凸轮轴偏心的测量与修正方法研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (8): 919-922.

凸轮轴偏心的测量与修正方法研究

孔明1;丁力华1,2;赵军1;周广才2

1.中国计量学院,杭州,310018
2.哈尔滨精达测量仪器有限公司,哈尔滨,150000

出版日期:2012-04-25 发布日期:2012-05-10

Research on Measuring and Correcting Method for Camshaft Eccentricity

Kong Ming1;Ding Lihua1,2;Zhao Jun1;Zhou Guangcai2

1.China Jiliang University,Hangzhou,310018
2.Harbin Jingda Measuring Instrument Co.,Ltd.,Harbin,150000

Online:2012-04-25 Published:2012-05-10

摘要/Abstract

摘要：

将实用谐波分析技术应用于凸轮轴两端主轴颈偏心修正中,建立了基于凸轮轴两端主轴颈的各凸轮偏心距和偏心角的计算模型并对其算法进行了分析,通过偏心修正减小了凸轮轴测量基准和设计基准不统一以及凸轮轴自身弯曲带来的系统误差，避免了传统修正偏心算法中的插值误差。搭建了测量凸轮轴的实验平台，对主轴颈和凸轮的实测数据进行了偏心修正。实验结果表明，该方法对主轴径和凸轮偏心量的修正效果明显，提高了仪器的测量精度。


关键词: 凸轮轴, 偏心修正, 测量与修正, 实用谐波分析

Abstract:

A practical harmonic analysis technology and
its application in the correction of main journal eccentricity of camshaft ends was
proposed,a calculation model of camshaft eccentric distance and eccentric angle
was established based on the main journal eccentricity of camshaft ends and the algorithm was analyzed,which would reduce system errors caused by the disunity between measurement datum and design datum of camshaft,and the deflection of the camshaft itself
and avoid interpolation errors of traditional eccentricity correction algorithm.
Experimental platform for measuring camshaft was built,measured data was corrected according to the proposed eccentricity correction
algorithm.Experimental results demonstrate the proposed algorithm can correct
eccentricity of main journal eccentricity of camshaft ends and camshaft itself effectively,
the accuracy of instrument is improved.

Key words: camshaft, eccentricity correction, measurement and correction, practical harmonic analysis

中图分类号:

U464.134

孔明1, 丁力华1, 2, 赵军1, 周广才2. 凸轮轴偏心的测量与修正方法研究[J]. 中国机械工程, 2012, 23(8): 919-922.

KONG Meng-1, DING Li-Hua-1, 2, DIAO Jun-1, ZHOU An-Cai-2. Research on Measuring and Correcting Method for Camshaft Eccentricity[J]. China Mechanical Engineering, 2012, 23(8): 919-922.

参考文献

[1]朱正德[1].非整圆回转零件测量过程中修正偏心影响的研究[J].装备制造技术,2004(3):3-4.
[2]高鹏[1],杨军良[1],尚付鹏[1].凸轮轴测量中统一基准的方法[J].计量技术,2009(7):12-14.
[3]刘兴富[1],李红卫[2].精密凸轮测量的偏心校正方法[J].计量技术,2002(10):30-32.
[4]朱正德.关于凸轮轴测量过程中修正偏心影响的研究[J].组合机床与自动化加工技术,2002(3):20-22.
[5]明友成.全自动凸轮轴测量仪的开发[D].清华大学,2005:
[6]陈为民,陈卫,陈雍乐.相关计算法在凸轮误差测量中的运用[J].仪器仪表学报,2003,24(3):315-317.
[7]Xu Lianhu;Yuan Yibao;Wang Yuhua.Development of Camshaft Journals Multi--parameters Measuring Instrument[A]黑龙江哈尔滨,20101285-1389.
[8]Wigley N M,Jullien G A. On Implementing the A- rithmetic Fourier Transform[J].IEEE Trans Sig- nal Processing,1992,(09):2233-2242.
[9]张宪超,李宁.离散余弦变换的改进的算术傅立叶变换算法[J].电子学报,2000,28(9):88-90.
[10]戴先中[1],唐统一[2].周期信号谐波分析的一种新方法[J].仪器仪表学报,1989,10(3):248-255.
[11]孙运强,宋文爱,任树梅.轴类零件直径、偏心、圆度等的自动测量中的角度空间谐波分析[J].测试技术学报,1996,0(2):592-597.
[12]张明[1],袁道成[1].一种气浮主轴径向回转误差的测量方法[J].制造技术与机床,2008(1):115-117.
[13]蒲竞秋,罗正国.谐波分析技术在回转体测量中的应用[J].仪器仪表学报,2004(z1):117-119.
[14]陈雍升,姜国清,等.实用谐波分析技术在多测头凸轮轴检测系统中的应用[J].机械工人：冷加工,1995(3):4-5.
[15]Zhang Manchao;Yao Zhenqiang;Hu Jun.Offset Algorithm for Non--circular Contour with Point Cloud Data[A]上海,2010150-153.