游梁式抽油机井皮带滑动效率的仿真研究

中国机械工程 ›› 2013, Vol. 24 ›› Issue (02): 245-251.

游梁式抽油机井皮带滑动效率的仿真研究

邢明明;董世民

燕山大学,秦皇岛,066004

出版日期:2013-01-25 发布日期:2013-02-01
基金资助:
国家自然科学基金资助项目(50974108，51174175)
National Natural Science Foundation of China（No. 50974108，51174175）

#br# Simulation of Sliding Efficiency for Belt Driving in Beam Pumping Units

Xing Mingming;Dong Shimin

Yanshan University,Qinhuangdao,Hebei,066004

Online:2013-01-25 Published:2013-02-01
Supported by:
National Natural Science Foundation of China（No. 50974108，51174175）

摘要/Abstract

摘要：

针对游梁式抽油机皮带传动装置负载扭矩波动大的特点，研究了游梁式抽油机皮带的纵向振动特性、皮带与带轮之间的相对滑动速度以及皮带传动的瞬时滑动效率。将皮带简化为纵向振动的弹性体，建立了皮带在交变摩擦力激励下的纵向振动力学模型与波动方程形式的数学模型;应用振型叠加法建立了皮带纵向振动的数值仿真模型;建立了皮带相对于带轮的瞬时滑动速度、瞬时滑动效率的仿真模型;仿真分析了抽油机曲柄扭矩波动幅值、皮带预紧力对皮带滑动效率的影响。仿真结果表明：抽油机曲柄扭矩波动会降低滑动效率;当抽油机曲柄扭矩存在负扭矩时,皮带滑动效率明显降低;在预紧力能保证皮带传动正常工作的情况下，再增加皮带预紧力会增大皮带的传动效率。



关键词: 游梁式抽油机, 皮带传动装置, 纵向振动, 弹性滑动, 滑动效率, 仿真模型

Abstract:

Considering great fluctuation of load torque of the belt driving
device in a beam pumping unit,belt longitudinal vibration of beam pumping unit,
the relative sliding speed between belt and pulley and instantaneous sliding efficiency
were researched.The belt was simplified to elastic body of longitudinal vibration,
the mechanical model of longitudinal vibration of the belt which was excited by alternating friction was established,and the mathematical model of the wave equation form was
built.The numerical simulation model of wave equation was established with the superposition method of vibration mode.Simulation model of belt instantaneous sliding speed
relative to pulley and simulation model of belt instantaneous sliding efficiency were established.The factors of affecting sliding efficiency were pointed out,such as oscillation amplitude of alternating torque and initial tension of belt in beam pumping unit.The following conclusions are obtained by the simulation results:load torque fluctuations of beam pumping unit will lead to lower sliding efficiency;sliding efficiency of belt driving decreases
obviously
when crank torque of beam pumping units is negative;under condition that the beam pumping unit
operates regularly,the belt efficiency increases with the increasing of initial tension.

Key words: beam pumping unit, belt driving device, longitudinal vibration, elastic slide, sliding efficiency, simulation model

中图分类号:

TE933

邢明明, 董世民. 游梁式抽油机井皮带滑动效率的仿真研究[J]. 中国机械工程, 2013, 24(02): 245-251.

GENG Meng-Meng, DONG Shi-Min. #br# Simulation of Sliding Efficiency for Belt Driving in Beam Pumping Units[J]. China Mechanical Engineering, 2013, 24(02): 245-251.

参考文献

[1]Zhang Shirong,Xia Xiaohua. Optimal Control of Operation Efficiency of Belt Conveyor Systems[J].Applied Energy,2010.1929-1937.
[2]Ravindra V,Padmanabham C,Sujatha C. Static and Free Vibration Studies on a Pulley-belt System with Ground Stiffness[J].Journal of the Brazilian Society of Mechanical and Engineering,2010.61-70.
[3]汪诤[1],吴国祥[1].一种带传动效率的近似计算公式[J].兰州交通大学学报,2009,28(4):118-120.
[4]Lee Tanfeng,Huang A C. Vibration Suppression in Belt-driven Servo Systems Containing Uncertain Nonlinear Dynamics[J].Journal of Sound and Vibration,2011.17-26.
[5]Gauthier J P,Philippe M. A Model Based on Experimental Data for High Speed Steel Belt CVT[J].Mechanism and Machine Theory,2010,(11):1733-1744.
[6]董世民[1],李海琴[1],闫新明[1],张胜利[2].抽油机井系统效率极限值的仿真研究[J].系统仿真学报,2008,20(13):3533-3537. 0
[7]李德双[1],戈新生[1].轴向运动带的横向与纵向振动分析[J].北京机械工业学院学报,2008,23(1):18-22.
[8]夏尊凤[1],陈蕾[1].V带传动中径向和周向弹性滑动及带拉力计算[J].起重运输机械,2008(2):13-15.
[9]王旭东[1],熊平原[1].摩擦带传动弹性滑动的动力学分析与试验[J].机械传动,2010,34(12):52-55.
[10]崔振华;余国安;安锦高.有杆抽油系统[M]北京:石油工业出版社,199434-169.
[11]罗善明;余以道;郭迎福.带传动理论与新型带传动[M]北京:国防工业出版社,2006.
[12]Zhang Shirong,Xia Xiaohua. Modeling and Energy Efficiency Optimization of Belt Conveyors[J].Applied Energy,2011.3061-3071.
[13]Andrianov Igor V,Horssen Wim T.van. On the Transversal Vibrations of a Conveyor Belt:Applicability of Simplified Models[J].Journal of Sound and Vibration,2008.822-829.
[14]王小莉[1],上官文斌[1],花正明[2].单根多楔带传动系统带横向振动的计算方法[J].振动工程学报,2010,23(6):606-615.
[15]董世民[1],冯娜娜[1].抽油机井系统效率的计算机仿真模型[J].系统仿真学报,2007,19(8):1853-1856.
[16]查看详情 [J]. 2010 .
[17]Shirong Zhang Xiaohua Xia . 查看详情 [J]. 2011 .