基于I-DEAS的汽轮发电机定子绕组自动三维建模

中国机械工程 ›› 2011, Vol. 22 ›› Issue (3): 317-321.

基于I-DEAS的汽轮发电机定子绕组自动三维建模

刘晓芳1;杨世彦1;刘大鹏2;陈景易2

1.哈尔滨工业大学，哈尔滨，150001

2.哈尔滨电机厂有限责任公司，哈尔滨，150001

出版日期:2011-02-10 发布日期:2011-03-02
基金资助:
国家自然科学基金资助项目(51077020)
National Natural Science Foundation of China（No. 51077020）

3D Automatic Modeling System of Turbogenerator Stator Coil Based on I-DEAS

Liu Xiaofang1;Yang Shiyan1;Liu Dapeng2;Chen Jingyi2

1.Harbin Institute of Technology, Harbin, 150001

2.Harbin Electric Machinery Company Limited, Harbin, 150001

Online:2011-02-10 Published:2011-03-02
Supported by:
National Natural Science Foundation of China（No. 51077020）

摘要/Abstract

摘要：

利用I-DEAS软件的参数化立体建模功能，结合编程软件实现汽轮发电机定子绕组三维参数化自动精确建模系统。依据汽轮发电机定子绕组形成原理，合理选择建模控制参数，讨论三维参数化自动建模过程的关键细节，给出建模方法，通过实际数据的计算机仿真验证了方法的有效性。

关键词:

汽轮发电机定子绕组, 三维建模, 自动建模, I-DEAS

Abstract:

Applying the parametrical modeling capabilities of I-DEAS, an automatic 3D parametric modeling system of turbogenerator stator coil was developed. Parameter selection and some key technologies of the modeling method were discussed in detail based on the forming principle. A simulation of practical data proves that the model can meet the requirements of production in some ways.

Key words:

turbogenerator stator coil, 3D modeling, automatic modeling, I-DEAS

中图分类号:

TP391.72

刘晓芳, 杨世彦, 刘大鹏, 陈景易.

基于I-DEAS的汽轮发电机定子绕组自动三维建模

[J]. 中国机械工程, 2011, 22(3): 317-321.

LIU Xiao-Fang, YANG Shi-Pan, LIU Da-Feng, CHEN Jing-Yi.

3D Automatic Modeling System of Turbogenerator Stator Coil Based on I-DEAS

[J]. China Mechanical Engineering, 2011, 22(3): 317-321.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I3/317