层绞式综合缆参数化建模及强度分析研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (17): 2289-2284.

层绞式综合缆参数化建模及强度分析研究

张振洲;仲梁维

上海理工大学,上海,200093

出版日期:2013-09-10 发布日期:2013-09-22
基金资助:
国家自然科学基金资助项目（51205255）
National Natural Science Foundation of China（No. 51205255）

Research on Parametric Modeling and Strength Analysis of Strand Loose Tube Composite Cable

Zhang Zhenzhou;Zhong Liangwei

University of Shanghai for Science and Technology,Shanghai,200093

Online:2013-09-10 Published:2013-09-22
Supported by:
National Natural Science Foundation of China（No. 51205255）

摘要/Abstract

摘要：

为了提高层绞式综合缆建模效率和精度,研究了其强度分析方法,通过对圆柱螺旋线方程的分析,采用一种基于抗拉强度数学模型的参数化建模方法并用ANSYS进行了静强度分析。基于知识工程建立了强度设计与有限元分析结合的参数化分析系统,并实现了快速建模及强度分析。实例验证了该方法的正确性和可靠性。

关键词: 层绞式综合缆, 参数化建模, 静强度分析, 强度设计, 知识工程

Abstract:

In order to improve the efficiency and accuracy of strand loose tube composite cable and research its strength analysis method, after the analysis on the equation of circular helix, the methods of parametric modeling and static strength analysis using ANSYS were used, which were based on the mathematical model of tensile strength. The system was combined strength design and finite element analysis which was based on knowledge engineering achieved rapid modeling and strength analysis. The way is demonstrated to be correctness and reliability with the results.

Key words: strand loose tube composite cable, parametric modeling;static strength analysis;strength design;knowledge engineering

中图分类号:

TH114
TH128

张振洲, 仲梁维. 层绞式综合缆参数化建模及强度分析研究[J]. 中国机械工程, 2013, 24(17): 2289-2284.

Zhang Zhenzhou;Zhong Liangwei. Research on Parametric Modeling and Strength Analysis of Strand Loose Tube Composite Cable[J]. China Mechanical Engineering, 2013, 24(17): 2289-2284.

参考文献

[1]虞春.ADSS光缆设计与制造[J].光纤与电缆及其应用技术,2002(1):32-38.
[2]郑清忠[1].GYXTEW型光缆结构尺寸优化设计[J].电线电缆,2004(6):18-20.
[3]徐继东,陆国梁.高强度光电综合缆强度探讨[J].光纤与电缆及其应用技术,2000(1):39-43.
[4]林开泉[1],王红霞[1],张雁龙[2],刘红亮[1].基于有限元法对海底光缆抗锚害的研究[J].光纤与电缆及其应用技术,2010(6):38-41.
[5]罗良玲,刘旭波.基于时间分割法的圆柱螺旋线直接插补算法[J].南昌大学学报：工科版,2001,23(4):57-59.
[6]Worzyk T. Submarine Power Cables : Design, Instal- lation, Repair, Environmental Aspects [M]. New York : Springer- verlag Berlin Heidelberg, 2009.
[7]Kazuo Hogari, Yusuke Yamada, Kunihiro Toge. Design and Performance of Ultra- high-density Optical Fiber Cable with Rollable Optical Fiber Rib- bons[J]. Optical Fiber Technology, 2010,16 (4) : 257-263.
[8]俞兴明[1],李寰[2].大芯数松套层绞式光缆的结构参数设计和拉伸性能测试[J].苏州市职业大学学报,2010,21(1):19-21.
[9]虞春,唐小川,李波,陈林.光缆结构强度设计与分析[J].现代有线传输,2003(1):11-14.
[10]Wan Y Z,Wang Y L,He F. Mechanical Perform- ance of Hybrid Bismaleimide Composites Rein- forced with Three- dimensional Braided Carbon and Kevlar Fabrics[J] Composites Part A: Ap- plied Science and Manufacturing, 2007, 38:495 - 504.
[11]Todd M. Sheave-bending and Tensile Fatigue of Aramid-fiber Strength Members for Communica- tions Cables[J]. International Journal of Fatigue, 2000,22 : 121-135.
[12]王瑛剑[1],胡俊波[1],董俊宏[1].海底光缆结构参数优化数学模型[J].光纤与电缆及其应用技术,2005(6):15-18.
[13]王宇飞[1],成琦[2],许德玲[2],于沅琳[2].柔软光电综合缆的设计[J].光纤与电缆及其应用技术,2012(4):21-23.
[14]鲁玉军[1],邓心伟[1],王春青[2].支持大批量定制的知识管理方法研究[J].中国机械工程,2012,23(13):1561-1566.
[15]钟诗胜[1],王体春[1],王威[2].基于子空间法的多级实例分类检索与匹配模型[J].中国机械工程,2009,20(7):767-772.
[16]刘志峰[1],高洋[1],胡迪[1],张敬东[1].基于TRIZ与实例推理原理的产品绿色创新设计方法[J].中国机械工程,2012,23(9):1105-1111.
[17]Calder M,Morris R A,Peri F. Machine Reasoning about Anomalous Sensor Data[J]. Ecological In- formatics,2010,5(1) :9-18.
[18]Gosling P D,Korban E A. A Bendable Finite Ele- ment for the Analysis of Flexible Cable Structures[J]. Finite Elements in Analysis and Design, 2001,38(1) :45-63.