基于灰色关联分析的平面磨削工艺参数优化

中国机械工程 ›› 2011, Vol. 22 ›› Issue (6): 631-635.

基于灰色关联分析的平面磨削工艺参数优化

李郝林;王健

上海理工大学，上海，200090

出版日期:2011-03-25 发布日期:2011-04-15
基金资助:
国家重大科技专项(2011ZX04004-051)；上海市科学技术委员会资助项目(08110511600)
National Science and Technology Major Project ( No. 2011ZX04004-051)

Determination of Optimum Parameters in Plane Grinding by Using Grey Relational Analysis

Li Haolin;Wang Jian

University of Shanghai for Science and Technology,Shanghai,200090

Online:2011-03-25 Published:2011-04-15
Supported by:
National Science and Technology Major Project ( No. 2011ZX04004-051)

摘要/Abstract

摘要：

通过分析表面粗糙度和平面度，运用灰色关联分析方法来优化平面磨削中的工艺参数(砂轮转速、进给方式、进给速度、磨削深度、磨削液浓度和磨削时间等)。在实验中，使用正交排列来设计实验，通过计算得到灰色关联度，从而决定最优的工艺参数。实验结果表明，通过该方法可有效地减小平面磨削中的表面粗糙度和平面度。

关键词:

表面粗糙度, 平面度, 平面磨削, 灰色关联分析, 优化

Abstract:

The grey relational analysis was used for optimizing the plane grinding process parameters for the work piece surface roughness and the flatness. Various grinding parameters, such as grinding wheel speed, mode of feeding, feeding speed, grinding depth, grinding concentration and grinding time were considered. An orthogonal array was used for the experimental design. Optimal machining parameters were determined by the grey relational grade obtained from the grey relational analysis for multi-performance characteristics (the surface roughness and the flatness). Experimental results show that the surface roughness and the flatness in plane grinding process can be improved effectively through the new approach.

Key words: surface roughness, flatness, plane grinding, grey relational analysis, optimization

中图分类号:

TH162

李郝林, 王健.

基于灰色关联分析的平面磨削工艺参数优化

[J]. 中国机械工程, 2011, 22(6): 631-635.

LI Hao-Lin, WANG Jian.

Determination of Optimum Parameters in Plane Grinding by Using Grey Relational Analysis

[J]. China Mechanical Engineering, 2011, 22(6): 631-635.

参考文献

[1]王剑彬[1],王勤思[1].磨削加工中磨削参数的模糊优化设计[J].南华大学学报：自然科学版,2005,19(1):29-31.
[2]刘思峰等著.灰色系统理论及其应用[M],2004:376.
[3]N. Tosun,L. Ozler.Optimisation for hot turning operations with multiple performance characteristics[J]. The International Journal of Advanced Manufacturing Technology . 2004 (11-12)
[4]N. Tosun,H. Pihtili.The Effect of Cutting Parameters on Wire Crater Sizes in Wire EDM[J]. International Journal of Advanced Manufacturing Technology . 2003 (10-11)
[5]C.-Y. Ho,Z.-C. Lin.Analysis and Application of Grey Relation and ANOVA in Chemical–Mechanical Polishing Process Parameters[J]. International Journal of Advanced Manufacturing Technology . 2003 (1)
[6]S.-P. Lo.The Application of an ANFIS and Grey System Method in Turning Tool-Failure Detection[J]. International Journal of Advanced Manufacturing Technology . 2002 (8)
[7]C.C.L. Wang,S.-F. Chen,M.M.F. Yuen.Fuzzy Part Family Formation Based on Grey Relational Analysis[J]. International Journal of Advanced Manufacturing Technology . 2001 (2)
[8]Fung,C-P.Manufacturing process optimization for wear property of fiber-reinforced polybutylene terephthalate composites with grey relational analysis. Wear . 2003
[9]Taylor FW.On the art of cutting metals. Transactions of the American Society of Mechanical Engineers . 1907
[10]Lyu MR.Handbook of software reliability engineering. . 1996
[11]A. Bhattacharyya,R. Faria-Gonzalez,I. Ham.Regression analysis for predicting surface finish and its application in the determination of optimum machining conditions. ASME Journal of Engineering for Industry . 1970
[12]Erner,DS.Optimization of the constrained machining economics problem by geometric programming. ASME Journal of Engineering for Industry . 1971
[13]Deng Julong.Introduction to grey system theory. The Journal of Grey System . 1989

[1]	王国彪, 赖一楠, 范大鹏, 杨华勇, 王时龙. 新型精密传动机构设计与制造综述 [J]. J4, 201016, 21(16): 1891-1897.
[2]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[3]	李小力, 陈威, 闫蓉. 基于BP神经网络的空间轮廓误差自适应补偿 [J]. J4, 201016, 21(16): 1902-1906.
[4]	夏瑞雪, 卢荣胜, 刘宁, 董敬涛. 基于圆点阵列靶标的特征点坐标自动提取方法 [J]. J4, 201016, 21(16): 1906-1910.
[5]	陈立锋, 吴晓铃, 秦大同, 肖正明. 齿轮啮合过程摩擦功耗研究 [J]. J4, 201016, 21(16): 1911-1915.
[6]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[7]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[8]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[9]	张敏杰, 王庆九, 管成. 并联式油液混合动力挖掘机动力系统仿真研究 [J]. J4, 201016, 21(16): 1932-1936.
[10]	刘安平, 刘济春. IPC-208B型原子力显微镜大范围扫描三维驱动系统研究 [J]. J4, 201016, 21(16): 1936-1940.
[11]	姚运萍, 王智渊. 螺栓连接受载能量损失与结合面参数识别 [J]. J4, 201016, 21(16): 1941-1943,1951.
[12]	陈建, 邓利娟. 恒力弹性机构的设计 [J]. J4, 201016, 21(16): 1944-1946.
[13]	罗洁思, 于德介, 史美丽. 基于SVD和线调频小波路径追踪的转速波动齿轮箱故障诊断 [J]. J4, 201016, 21(16): 1947-1951.
[14]	战晓磊, 辛洪兵, 汉斯·彼德　兰特斯. 基于虚拟现实的MOTOMAN-HP3型机器人运动学仿真 [J]. J4, 201016, 21(16): 1952-1954,1998.
[15]	苏厚军, 史铁林, 陈非. 高炉煤气透平机状态检修的设计与实施 [J]. J4, 201016, 21(16): 1955-1958.