[1]伍太宾，任广升．汽车差速器锥齿轮温锻制坯/冷摆辗成形加工技术研究[J]．中国机械工程，2005，16(12)：1106-1109.
Wu Taibin, Ren Guangsheng.Research on Warm Forging/Cold Orbital Forming Technology for the Straight Bevel Gear in Differential Case[J]. China Mechanical Engineering, 2005, 16(12):1106-1109.
[2]胡亚民，华林，赖周艺，等．汽车摩托车齿轮类零件的冷摆辗精密成形[J] ．中国机械工程，2006，17(增刊): 140-143.
Hu Yamin, Hua Lin, Lai Zhouyi，et al．The Technology of Cold Precision Orbital Forming of Various Gears in Automobile and Autobicycle[J]. China Mechanical Engineering, 2006,17(S1):140-143.
[3]楼铭，李永兵，黄舒彦，等．模钉体积比对异种金属自冲铆接接头成形性能影响分析[J]．中国机械工程, 2009，20(15)：1873-1876.
Lou Ming, Li Yongbing, Huang Shuyan，et al．Influence of Die-rivet Volume Ratio on Forming Performance of Self-piercing Riveting Joints of Dissimilar Materials[J]. China Mechanical Engineering, 2009, 20(15):1873-1876.
[4]黄志超，刘晓坤，夏令君，等．自冲铆接、无铆钉铆接与电阻点焊强度对比试验研究[J]．中国机械工程，2012，23(20)：2487-2491．
Huang Zhichao, Liu Xiaokun, Xia Lingjun，et al．Joining Strength Comparison among Self-piercing Riveting, Clinching and Resistance Spot Welding[J]. China Mechanical Engineering, 2012, 23(20): 2487-2491.
[5]吴春燕．碾压铆接技术[J]．重庆职业技术学院学报，2006，17(2)：147-148．
Wu Chunyan.Rolling Riveting Technology[J]. Journal of Chongqing Vocational & Technical Institute, 2006, 17(2): 147-148.
[6]刘俊，胡远陆．冷碾铆接技术及其应用[J]．汽车与配件，1999，23：14-15．
Liu Jun, Hu Yuanlu. Cold Riveting Technology and Application[J]. Automobile and Parts, 1999, 23: 14-15.
[7]李兵，游国强，龙思远，等．铝合金旋铆连接过程数值模拟分析[J]．特种铸造及有色金属．2010，30(4)：314-317.
Li Bing, You Guoqiang, Long Siyuan，et al．Numerical Simulation of Revolving-riveting Process for Aluminum Alloy[J]. Special Casting & Nonferrous Alloys,2010, 30(4):314-317.
[8]Cho H, Koo J. Orbital Forming Simulation of Automotive Hub Bearing Using the Explicit Finite Element Method[J]. International Journal of Modern Physics B, 2008, 22:1626-1633.
[9]Burkhalter H.巴尔迪克-径向铆接——满足最精确的铆接成形要求[J]．航空制造技术，2005(6)：53-54．
Burkhalter H. Burkhalter-Radial Riveting——Meet the Most Precise Riveting Requirement[J]. Aeronautical Manufacturing Technology, 2005(6): 53-54.
[10]陈伟．挤压成形流动应力和摩擦模型研究[D] ．南昌：华东交通大学，2006.
[11]Wang Guangchun, Guan Jing, Zhao Guoqun. A Photo-plastic Experimental Study on Deformation of Rotary Forging a Ring Workpiece[J]. Journal of Materials Processing Technology，2005, 169(1): 108-114.
|
