基于实例推理的船用绞缆机设计方法的研究

中国机械工程 ›› 2012, Vol. 23 ›› Issue (20): 2459-2465.

基于实例推理的船用绞缆机设计方法的研究

陈清林1;林少芬1;张军2

1.集美大学,厦门,361021
2.泉州市佰源船舶机械有限公司,泉州,362141

出版日期:2012-10-25 发布日期:2012-11-01
基金资助:
福建省科技重大专项(2008HZ0002-1);科技部重大专项(2009GJC40033);李尚大集美大学科研基金资助项目（ZC2011007）
Fujian Provincial Science and Technology Major Project ( No. 2008HZ0002-1);
Major Program of Ministry of Science and Technology of China（No. 2009GJC40033）

Design Method of Marine Cable Twisting Machine Based on Case-based Reasoning

Chen Qinglin1;Lin Shaofen1;Zhang Jun2

1.Jimei University,Xiamen,Fujian,361021
2.Quanzhou Baiyuan Shipping Machinery Co., Ltd.,Quanzhou,Fujian,362141

Online:2012-10-25 Published:2012-11-01
Supported by:

Fujian Provincial Science and Technology Major Project ( No. 2008HZ0002-1);
Major Program of Ministry of Science and Technology of China（No. 2009GJC40033）

摘要/Abstract

摘要：

结合实例推理的设计原理，在绞缆机设计中对特征参数和参数之间的关联度进行分析，从而建立绞缆机的设计实例库。设计了合理的相似度算法对设计过程的各个特征参数及其关联度进行检索。通过对检索得到的实例进行适当的修改解决目前的新设计任务，加速整个设计过程。在绞缆机是否符合相关性能的分析中，应用动力学分析软件检索得到绞缆机三维实体模型，并对模型中各个部件添加约束，建立相应模型的虚拟样机，进行不同缆绳速度对轴载荷影响的计算。结合模拟张力数据，对恒张力控制过程进行仿真计算，得出相应所需变频器的控制精度。对卷筒进行了有限元分析，在额定载荷下计算出最大应力以校核强度。



关键词: 实例推理, 绞缆机, 恒张力控制, 有限元分析

Abstract:

Based on the principles of CBR,the characteristic parameters and their degree of association of a cable twisting machine were analyzed and calculated to set up the case library.The designed reasoning algorithm can retrieve each characteristic parameters and their correlation degrees in the design process.CBR was an artificial intelligence methodology that used past design solutions and adapted them to solve current problems,allowing reuse and modification of previously successful designs to accelerate the design process.The prototype of cable twisting machine was established by adding constraints with dynamics software to the 3D model.The load of axle was calculated with different cable velocities,and the control precision of the converter was figured out when simulation computation on the constant tension control was processed with the test data of tension.In addition,FEA of the reel was carried out in order to check the structure strength. 

Key words: case-based reasoning(CBR), cable twisting machine, constant tension control, FEA

中图分类号:

U661.43

陈清林1, 林少芬1, 张军2. 基于实例推理的船用绞缆机设计方法的研究[J]. 中国机械工程, 2012, 23(20): 2459-2465.

CHEN Qing-Lin-1, LIN Shao-Fen-1, ZHANG Jun-2. Design Method of Marine Cable Twisting Machine Based on Case-based Reasoning[J]. China Mechanical Engineering, 2012, 23(20): 2459-2465.

参考文献

[1]Hayes C C,Goel A K,Tumer I Y,et al. Intelligent Support for Product Design: Looking Backward, Looking Forward[J].Journal of Computing and In- formation Science in Engineering, 2011,11 (2) : 1-9.
[2]刘志杰[1,2],史彦军[1],滕弘飞[1].基于实例推理的全断面岩石隧道掘进机刀盘主参数设计方法[J].机械工程学报,2010(3):158-164.
[3]袁建新[1],朱敬超[1],康连吕[2].基于CBR的模具数字化设计方法研究[J].机械设计与制造,2009(6):239-240.
[4]于芳芳[1],黄翔[1],廖文和[1].实例推理在冲模设计中的应用[J].机械制造与自动化,2005,34(1):11-13.
[5]孙毅[1],单继宏[1],孙中炜[1],毛亚郎[1].基于实例与规则集成的模架配置方法[J].中国机械工程,2009,10(4):428-432.
[6]童福安[1],郭钢[1],徐淑梅[2],王驰[1],杨丙辉[1],郭卫光[1].基于CBR的产品实例快速设计系统研究[J].机械,2008,35(2):4-5.
[7]徐燕申,徐千理,侯亮.基于CBR的机械产品模块化设计方法的研究[J].机械科学与技术,2002,21(5):833-835. 7
[8]张晓丽[1],李鑫[1],郭智春[1],胡东明[1].基于CBR的机械产品智能设计方法研究[J].大连理工大学学报,2008,48(6):835-840.
[9]高常青[1],黄克正[2],赵方[1],艾长胜[1],曹树坤[1].基于实例推理的原理及结构快速创新设计的研究与实现[J].中国机械工程,2007,18(24):2907-2913.
[10]Kolodner J. Case-based Reasoning[M]. San Fran- cisco ,CA:Morgan Kauffman Publishers, 1993.
[11]Cobb C L, Agogino A M. Case--based Reasoning for Evolutionary MEMS Design [J]. Journal of Computing and Information Science in Engineer- ing, 2010,10(3) : 1-10.
[12]Boyle I M, Rong K, Brown D C. CAFixD: A Case-- based Reasoning Fixture Design Method Frame- work and Indexing Mechanisms[J]. ASME Journal of Computing and Information Science in Engineer- ing,2006,6(1) :40-48.
[13]Tot S B, Britton G A, Zhang W Y. Indexing and Retrieval in Metal Stamping Die Design Using Case--based Reasoning [J]. ASME Journal of Computing and Information Science in Engineer- ing, 2003,3 (4) : 353-362.
[14]Watson I, Marir F. Case-- based Reasoning: A Re- view[J]. The Knowledge Engineering Review, 1994,9 (4) : 327-354.
[15]Maher M L,Gomez A. Case--based Reasoning in Design[J]. IEEE Expert, 1997,12(2) : 34-41.
[16]向溢,杨建民,谭家华,张承懿.码头系泊船舶模型试验[J].海洋工程,2001,19(2):45-49.
[17]胡甫才[1],周勇[1],向阳[1],杨建国[1].锚绞机滚筒的有限元分析和试验研究[J].船舶工程,2007,29(4):9-12.