叠层芯片温度测量实验研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (12): 1563-1567.

叠层芯片温度测量实验研究

仇风神;韩雷

中南大学,长沙,410083

出版日期:2013-06-25 发布日期:2013-07-11
基金资助:
国家重点基础研究发展计划（973计划）资助项目（2009CB724203）
National Program on Key Basic Research Project (973 Program)（No. 2009CB724203）

Experimental Study of Temperature Measurement for Stacked Die Chip

Qiu Fengshen;Han Lei

Central South University,Changsha,410083

Online:2013-06-25 Published:2013-07-11
Supported by:
National Program on Key Basic Research Project (973 Program)（No. 2009CB724203）

摘要/Abstract

摘要：

使用MP/MB红外测温仪对加热台及叠层芯片的结构表面进行测试,对所获得的温度数据进行分析建模。实验发现叠层芯片结构表面悬臂区域和非悬臂区域的温度存在差异,并讨论了其原因。进一步对不同区域的温度曲线进行拟合,发现修改的Logistic模型可以很好地用于叠层芯片结构测温数据的建模和阐释其温升机制缘由。实验结果有助于叠层芯片悬臂键合动力学机理的研究。

关键词: 叠层芯片, 温度测量, 悬臂与非悬臂区域, 红外测温仪

Abstract:

A MP/MB infrared radiation thermometer was used to measure the temperatures of the heat stage and the structural surface of the stacked die chip,and the results were analyzed and then modeled.Experimental results include temperature difference of the cantilever and non-cantilever area of the stacked die chip;and the reason discussion.Through the curve fitting of the temperatures of the different
areas,it is found modified Logistic model can be used to understand the
stacked die chip structure thermometry data modeling and the temperature rise mechanism properly.The results will be helpful to further studies of
the cantilever bonding kinetic mechanism.

Key words: stacked die chip, temperature measurement, cantilever and non-cantilever area, infrared radiation thermometer

中图分类号:

TN219

仇风神, 韩雷. 叠层芯片温度测量实验研究[J]. 中国机械工程, 2013, 24(12): 1563-1567.

CHOU Feng-Shen, HAN Lei. Experimental Study of Temperature Measurement for Stacked Die Chip[J]. China Mechanical Engineering, 2013, 24(12): 1563-1567.

参考文献

[1]张德洪[1].TSOP叠层芯片封装的介绍[J].半导体行业,2007(6).
[2]Li Junhui,Deng Luhua, Ma Bangke, et al. Investiga- tion of the Characteristics of Overhang Bonding for 3-D Stacked Dies in Microelectronics Packaging rJJ. Microelectronics Reliability, 2011,51 (12) : 2236 -2242.
[3]Ho Jengrong, Chen Chunchou, Wang Chenhao. Thin Film Thermal Sensor for Real Time Measurement of Contact Temperature During Ultrasonic Wire Bonding ProcessJ. Sensors and Actuators, 2004, 111(2/3) :188-195.
[4]隆志力韩雷吴运新等.热超声键合过程的温度因素影响规律研究.焊接学报,2005,2(68):23-38.
[5]Mayer M, Paul O, Daniel B, et al. Integrated Tem- perature Microsensors for Characterization and Op- timization of Thermosonic Ball Bonding Process[J]. IEEE Trans. on Components and Packing Technol- ogies, 2000,23 (2) : 393-398.
[6]孟艳[1].超声引线键合过程的瞬态温度特性[J].科学技术与工程,2005,5(10):673-675.
[7]Suzuki S,Kennedy F E. Measurement of Flash Tem- perature and Contact between Slider and Magnetic Recording Ibisk[C]//IEEE Trans. Magn. Journals Magazines. Ibaraki Japan: IEEE Magnetic Socie- ty, 1989 : 3728-3730.
[8]Suman S, Gaitan M, Yogendra J, et al. Wire- bond- ing Process Monitoring Using Thermopile Temper- ature Sensor[J]. IEEE Trans. on Advanced Packa- ging,2005,28(4) :685-693.
[9]李军,刘梅冬,曾亦可,李楚容,郭明金,黄焱球,刘少波,夏冬林.非接触式红外测温的研究[J].压电与声光,2001,23(3):202-205.
[10]Shphgd Coperation. Metis MP25MB07 Infrared Radiationthermometer [ EB/OL]. [ 2012 - 3 - 15 ]. http ://www. shphgd, com.
[11]余养伦[1],于文吉[1],江泽慧[1],王天佑[1].单板层积材热压升温曲线数值模拟的研究[J].材料热处理学报,2007,28(1):130-133.
[12]李爱民[1],刘杉[2],吕安民[3].logistic模型中饱和值确定方法的研究[J].郑州大学学报：理学版,2011,43(1):118-121.
[13]黄小青.指数增长模型和Logistic增长模型的比较[J].广西民族学院学报：自然科学版,2002,8(2):29-33.