油膜厚度对闭式液体静压导轨性能的影响

中国机械工程 ›› 2013, Vol. 24 ›› Issue (11): 1421-1424,1430.

油膜厚度对闭式液体静压导轨性能的影响

赵建华1,2;高殿荣1,2

1.燕山大学先进锻压成形技术与科学教育部重点实验室,秦皇岛,066004
2.燕山大学河北省重型机械流体动力传输与控制实验室,秦皇岛,066004

出版日期:2013-06-10 发布日期:2013-06-04
基金资助:
国家自然科学基金资助项目(51075348)；河北省自然科学基金资助项目(E2011203151)；高等学校博士学科点专项科研基金资助项目(20101333110002)
National Natural Science Foundation of China（No. 51075348）;

Hebei Provincial Natural Science Foundation of China（No. E2011203151）;
Research Fund for the Doctoral Program of Higher Education of China（No. 20101333110002）

Influence of Oil Film Thickness on Characteristics of Closed Type Hydrostatic Slide

Zhao Jianhua1,2;Gao Dianrong1,2

1.Key Laboratory of Advanced Forging & Stamping Technology and Science, Ministry of Education of China,Yanshan University,Qinhuangdao,Hebei,066004
2.Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control,Yanshan University,Qinhuangdao,Hebei,066004

Online:2013-06-10 Published:2013-06-04
Supported by:

National Natural Science Foundation of China（No. 51075348）;

Hebei Provincial Natural Science Foundation of China（No. E2011203151）;
Research Fund for the Doctoral Program of Higher Education of China（No. 20101333110002）

摘要/Abstract

摘要：

为了研究油膜厚度对静压支承的影响,以闭式液体静压导轨为研究对象,确定了导轨系统的初始参数;基于力平衡方程及流量方程,建立了功率损失、静态性能、动态性能的数学模型;将总功率损失、承载能力和静刚度、固有频率、调整时间和动刚度等参数作为导轨的性能指标,利用MATLAB软件定量分析了油膜厚度对导轨性能的影响。研究结果表明：增大油膜厚度,则液体静压导轨的总功率损失增大,调整时间变长,承载能力不变,静刚度、固有频率及动刚度减小。因此,减小油膜厚度,可降低导轨总功率损失,提高静态性能和动态性能。研究结果为工程实际中闭式液体静压导轨静压油膜的设计提供了理论依据。

关键词: 油膜厚度, 液体静压导轨, 功率损失, 承载能力, 固有频率, 动刚度

Abstract:

In order to analyze the influence of oil film thickness on the characteristics of a hydrostatic bearing system, the initial parameters of the closed type liquid hydrostatic slide were determined. According to the force balance equation and the flow equation, mathematical models of the power loss, the static characteristics and the dynamic characteristics were established. The power loss, bearing capacity, static stiffness, natural frequency, adjusting time, dynamic stiffness can be as the indexes, the influence of the oil film thickness on the slide characteristics were analyzed quantitatively with MATLAB. The research shows that the more the oil film thickness, the larger the power loss, the longer the adjusting time, the poorer the natural frequency, the static stiffness and the dynamic stiffness, but the bearing capacity keeps constant. So the thickness of oil film can be decreased in order to decrease the power loss and to improve the static and dynamic characteristics of the slide system. The proposed research analyzes the influence of the oil film thickness on the characteristic of closed type liquid hydrostatic slide, and provides a theoretical basis for design of the oil film in practical engineering.

Key words: thickness of oil film, liquid hydrostatic slide, power loss, bearing capacity, natural frequency, dynamic stiffness

中图分类号:

TH137

赵建华1, 2, 高殿荣1, 2. 油膜厚度对闭式液体静压导轨性能的影响[J]. 中国机械工程, 2013, 24(11): 1421-1424,1430.

DIAO Jian-Hua-1, 2, GAO Dian-Rong-1, 2. Influence of Oil Film Thickness on Characteristics of Closed Type Hydrostatic Slide[J]. China Mechanical Engineering, 2013, 24(11): 1421-1424,1430.

参考文献

[1]Harigaya Y, Suzuki M, Toda F, et al. Analysis of Oil Film Thickness and Heat Transfer on a Piston Ring of a Diesel Engine: Effect of Lubricant Viscosity[J]. Journal of Engineering for Gas Turbines and Power, 2006, 128(3):685-693.
[2]Harigaya Y, Suzuki M, Takiguchi M. Analysis of Oil Film Thickness on a Piston Ring of Diesel Engine-Effect of Oil Film Temperature[C]//Proceedings of the 2001 Spring Technical Conference of the ASME Internal Combustion Engine Division. Philadelphia, 2001: 19-27.
[3]Zhang Yanqin, Xu Xiaoqiu, Yang Xiaodong, et al. Analysis on Influence of Oil Film Thickness on Temperature Field of Heavy Hydrostatic Bearing in Variable Viscosity Condition[C]//2011 International Conference on Chemical Engineering and Advanced Materials. Changsha, 2010: 1181-1185.
[4]Dhar A, Agarwal A K, Saxena V. Measurement of Dynamic Lubricating Oil Film Thickness between Piston Ring and Liner in a Motored Engine[J]. Sensors and Actuators, A: Physical, 2009, 149(1):7-15.
[5]邵俊鹏, 张晓彤. 液体静压导轨油膜厚度的控制方案[J]. 节能技术, 2006, 24(6):558-561.
Shao Junpeng, Zhang Xiaotong. Control Schemes of Oil Film Thickness for Hydrostatic Slide[J]. Energy Conservation Technology, 2006, 24(6):558-561.
[6]刘剑平, 张新义, 贾庆轩, 等. 流变模型对剪切稀化流体弹流油膜厚度影响的研究[J]. 中国机械工程, 2011, 22(20):2415-2418.
Liu Jianping, Zhang Xinyi,Jia Qingxuan,et al. Effects of Rheological Model on Elastohydrodynamic Film Fhickness for Shear-thinning Lubricants[J]. China Mechanical Engineering, 2011, 22(20):2415-2418.
[7]中国润滑油信息网. 润滑油粘度计算[EB/OL]. [2008-04-12].http://www.sinolub.com/page/nwjs.html?jd fwkey=nigxv.
[8]李兴虎, 赵晓静. 润滑油粘度的影响因素分析[J]. 润滑油, 2009, 24(6): 59-64.
Li Xinghu, Zhao Xiaojing. Analysis of Factors Affecting Lubricant Viscosity[J]. Lubricating Oil, 2009, 24(6):59-64.
[9]彭小飞,俞小莉,夏立峰,等.低浓度纳米流体粘度变化规律试验[J].农业机械学报,2007,38(4):138-150.
Peng Xiaofei, Yu Xiaoli, Xia Lifeng, et al. Viscosity of Low Concentration Nanofluids[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(4):138-150.
[10]丁振乾. 流体静压支承设计[M]. 上海:上海科学技术出版社, 1989.
[11]谭杰锋, 高温. 高等数学[M]. 北京:清华大学出版社, 2010.
[12]孔祥东, 王益群. 控制工程基础[M]. 北京:机械工业出版社, 2007.

[1]	阚君武;何恒钱;王淑云;廖卫林;张忠华;陈松;吴亚奇. 基于压电简支梁拉伸调频的旋磁发电机[J]. 中国机械工程, 2019, 30(23): 2857-2862.
[2]	江锦波;徐奇超;陈源;赵文静;彭旭东. 端面型槽广义对数螺旋线的通用模型与应用[J]. 中国机械工程, 2019, 30(22): 2661-2667.
[3]	陆龙生;张飞翔;唐恒;万珍平;汤勇. 基于优化承载能力的RV减速器摆线齿轮齿廓的等距-移距修形[J]. 中国机械工程, 2019, 30(17): 2022-2029.
[4]	崔亚亚1;白振华1,2;李小峰1;姜明光1. 二次冷轧过程变形区油膜厚度模型[J]. 中国机械工程, 2019, 30(05): 560-567.
[5]	周超1，2;张兴中1;刘平飞1;关杰3. 连铸结晶器非正弦振动装置建模与固有特性分析[J]. 中国机械工程, 2018, 29(16): 1921-1926.
[6]	孔璞萍;刘志平;周凯;毛艳飞. 起重机金属结构裂纹的复合修复方法[J]. 中国机械工程, 2018, 29(13): 1610-1614.
[7]	李永泉1，2;佘亚中2，3;万一心1，2;张立杰2，3. 球面两自由度冗余驱动并联机器人弹性动力学分析[J]. 中国机械工程, 2018, 29(10): 1179-1185.
[8]	孟聪;陈川;杨玉虎. RV减速器模态特性分析[J]. 中国机械工程, 2018, 29(01): 8-13.
[9]	陈剑;戎芳明. 货车转向系统结构振动特性测试与优化[J]. 中国机械工程, 2017, 28(20): 2463-2466,2492.
[10]	刘文光, 郭隆清, 贺红林, 颜龙. 基于固有频率的呼吸式裂纹梁损伤识别方法[J]. 中国机械工程, 2017, 28(06): 702-707,713.
[11]	史恩秀;郭鹏阁;王海龙. 一种改善静压导轨机械特性的新方法[J]. 中国机械工程, 2016, 27(24): 3278-3282.
[12]	高梦迪, 刘志峰, 王勇. 三相异步电动机效率特性快速量化方法[J]. 中国机械工程, 2016, 27(13): 1755-1759.
[13]	苑飞虎, 赵铁石, 赵延治, 翁大成. 并联机构承载能力分析[J]. 中国机械工程, 2015, 26(7): 871-877.
[14]	程小勇, 陈果, 刘明华, 郑其辉, 罗云, 侯民利, 蒲柳. 初始安装应力对管道固有频率的影响分析及试验验证[J]. 中国机械工程, 2015, 26(4): 512-517.
[15]	李广慧, 尹凝霞, 徐红, 谭光宇. 嵌入式测温工具系统的结构设计及模态分析[J]. 中国机械工程, 2015, 26(21): 2862-2866.