石雕形廓五轴联动磨削控制算法研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (12): 1406-1413.

石雕形廓五轴联动磨削控制算法研究

陈为旭;张济宇

福州大学,福州,350002

出版日期:2011-06-26 发布日期:2011-07-01
基金资助:
福建省教育厅A类科技基金资助项目(JA10032)；福州大学科技发展基金资助项目(2005-XQ-06号)
Fujian Provincial Science and Technology Foundation for Band A of Ministry of Education of China（No. JA10032）

Study on Control Algorithm for Stone Sculpture Ground by 5-Axis Feed

Chen Weixu;Zhang Jiyu 

Fuzhou University,Fuzhou,350002

Online:2011-06-26 Published:2011-07-01
Supported by:
Fujian Provincial Science and Technology Foundation for Band A of Ministry of Education of China（No. JA10032）

摘要/Abstract

摘要：

针对石雕复杂型面的切割与磨削加工，提出五轴联动控制算法。通过分片切割石雕型面,利用切面外廓曲线的型值点进行椭圆拟合,得出雕像的椭圆曲线集合,建立了磨削切片与石雕工件相对位置的五轴联动控制模型。该模型适合于国产QSJ改进型桥式石材磨削切机的五轴联动控制加工，实现了磨削切片的空间运动轨迹的插补进给，能较精确地包络出石雕型面上的椭圆曲线。仿真与实际加工测试证明，该控制算法模型能实现石雕复杂型面的自动化磨切加工控制，具有明显的高精度、高效率、高重复性。

关键词:

控制算法, 五轴联动, 型面磨削, 计算机数控, 石雕

Abstract:

A control algorithm in 5-axis simultaneous feed was presented to cut and grind the stone sculpture.By slicing the sculpture in surfaces the nodal points were utilized on the curves,and the elliptic curves in sets were fitted on the sculpture. The control model for relative position between the grinding disc and sculpture was established based on the elliptic curves fitted,which was suitable for 5-axis simultaneous feed in the QSJ reconstructed bridge type stone grinding machine originated in China. The interpolation feed in space moving trace for the grinding disc was realized by using the control algorithm and the elliptic curves were enveloped on the sculpture curves. Both the simulation and the

grinding test show that the automatic grinding control can be realized for complex curve manufacturing on the stone sculpture, and featured with high accuracy, effectiveness and reproducibility.

Key words: control algorithm, 5-axis simultaneous feed, curve grinding, computer numeric control, stone carving

中图分类号:

陈为旭, 张济宇.

石雕形廓五轴联动磨削控制算法研究

[J]. 中国机械工程, 2011, 22(12): 1406-1413.

CHEN Wei-Xu, ZHANG Ji-Yu.

Study on Control Algorithm for Stone Sculpture Ground by 5-Axis Feed

[J]. China Mechanical Engineering, 2011, 22(12): 1406-1413.

[1]	董伯麟, 刘洋, 王治森. 基于双NURBS参数混合插补算法的五轴联动交叉耦合控制器研究[J]. 中国机械工程, 2014, 25(22): 3038-3044.
[2]	孙建立;王续跃;高航;杨连文. 弯管内表面数控铣削加工方法研究[J]. 中国机械工程, 2013, 24(21): 2872-2875,2920.
[3]	杨堂勇1, 冯景春1, 2. 面向五轴联动高速加工的等距双NURBS刀具路径光顺方法[J]. 中国机械工程, 2013, 24(11): 1479-1483.
[4]	陈为旭, 张济宇. 石雕椭圆形廓多轴联动磨削的数学模型 [J]. 中国机械工程, 2010, 21(15): 1788-1793.
[5]	史旭光, 胥布工. 双圆弧数值算法在NURBS曲线插补中的应用 [J]. 中国机械工程, 2010, 21(12): 1387-1391.
[6]	石宏;蔡光起;李景奎;. 混联机床五轴联动加工时刀摆的非线性误差分析与控制[J]. J4, 2008, 19(6): 0-750.