words: wedge-shaped gap, granular media, multi-body contact, finite element method (FEM), force chain

中图分类号:

TH117.1

王伟, 刘小君, 刘焜. 楔形间隙中受剪颗粒介质及表面多体接触的瞬态过程分析[J]. 中国机械工程, 2013, 24(3): 366-370.

WANG Wei, LIU Xiao-Jun, LIU Kun. Transient Process Analysis on Multi-body Contact between Granules and Surfaces under Shearing in a Wedge-shaped Gap[J]. China Mechanical Engineering, 2013, 24(3): 366-370.

参考文献

[1]谭援强, 李艺, Sheng Y. 磨粒流加工的固液两相流模型及压力特性模拟[J]. 中国机械工程,2008,19(4):439-441,497.
Tan Yuanqiang, Li Yi, Sheng Y. On the Model and Pressure Simulation of Solid-fluid Two Phase Flow for Abrasive Flow Machining[J]. China Mechanical Engineering, 2008,19(4):439-441,497.
[2]徐进, 雒建斌, 路新春,等. 超精密表面抛光材料去除机理研究进展[J]. 科学通报,2004(17):1700-1705.
Xu Jin, Luo Jianbin, Lu Xinchun, et al. Progress of the Material Removal Mechanism in Chemical Mechanical Polishing[J]. Chinese Science Bulletin, 2004(17):1700-1705.
[3]Mali H S, Manna A. Current Status and Application of Abrasive Flow Finishing Processes: A Review[J]. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture,2009, 223(7):809-820.
[4]王伟, 刘焜. 颗粒流润滑的现状和展望[J]. 摩擦学学报,2008,28(6):567-575.
Wang Wei, Liu Kun. Review and Prospect of Particulate Lubrication[J]. Tribology, 2008, 28(6):567-575.
[5]方亮, 杜道山, 张晓峰,等. 三体磨损中材料塑性变形磨损的数值模拟[J]. 西安交通大学学报,2003，37(3):268-272.
Fang Liang, Du Daoshan,Zhang Xiaofeng, et al. Numerical Simulation of Plastic Deformation Wear Rate of Materials under Three-Body Abrasion[J]. Journal of Xi’an Jiaotong University, 2003，37(3):268-272.
[6]Godet M. The 3rd-Body Approach-a Mechanical View of Wear[J]. Wear,1984,100(1/3):437-452.
[7]郑靖, 于海洋, 周仲荣. 天然牙和树脂牙体外三体磨粒磨损性能研究[J]. 摩擦学学报,2004,24(6):568-571.
Zheng Jing, Yu Haiyang, Zhou Zhongrong.Comparative Study of the Three-Body Abrasive Wear Behavior of Natural Human Teeth and Plastic Teeth[J]. Tribology, 2004,24(6):568-571.
[8]王伟, 刘小君, 焦明华,等. 滑块运动和形位参数对颗粒流润滑特性的影响规律[J]. 机械工程学报,2009,45(7):101-107.
Wang Wei, Liu Xiaojun, Jiao Minghua,et al. Influences of Several Slider’s Parameters on Particles Flow Lubrication Characteristics[J]. Journal of Mechanical Engineering,2009,45(7):101-107.
[9]Elkholy K N, Khonsari M M. Experimental Investigation on the Stick-Slip Phenomenon in Granular Collision Lubrication[J]. Journal of Tribology-Transactions of the Asme,2008,130(2):021302-1-7.
[10]Yu C M, Tichy J. Granular Collisional Lubrication: Effect of Surface Roughness, Particle Size and Solids Fraction[J]. Tribology Transactions,1996,39(3):537-546.
[11]张伯平, 王伟, 刘焜. 颗粒介质双筒剪切单元摩擦阻力的研究[J]. 中国机械工程,2011,22(15):1832-1836.
Zhang Bopin, Wang Wei, Liu Kun. Research on Friction Resistance of Circular Shear Cell Filled with Steel Granule[J]. China Mechanical Engineering, 2011,22(15):1832-1836.
[12]Iordanoff I, Elkholy K, Khonsari M M. Effect of Particle Size Dispersion on Granular Lubrication Regimes[J]. Proceedings of the Institution of Mechanical Engineers, Part J(Journal of Engineering Tribology),2008,222(6): 725-739.

[1]	胡超, 刘佐民. 基于材料匹配性的球轴承Heathcote黏-滑模型研究 [J]. J4, 201016, 21(16): 1969-1973.
[2]	董国疆, 赵长财, 曹秒艳, 郝海滨, 杨东峰. 圆筒件固体颗粒介质成形壁厚及变形规律研究 [J]. J4, 201016, 21(16): 1992-1998.
[3]	许鹏, 曾泓茗, 朱晨露, 王平, 耿明, 许勇. [车辆工程与测控]基于增强磁场涡流的高速轨道缺陷检测方法[J]. 中国机械工程, 2021, 32(04): 454-459,466.
[4]	许谦1，2;胡广旭3;董志波4;任新星4;方洪渊4. 基于相变与收缩耦合的1Cr12焊缝冷却动态力学行为[J]. 中国机械工程, 2021, 32(03): 341-347.
[5]	秦勤1,2；何流1；李程2；臧勇1. 铜铝复合板渐进成形回弹缺陷研究[J]. 中国机械工程, 2021, 32(03): 348-356.
[6]	刘志鹏;周杰;王时龙;王四宝;杨文翰. 基于有限元的多股螺旋弹簧疲劳寿命预测[J]. 中国机械工程, 2021, 32(02): 141-146.
[7]	付青云1;李笑1;李树1;彭伟鸿1;关婷2. 体外磁控内置式尿道阀仿真与实验研究[J]. 中国机械工程, 2021, 32(02): 156-162，170.
[8]	陈光1;赵长财1;杨卓云1;董国疆2;曹秒艳3. Q235覆管对AA5052铝合金基管颗粒介质胀形行为的影响[J]. 中国机械工程, 2021, 32(01): 101-110.
[9]	刘萌, 单忠德, 李新亚, 臧勇, 黄江华. [材料成形中的数字化与智能化产品设计]6016铝合金汽车典型结构件固溶成形工艺研究[J]. 中国机械工程, 2020, 31(22): 2648-2654.
[10]	张大志, 管明升, 张清东, 王爱国, 周新亮. [成形过程仿真优化与集成计算材料工程]限动芯棒连轧管机轧制过程轧件变形行为及规律仿真[J]. 中国机械工程, 2020, 31(22): 2691-2698.
[11]	徐勇, 李明, 夏亮亮, 张士宏, . [材料绿色成形技术]异形排气管多向局部加载液力成形工艺[J]. 中国机械工程, 2020, 31(22): 2763-2771.
[12]	张耀满;暴凤旭;齐培宁. 滚珠丝杠螺母副热态特性建模方法[J]. 中国机械工程, 2020, 31(20): 2486-2490,2496.
[13]	王林1;潘骏1;贺青川1;丁炜2;顾利威2. 后倾式离心风机叶轮机器人焊接工艺优化[J]. 中国机械工程, 2020, 31(19): 2379-2387.
[14]	岳彩旭;刘鑫;刘智博;谢娜;王彦武. 基于有限元仿真的拼接模具铣削用刀具优化[J]. 中国机械工程, 2020, 31(17): 2085-2094.
[15]	徐亭亭, 罗敏, 蒋佳骏, 王晶, 张佳贺. 管内可控铰接柔性结构双层接触非线性力学分析[J]. 中国机械工程, 2020, 31(15): 1798-1807,1814.