管板单面电阻点焊弹塑性变形分解

中国机械工程 ›› 2011, Vol. 22 ›› Issue (5): 608-610.

管板单面电阻点焊弹塑性变形分解

杨洪刚

上海电机学院,上海,200245

出版日期:2011-03-10 发布日期:2011-03-24
基金资助:
上海电机学院科研启动经费资助项目(10C417)

Decomposition of Elastic and Plastic Deformation of Sheet to Tube Single-sided Resistance Spot Welding

Yang Honggang

Shanghai Dianji University,Shanghai,200245

Online:2011-03-10 Published:2011-03-24

摘要/Abstract

摘要：

结合伺服焊枪的焊点压痕在线提取功能,试验研究了管板单面点焊过程中的焊接变形,实现了弹塑性变形的分解。结果表明,弹性变形和塑性变形均随着焊接电流的递增而线性增加,相同焊接条件下,随着管材半径的减小,弹性变形逐渐减小,塑性变形逐渐增大,加大了焊接裂纹出现的趋势。研究结果可为管板单面点焊焊接变形和裂纹的监控提供参考。

关键词:

管板单面点焊, 伺服焊枪, 焊接变形, 焊接裂纹

Abstract:

Combined with the function of weld indentation extraction of servo gun, the welding deformation of sheet to tube single-sided spot welding was studied by experiments,and decomposition of elastic and plastic deformation was realized. Research results show that elastic and plastic deformation will increase linearly with welding current. Under the same welding conditions, when the tube radius is decreased, elastic deformation gets smaller, and plastic deformation is increased, which make welding cracks easily occur. Research results can provide guidance for control of the welding deformation and crack of sheet to tube single-sided spot welding.

Key words:

sheet to tube single-sided spot welding, servo gun, welding deformation, welding crack

中图分类号:

TG404



杨洪刚.

管板单面电阻点焊弹塑性变形分解

[J]. 中国机械工程, 2011, 22(5): 608-610.

YANG Hong-Gang. Decomposition of Elastic and Plastic Deformation of Sheet to Tube Single-sided Resistance Spot Welding[J]. China Mechanical Engineering, 2011, 22(5): 608-610.

[1]	王国彪, 赖一楠, 范大鹏, 杨华勇, 王时龙. 新型精密传动机构设计与制造综述 [J]. J4, 201016, 21(16): 1891-1897.
[2]	王立存, 陈进, 张贤明, 陈国强. 基于泛函的制冷涡旋压缩机变壁厚涡旋型线理论及形状优化 [J]. J4, 201016, 21(16): 1898-1901.
[3]	李小力, 陈威, 闫蓉. 基于BP神经网络的空间轮廓误差自适应补偿 [J]. J4, 201016, 21(16): 1902-1906.
[4]	夏瑞雪, 卢荣胜, 刘宁, 董敬涛. 基于圆点阵列靶标的特征点坐标自动提取方法 [J]. J4, 201016, 21(16): 1906-1910.
[5]	陈立锋, 吴晓铃, 秦大同, 肖正明. 齿轮啮合过程摩擦功耗研究 [J]. J4, 201016, 21(16): 1911-1915.
[6]	李明磊, 贾育秦, 张学良, 刘丽琴, 杜娟, 温淑花, 兰国生. 基于多目标差异演化算法的并联机构结构优化 [J]. J4, 201016, 21(16): 1915-1920.
[7]	吴怀超, 吴白羽, 张秀华. 石蜡感温阀传热性能的数字仿真研究 [J]. J4, 201016, 21(16): 1921-1926.
[8]	鲁开讲, 师俊平, 张锋涛. 平面三自由度并联机构动力学优化设计 [J]. J4, 201016, 21(16): 1926-1931.
[9]	张敏杰, 王庆九, 管成. 并联式油液混合动力挖掘机动力系统仿真研究 [J]. J4, 201016, 21(16): 1932-1936.
[10]	刘安平, 刘济春. IPC-208B型原子力显微镜大范围扫描三维驱动系统研究 [J]. J4, 201016, 21(16): 1936-1940.
[11]	姚运萍, 王智渊. 螺栓连接受载能量损失与结合面参数识别 [J]. J4, 201016, 21(16): 1941-1943,1951.
[12]	陈建, 邓利娟. 恒力弹性机构的设计 [J]. J4, 201016, 21(16): 1944-1946.
[13]	罗洁思, 于德介, 史美丽. 基于SVD和线调频小波路径追踪的转速波动齿轮箱故障诊断 [J]. J4, 201016, 21(16): 1947-1951.
[14]	战晓磊, 辛洪兵, 汉斯·彼德　兰特斯. 基于虚拟现实的MOTOMAN-HP3型机器人运动学仿真 [J]. J4, 201016, 21(16): 1952-1954,1998.
[15]	苏厚军, 史铁林, 陈非. 高炉煤气透平机状态检修的设计与实施 [J]. J4, 201016, 21(16): 1955-1958.