扩散制造联盟构建过程研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (12): 1434-1440.

扩散制造联盟构建过程研究

安波;廖文和;郭宇;刘骄剑

南京航空航天大学,南京,210016

出版日期:2011-06-26 发布日期:2011-07-01
基金资助:
“十一五”国防基础科研项目
National Defense Basic Scientific Research Project

Research on Construction Process of Extended Manufacturing Alliance

An Bo;Liao Wenhe;Guo Yu;Liu Jiaojian

Nanjing University of Aeronautics & Astronautics,Nanjing,210016

Online:2011-06-26 Published:2011-07-01
Supported by:
National Defense Basic Scientific Research Project

摘要/Abstract

摘要：

针对扩散制造这种面向武器装备等复杂产品网络化制造模式,提出了扩散制造联盟构建方法,给出了网络化制造耦合性等相关概念,并提出了基于降耦及升耦的扩散联盟构建策略;分析扩散任务相关性，建立扩散任务相关性矩阵;分析扩散资源相关性，确定资源配置优化目标，实现了扩散资源升耦优化配置，完成了扩散联盟的构建;描述了某型号扩散制造在扩散联盟构建平台上的应用，验证了扩散联盟构建过程的可行性和实用性。

关键词:

扩散制造联盟, 耦合性, 相关性, 升耦, 降耦

Abstract:

According to extended manufacturing was a new networked manufacturing model,which was oriented to armament and another complex products,a construction method of extended manufacturing alliance was proposed.The concept of networked manufacturing coupling was presented,and the construction process of extended alliance based on rising coupling and dropping coupling strategies was

proposed;The correlation of extended tasks was analyzed, and dropping coupling decomposition was realized.The correlation of extended resources was analyzed,the optimization objective of resource allocation was determined,and extended resources rising coupling allocation was realized.At last, the application of aircraft on the extended manufacturing platform was described,and feasibility and applicability of the method of the extended alliance construction were verified. 

Key words:

extended manufacturing alliance, coupling, correlation, rising coupling, dropping coupling

中图分类号:

TP391

安波, 廖文和, 郭宇, 刘骄剑.

扩散制造联盟构建过程研究

[J]. 中国机械工程, 2011, 22(12): 1434-1440.

AN Bei, LIAO Wen-He, GUO Yu, LIU Jiao-Jian.

Research on Construction Process of Extended Manufacturing Alliance

[J]. China Mechanical Engineering, 2011, 22(12): 1434-1440.

[1]	王倩蓉;姜潮;方腾. 一种考虑参数相关性的可靠性优化设计方法[J]. 中国机械工程, 2018, 29(19): 2312-2319,2326.
[2]	姜潮, 邓青青, 张旺. 考虑参数相关性的结构二阶可靠性分析方法[J]. 中国机械工程, 2016, 27(22): 3068-3074,3081.
[3]	安波1, 廖文和1, 郭宇1, 孙卫红2. 基于相关性的扩散制造任务规划方法研究 [J]. 中国机械工程, 2011, 22(23): 2839-2844.
[4]	谢里阳. 扩展式可靠性建模方法与四元统计模型 [J]. J4, 2009, 20(24): 2969-2973.
[5]	李仕华, 丁文华. 混合螺旋系线性相关性的一般性判据 [J]. J4, 2009, 20(23): 2804-2807.
[6]	周金宇;韩文钦;朱福先;谢里阳;. 系统共因失效概率分析的非经验模型[J]. J4, 2008, 19(15): 0-1769.