时域三点法测量直线度信息高精度获取方法研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (13): 1733-1737.

时域三点法测量直线度信息高精度获取方法研究

王鹏;余晓芬;孟凡良;刘媛媛

合肥工业大学，合肥，230009

出版日期:2013-07-10 发布日期:2013-07-11

Research on Accurate Information Acquisition of Straightness Errors with Time-domain Three-point Method

Wang Peng;Yu Xiaofen;Meng Fanliang;Liu Yuanyuan

Hefei University of Technology,Hefei,230009

Online:2013-07-10 Published:2013-07-11

摘要/Abstract

摘要：

常规时域三点法在直线度误差测量中会把零位和随机误差的影响迭代放大，使得直线度重构曲线失真，无法得到正确的直线度误差。通过对常规时域三点法数据处理误差放大机理进行研究，提出了基于比较消除法的误差等效均化的处理办法，并利用仿真和实验证实了其有效性和实用性。优化了时域三点法的直线度测量，使得直线度信息高精度获取成为可能。

关键词: 时域三点法, 直线度误差, 比较消除法, 误差等效均化处理法

Abstract:

In the field of straightness measurement, the zero errors and random errors would increase quickly within a few iterations if conventional time-domain three-point method was used.As a result,the reconstruction of the straightness curve was distorted, thus the correct straightness error can not be obtained.A error-equivalent-averaging method based on comparing-then-elimination approach was proposed herein, and its effectiveness and practicality were also proved by simulations and experiments. Accordingly time-domain three-point method was optimized,thus it is possible to obtain straightness information accurately.

Key words: time-domain three-point method, straightness error, relatively elimination method, error-equivalent-averaging method

中图分类号:

王鹏, 余晓芬, 孟凡良, 刘媛媛. 时域三点法测量直线度信息高精度获取方法研究[J]. 中国机械工程, 2013, 24(13): 1733-1737.

WANG Feng, TU Xiao-Fen, MENG Fan-Liang, LIU Yuan-Yuan. Research on Accurate Information Acquisition of Straightness Errors with Time-domain Three-point Method[J]. China Mechanical Engineering, 2013, 24(13): 1733-1737.

参考文献

[1]孙宝寿，张玉.三点法EST测量直线度的误差分析[J].宇航计测术,1996,16(2):25-29.
Sun Baoshou,Zhang Yu. Error Analysis of Measuring Straightness with Three Point Method EST[J].Journal of Astronautic Metrology and Measurement,1996,16(2):25-29.
[2]张镭，张玉.时域二点法和三点法直线度EST的误差分析[J].仪器仪表学报,1998,19(1):659-662.
Zhang Lei,Zhang Yu.Error Analysis of Measuring Straightness with Two Point and Three Point Method EST[J]. Chinese Journal of Scientific Instrument,1998,19(1):659-662.
[3]李自军，洪迈生，叶飞帆,等.先行分离直行运动误差的二次相移三点法[J]．上海交通大学报,1995,36(8):1057-1063.
Li Zijun, Hong Maisheng, Ye Feifan,et al.Quadratic Phase Shift Three-point Method through Which Linear Motion Error Can Be Separated and Gained Firstly[J].Journal of Shanghai Jiao Tong University,1995,36(8):1057-1063.
[4]李圣怡，谭捷，潘培元.精密三点法—在线测量精密机床直线度的新方法[J].国防科技大学学报,1993,15(3):103-107.
Li Shengyi, Tan Jie, Pan Peiyuan.FSTRP-a New Method for On-line Measurement of the Straightness of Precision Lathe[J]. Journal of National University of Defense Technology,1993,15(3):103-107.
[5]张军峰，王燕燕.EST法测量机床导轨直线度误差分析[J].机床与液压,2010,38(3):46-49.
Zhang Junfeng, Wang Yanyan. Error Analysis on Guideway Straightness of Machine Tool Based on EST[J].Machine Tool & Hydraulics,2010,38(3):46-49.
[6]黄富贵，崔长彩.评定直线度误差的最小二乘法与最小包容区域法精度之比较[J].光学精密工程,2007,15(6):889-892.
Huang Fugui, Cui Changcai. Comparison of Evaluating Precision of Straightness Error between Least Square Method and Least Envelope Zone Method[J].Optics and Precision Engineering,2007,15(6):889-892.
[7]Hwang Jooho, Park Chun-Hong, Gao Wei,et al.Three-probe System for Measuring the Parallelism and Straightness of a Pair of Rails for Ultra-precision Guideways[J].International Journal of Machine Tools & Manufacture,2007,47: 1053-1058.
[8]Tanaka H, Sato H. Extensive Analysis and Development of Straightness Measurement by Sequential Two-point Method[J]. Transactions of the ASME, 1986,108:176-182.