QFD与正交试验混合方法在大批量定制中的应用研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (5): 576-579.

QFD与正交试验混合方法在大批量定制中的应用研究

吴新丽1;李仁旺1;张思荣2;徐兴1,3;罗昊1

1.浙江理工大学,杭州,310018

2. 浙江中烟工业有限责任公司,杭州,310008

3.浙江科技学院,杭州,310023

出版日期:2011-03-10 发布日期:2011-03-24
基金资助:
浙江省杰出青年团队项目(R6080403)；浙江省自然科学基金重点资助项目(Z6090572)；教育部人文社会科学研究项目(06JD630006)；国家自然科学基金资助项目(50976107，50675208，50805133)；浙江省自然科学基金资助项目(Y6090718)；浙江省科技计划资助项目(2010C31052)
Zhejiang Provincial Team Program for Distinguished Young Scholars(No. R6080403);

Key Program of Zhejiang Provincial Natural Science Foundation of China（No. Z6090572）;

National Natural Science Foundation of China（No. 50976107，50675208，50805133）;

Zhejiang Provincial Natural Science Foundation of China（No. Y6090718）;
Zhejiang Provincial Science and Technology Program ( No. 2010C31052)

Research on Application of a Hybrid Method of QFD and Orthogonal Experimental Method in Mass Customization

Wu Xinli1;Li Renwang1;Zhang Sirong2;Xu Xing1,3;Luo Hao1

1.Zhejiang Sci-Tech University, Hangzhou, 310018

2.China Tobacco Zhejiang Industrial Co.,Ltd., Hangzhou, 310008

3.Zhejiang University of Science and Technology,Hangzhou,310023

Online:2011-03-10 Published:2011-03-24
Supported by:

Zhejiang Provincial Team Program for Distinguished Young Scholars(No. R6080403);

Key Program of Zhejiang Provincial Natural Science Foundation of China（No. Z6090572）;

National Natural Science Foundation of China（No. 50976107，50675208，50805133）;

Zhejiang Provincial Natural Science Foundation of China（No. Y6090718）;
Zhejiang Provincial Science and Technology Program ( No. 2010C31052)

摘要/Abstract

摘要：

提出了一种将QFD与正交试验设计相结合的新型混合方法,并将该方法用于大批量定制的产品设计过程,目的是将大批量定制产品的顾客个性化需求更准确地转化为产品的设计参数。首先将系列产品根据设计进程划分出定制零部件族,从中选取受顾客需求影响较大的敏感零部件进行QFD分析设计,然后利用正交试验设计中的信噪比分析确定QFD中的关联关系,得到与某项顾客需求所对应的工程技术特性的参数组合,使得设计的产品具有令顾客满意的稳健性能。最后以某客车公司的车门开发设计为实例进行了详细阐述。



关键词:

大批量定制, 质量功能配置, 正交试验设计;质量屋

Abstract:

A new hybrid method of QFD and orthogonal experimental design for the design process of mass customization product was proposed herein, the purpose was to change the customers’ individual needs into design parameters accurately. First, the customization parts division was made according to the design process, selecting the sensitive parts which were affected by customers greatly, using the QFD method to analysis and design, then using the signal and noise analysis among the orthogonal design method to determine the associated relationship during the QFD analysis, the engineering technology parameter group was obtained,which corresponded with the customer requirements. Finally,the designed products with customer satisfaction and robust performance were made. And one bus company’s door design was taken as an example to explain in detail.

Key words:

mass customization, quality function deployment(QFD), orthogonal experimental design, house of quality(HOQ)

中图分类号:

F279.23

吴新丽, 李仁旺, 张思荣, 徐兴, 罗昊.

QFD与正交试验混合方法在大批量定制中的应用研究

[J]. 中国机械工程, 2011, 22(5): 576-579.

TUN Xin-Li, LI Ren-Wang, ZHANG Sai-Rong, XU Xin, LUO Hao.

Research on Application of a Hybrid Method of QFD and Orthogonal Experimental Method in Mass Customization

[J]. China Mechanical Engineering, 2011, 22(5): 576-579.

[1]	王黎明1,2;李龙1,2;付岩1,2;李方义1,2;彭鑫1,2;王耿1,2. 基于绿色特征及质量功能配置技术的机电产品绿色性能优化[J]. 中国机械工程, 2019, 30(19): 2349-2355.
[2]	郭茜, 王增强, 蒲云. 基于质量屋与排序组织法的产品概念决策方法[J]. 中国机械工程, 2014, 25(18): 2496-2500.
[3]	高洋, 刘志峰, 胡迪, 张雷. 面向绿色设计的客户需求工程参数转化方法 [J]. 中国机械工程, 2011, 22(5): 580-587.
[4]	李柏姝, 雒兴刚, 唐加福. 基于价值分析的产品属性权重的确定方法 [J]. 中国机械工程, 2011, 22(3): 331-334.
[5]	单汨源1, 王克喜1, 2, 袁际军3. 无公用平台下的参数化产品族多目标智能优化 [J]. 中国机械工程, 2011, 22(20): 2428-2436.
[6]	郭茜1, 李延来1, 蒲云1, 雒兴刚2. 产品规划中基于不完全语义信息的顾客需求分析研究 [J]. 中国机械工程, 2011, 22(20): 2485-2489,2519.
[7]	李延来1, 雒兴刚1, 韩毅2, 姚建明3. 产品规划中基于市场竞争的关联关系强度估计 [J]. 中国机械工程, 2011, 22(13): 1564-1570.
[8]	李延来;雒兴刚;姚建明;焦明海;. 基于竞争性评价的质量屋中工程特性最终重要度的确定方法[J]. J4, 2009, 20(19): 0-2392.