NURBS曲线泰勒展开插补法的平稳性与改进研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (4): 383-388,434.

NURBS曲线泰勒展开插补法的平稳性与改进研究

罗福源1;游有鹏1;尹涓2

1.南京航空航天大学,南京,210016

2.南京航空航天大学金城学院,南京,211156

出版日期:2012-02-25 发布日期:2012-03-02
基金资助:
国家自然科学基金资助项目(50975144); 南京航空航天大学基本科研业务费资助项目（NJ2010030）
National Natural Science Foundation of China（No. 50975144）

Research on Stability and Improvement of Taylor-Expansion-Based Approach for NURBS Curve Interpolation

Luo Fuyuan1;You Youpeng1;Yin Juan2

1.Nanjing University of Aeronautics and Astronautics,Nanjing,210016

2.Nanhang Jincheng College,Nanjing,211156

Online:2012-02-25 Published:2012-03-02
Supported by:
National Natural Science Foundation of China（No. 50975144）

摘要/Abstract

摘要：

泰勒1阶或2阶级数展开是NURBS曲线迭代插补的常用方法,这种方法会导致弦长误差,从而导致速度波动与运动冲击。为此,分析了泰勒展开插补法的3种误差来源,提出了在1阶泰勒展开法基础上通过界定搜索邻域并采用二分插值搜索方法来精确求取插补点参数的改进方法。该方法充分利用了泰勒展开法的初始精度和NURBS曲线的局部线性特征。试验表明,平均位移相对误差降低至6.46×10-11,且每个插补周期的搜索不多于3次,从而有效抑制了速度波动,实现了高速平稳加工。



关键词:

NURBS曲线, 插补, 泰勒展开, 运动平稳性

Abstract:

The first or the second order Taylor expansion is an usual approach for NURBS curve iterative interpolation.The approach always resulted in chord errors and consequent feedrate fluctuation and motion impact.Therefore,after analyzing the three reasons that cause Taylor-expansion-based interpolation errors,an improved approach was proposed to deriving accurate interpolation points by means of search neighborhood determination and binary interpolation search based on the first Taylor expansion.The proposed approach made full use of both origin accuracy of the first Taylor expansion and the local linear characteristics of NURBS curve.The interpolation test shows the average relative displacement error is decreased to 6.46×10-11.Moreover,the search times are no more than three in every interpolation period.Thus,feedrate fluctuation is greatly suppressed and high speed and high stability machining is realized.

Key words: NURBS curve, interpolation, Taylor expansion, motion stability

中图分类号:

TP273

罗福源1, 游有鹏1, 尹涓2.

NURBS曲线泰勒展开插补法的平稳性与改进研究

[J]. 中国机械工程, 2012, 23(4): 383-388,434.

LUO Fu-Yuan-1, LIU Wei-Feng-1, YIN Juan-2.

Research on Stability and Improvement of Taylor-Expansion-Based Approach for NURBS Curve Interpolation

[J]. China Mechanical Engineering, 2012, 23(4): 383-388,434.

参考文献

[1]李杰[1,2,3],马跃[2].数控系统中的NURBS曲线插补技术[J].微计算机信息,2007(19):210-212.
[2]Yang D C H, Kong T. Parametric Interpolator Ver sus Linear Interpolator for Precision CNC Machi ning[J]. Computer-- Aided Design, 1994,26 (3) 225-233.
[3]康书杰.NURBS曲线实时插补技术研究[D].南京航空航天大学,2007:
[4]Farouki R T,Tsai Y F. Exact Taylor Series Coefficients for Variable-- feedrate CNC Curve Interpolators[J]. Computer-- Aided Design, 2001,33 (2) : 155-165.
[5]刘宇[1],戴丽[1],刘杰[1],王健[1].泰勒展开NURBS曲线插补算法[J].东北大学学报：自然科学版,2009,30(1):117-120.
[6]游有鹏,王珉.参数曲线的自适应插补算法[J].南京航空航天大学学报,2000,32(6):667-671.
[7]张志强.数控系统参数曲线、曲面插补算法及加减速控制研究 [D].天津大学,2007:
[8]王海涛[1],赵东标[1],高素美[2].NURBS曲线实时插补中S型加减速算法的研究[J].山东大学学报：工学版,2010,40(1):63-67.
[9]中国金属加工在线.纳米插补与复合化功能将成为未来国产数控系统的必备功能[EB/0L].(2011-05-26).http://www.mwl950.com/201I/05/6665974185.shtml.
[10]施法中.计算机辅助几何设计与非均匀有理B样条[M].北京：高等教育出版社,2001.
[11]Yeh S S, Hsu P L. The Speed--controlled Interpo- lator for Machining Parametric Curves[J]. Com- puter-Aided Design, 1999,31 (5) :349-357.
[12]王田苗[1],曹宇男[1],陈友东[1],魏洪兴[1].基于deBoor算法的NURBS曲线插补和自适应速度控制研究[J].中国机械工程,2007,18(21):2608-2613.
[13]张海涛[1],蔡安江[1].NURBS曲线插补的运动规划与自适应速度插补[J].组合机床与自动化加工技术,2009(10):66-70.
[14]潘海鸿[1],杨微[1],陈琳[1],谭华卿[1],孙红涛[1].全程S曲线加减速控制的自适应分段NURBS曲线插补算法[J].中国机械工程,2010(2):190-195.
[15]Tsai M S,Nien H W,Yau H T. Development of an Integrated Look--ahead Dynamics--based NURBS Interpolator for High Precision Machinery [J].Computer--Aided Design,2008,40(5) :554-566.