CAD图纸多明细表功能的研究与实现

中国机械工程 ›› 2011, Vol. 22 ›› Issue (12): 1459-1465.

CAD图纸多明细表功能的研究与实现

张卫国;王雅光;罗年猛

华中科技大学国家CAD支撑软件工程技术研究中心，武汉，430074

出版日期:2011-06-26 发布日期:2011-07-01

Research and Implementation of Multiple Parts List for Assembly Drawings in CAD

Zhang Weiguo;Wang Yaguang;Luo Nianmeng

National CAD Support Software Engineering Research Center, Huazhong University of Science and Technology, Wuhan, 430074

Online:2011-06-26 Published:2011-07-01

摘要/Abstract

摘要：

提出了一种适用于二维CAD软件的多明细表实现方案，该方案具有在一张CAD图纸中绘制多张装配图且每张装配图具有独立的明细表功能。采用“观察者-目标”模式对各明细表相关对象进行组织，实现零部件信息与具体图形表达的分离，减少了数据冗余，降低了对象耦合度，简化了数据的组织与提取，同时支持明细表的智能化修改和更新。实际应用表明，该方案提高了工程人员的设计效率，减少了错误的发生。

关键词:

二维CAD;装配图设计;多明细表, BOM

Abstract:

A solution which supported multiple parts lists for two-dimensional CAD software was present. In the solution, multiple assembly drawings were supported in a CAD drawing, and each of them had independent parts list. With organizing the parts list related objects by “observer-subject” mode, the parts information and the graphic components were separated, data redundancy and object coupling were reduced, and the organization and retrieval of data were simplified. At the same time, intelligent modification and data update were supported. The applications show that the design efficiency for assembly body is improved by the solution, and the incidence of errors is reduced.

Key words:

2D-CAD, assembly drawing design, multiple parts list, BOM(bill of material)

中图分类号:

TP391.72

张卫国, 王雅光, 罗年猛.

CAD图纸多明细表功能的研究与实现

[J]. 中国机械工程, 2011, 22(12): 1459-1465.

ZHANG Wei-Guo, WANG Ya-Guang, LUO Nian-Meng.

Research and Implementation of Multiple Parts List for Assembly Drawings in CAD

[J]. China Mechanical Engineering, 2011, 22(12): 1459-1465.

[1]	陈志杨1, 喻谷鸣1, 张引2. 基于样条链（环）的CAD模型过渡特征识别与抑制 [J]. 中国机械工程, 2011, 22(22): 2707-2711.
[2]	熊体凡, 王卫, 刘清华, 万立. 基于参数树状约束的零部件族结构模型研究 [J]. 中国机械工程, 2011, 22(17): 2067-2070,2075.
[3]	张胜文, 李霞, 吴春桥. 基于范例的推理在管件焊接柔性夹具设计系统中的应用研究 [J]. 中国机械工程, 2011, 22(9): 1071-1075.
[4]	刘晓芳, 杨世彦, 刘大鹏, 陈景易. 基于I-DEAS的汽轮发电机定子绕组自动三维建模 [J]. 中国机械工程, 2011, 22(3): 317-321.
[5]	宋凯, 成艾国, 陈少伟, 王国春, 钟志华. 基于蚁群算法面向设计的车身关键截面生成方法 [J]. 中国机械工程, 2010, 21(19): 2383-2389.
[6]	陈阳平, 高亮, 王琛, 谢强, 丁秋林. 直升机数字样机区域化上下文设计方法研究 [J]. 中国机械工程, 2010, 21(15): 1815-1819.
[7]	肖刚, 张立彬, 高飞. 基于实例库自主聚类的自适应产品快速报价策略研究 [J]. 中国机械工程, 2010, 21(1): 80-84.
[8]	孙殿柱, 朱昌志, 范志先, 李延瑞. 基于型面特征的三维散乱点云精简算法 [J]. J4, 2009, 20(23): 2840-2843.
[9]	曹巨江, 李言, 马小琴. 一种基于直纹面误差可控的弧面凸轮复杂廓面建模方法 [J]. J4, 2009, 20(24): 2984-2987.