越野汽车新型变速比差速器的研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (23): 2844-2847.

越野汽车新型变速比差速器的研究

贾巨民;高波;索文莉;孙爱丽

军事交通学院,天津,300161

出版日期:2012-12-10 发布日期:2012-12-21
基金资助:
国家自然科学基金资助项目(50875260)
National Natural Science Foundation of China（No. 50875260）

Study on a New Type of Differential with Variable Ratio for Off-road Vehicles

Jia Jumin;Gao Bo;Suo Wenli;Sun Aili

University of Military Transportation, Tianjin, 300161

Online:2012-12-10 Published:2012-12-21
Supported by:
National Natural Science Foundation of China（No. 50875260）

摘要/Abstract

摘要：

提出了一种新型变速比差速器,行星齿轮与半轴齿轮齿数之比为1∶2,传动比以行星齿轮转一圈为一个变化周期,突破了齿数与周节的限制,可以最大限度地提高传动比的变化幅值(达到±40%),增大差速器的锁紧系数。给出了该差速器锥齿轮的设计原理与方法,包括非圆节锥与节曲线设计、球面-平面映射、齿形设计等,并进行了实例验证。试验结果表明,新型差速器达到了设计预期,理论和实际锁紧系数分别为2.33和3.15,可以显著提高车辆的越野通过性。

关键词: 差速器, 变速比, 非圆锥齿轮, 越野汽车

Abstract:

A new type of differential with variable ratio for off-road vehicles was put forward, in which the transmission ratio varied at a circle of the planetary gear, which had half the number of the teeth of the half-axle gear. The variable range of ratio can go extreme as much as ±40%, resulting in locking coefficients of 2.33(theoretical) and 3.15(practical), which would be of great help to improve the passing capability of the vehicle. Based on the round trip mapping algorithm with preserved geodesic curvature between a sphere and a plane, the design methods of the pitch curves as well as the tooth profiles were presented, and an actual case study was illustrated to show the effectiveness of the new differential. 

Key words: differential, variable ratio, non-circular bevel gear, off-road vehicle

中图分类号:

TH132

贾巨民, 高波, 索文莉, 孙爱丽. 越野汽车新型变速比差速器的研究[J]. 中国机械工程, 2012, 23(23): 2844-2847.

GU Ju-Min, GAO Bei, SUO Wen-Chi, SUN Ai-Li. Study on a New Type of Differential with Variable Ratio for Off-road Vehicles[J]. China Mechanical Engineering, 2012, 23(23): 2844-2847.

[1]	苏睿, 芮晓明, 武鑫. 一种新型自稳速机构的概念设计与仿真[J]. 中国机械工程, 2015, 26(8): 1058-1061.
[2]	刘大伟, 任廷志, 金昕, 马强. 减变速一体化滚动活齿机构的设计理论[J]. 中国机械工程, 2015, 26(24): 3318-3322,3335.
[3]	吕刚, 范守文, 李光辉, 童水光, 肖人源. 新型高阶非圆锥齿轮的设计及其节面修形方法研究[J]. 中国机械工程, 2015, 26(22): 2989-2995.
[4]	林超1, 龚海1, 侯玉杰1, 2, 聂玲1. 高阶椭圆锥齿轮齿形设计与加工 [J]. 中国机械工程, 2012, 23(3): 253-258.
[5]	贾巨民, 高波. 越野汽车双联非圆行星齿轮差速器的研究 [J]. 中国机械工程, 2012, 23(3): 346-348.
[6]	吴跃成, 季小伟, 谢, 佩, 傅丽贤. 基于主动限滑差速器的ZL50装载机四轮驱动仿真分析 [J]. 中国机械工程, 2011, 22(21): 2638-2641.
[7]	林超, 侯玉杰, 冉小虎, 丘华. 卵形非圆锥齿轮传动特性研究 [J]. 中国机械工程, 2010, 21(14): 1722-1725,1731.
[8]	贾巨民;高波;. 越野汽车分动器非圆行星差速器概念模型[J]. J4, 2008, 19(24): 0-2907.
[9]	赵玉民;马延会;华林;刘进;. 非圆锥齿轮节曲线的平面展开算法研究[J]. J4, 2008, 19(17): 0-2089.