基于可靠性仿真面向维护的刮板输送机链条优化设计

中国机械工程 ›› 2012, Vol. 23 ›› Issue (18): 2218-2223.

基于可靠性仿真面向维护的刮板输送机链条优化设计

傅国红1;黄良沛2;岳文辉2

1.湖南科技大学先进矿山装备教育部工程研究中心,湘潭,411201
2.湖南科技大学机械设备健康维护湖南省重点实验室,湘潭,411201

出版日期:2012-09-25 发布日期:2012-09-29
基金资助:
国家自然科学基金资助项目（50875082,51074074);湖南省高校科技创新团队支持计划资助项目
National Natural Science Foundation of China（No. 50875082,51074074）

Optimization Design of Scraper Conveyor Chain for Maintenance Based on Reliability Simulation

Fu Guohong1;Huang Liangpei2;Yue Wenhui2

1.Engineering Research Center for Advanced Mining Equipment of the Ministry of Education,Hunan University of Science & Technology,Xiangtan,Hunan,411201
2.Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment,Hunan University of Science & Technology,Xiangtan,Hunan,411201

Online:2012-09-25 Published:2012-09-29
Supported by:
National Natural Science Foundation of China（No. 50875082,51074074）

摘要/Abstract

摘要：

基于刮板圆环链的失效时间分布函数,重构了面向维护的刮板链可靠性模型，对刮板链服役运行过程中的可靠性变化进行仿真分析;建立了综合考虑系统维护周期、全寿命周期成本和系统可靠度的刮板链优化设计模型，提出了基于可靠性仿真的刮板链优化设计方法。仿真结果表明,该设计方法可以优选系统的刮板链设计方案，合理选择圆环链的配置，优化系统的维护周期。



关键词: 刮板链, 维护, 可靠性仿真, 全寿命周期成本, 优化设计

Abstract:

Based on the time-to-failure density function of ring chains,a scraper chain reliability model for maintenance was reconstructed and the change course of the scraper chain reliability was analyzed by means of reliability model simulation.Then considering maintenance period,maintenance cost,system reliability,
the scraper chain optimal design models were established,and the reliability-based optimization methods for scraper chain systems were developed.Finally,simulation results show that this design method can help to select the design scheme of scraper chains preferably,to decide a reasonable configuration for ring chains,and to optimize maintenance cycle of scraper chain systems.

Key words: scraper chain, maintenance, reliability simulation, total life cycle cost, optimization design

中图分类号:

TH227

傅国红1, 黄良沛2, 岳文辉2. 基于可靠性仿真面向维护的刮板输送机链条优化设计[J]. 中国机械工程, 2012, 23(18): 2218-2223.

FU Guo-Gong-1, HUANG Liang-Pei-2, YUE Wen-Hui-2. Optimization Design of Scraper Conveyor Chain for Maintenance Based on Reliability Simulation[J]. China Mechanical Engineering, 2012, 23(18): 2218-2223.

参考文献

[1]封士彩,肖兴明.刮板输送机焊接圆环链断裂分析及预防[J].煤矿机械,1999(10):33-34.
[2]孙福群[1].刮板输送机断链故障分析[J].陕西煤炭,2004(4):24-25.
[3]刘宝友[1],方攸同[2],魏金祥[3],王永亮[1].状态维修机械设备的可靠性和检测更换策略[J].机械工程学报,2006,42(3):30-35.
[4]张宏[1],王健[1],文福拴[1,2],钟志勇[2],黄杰波[2].兼顾可靠性和经济性的电力设备最优状态维修策略[J].电力科学与工程,2006(2):8-13.
[5]Wang H, Pham H. Some Maintenance Models and Availability with Imperfect Maintenance in Produc tion Systems [J]. Annals of Operations Research, 1999,91 (3) :05-318.
[6]何庆[1].预防维修周期的数学模型[J].农业机械学报,2005,36(2):153-154.
[7]Dipak C, Othman M. Optimal Inspection and Re placement Models for Systems with Increasing Min imal Repair Cost[J]. International Journal of Relia bility,Quality and Safety Engineering, 1999,6 (2): 155-171.
[8]Kim G, Park S H,Lee H M, et al. RCM System Modeling in Developing an Advanced Urban EMU [C]//International Conference on Railway Engi- neering- Challenges for Railway Transportation in Information Age, ICRE 2008. Hong Kong, 2008: 1-5.
[9]Bai Yongsheng,Jia Xisheng, Li Feng. Cost Model Based Optimization of RCM Group Maintenance In- terval[C]//16th International Conference on Indus-- trial Engineering and Engineering Management. Bei- jing, 2009 : 1174-1178.
[10]Fischer K, Besnard F, Bertling L. Reliability-- cen- tered Maintenance for Wind Turbines Based on Statistical Analysis and Practical Experience[J]. IEEE Transactions on Energy Conversion,2012,27 (1) :184-195.
[11]Welp E G,Lindemann U.吕新生,译.面向回收利用和面向维护设计中的辅助手段[J].工程设计,2002,9(2):77-88.
[12]周红,甘茂治,刘安清,刘继民.基于并行工程的产品维修性设计[J].机械设计,2003,20(9):3-5.
[13]陈文.面向维修的飞机设计原则[J].航空工程与维修,2001(6):2-2.
[14]Shu L H,Flower W C. Reliability Modeling in De- sign for Remanufacture[J]. ASME Journal of Me- chanical Design, 1998,120 (12) : 620-627.
[15]黄良沛[1],刘德顺[1],岳文辉[1],尹喜云[1].面向重组维修的机械系统可靠性建模与仿真[J].机械工程学报,2008,44(6):224-230.
[16]岳文辉[1],刘德顺[1],黄良沛[1].面向维护的矿山机电系统服役年龄动态仿真与近似建模[J].煤炭学报,2007,32(7):773-777.
[17]孙有朝,左洪福,王伟.民航发动机维修成本定量评估方法研究[J].应用科学学报,2003,21(4):401-405.
[18]Slom T W. Safety--cost Trade--offs in Medical Device Reuse: a Markov Decision Process Model [J]. Health Care Manage Sci. ,2007,10:81-93.