面向过程的产品信息虚拟装配建模技术研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (1): 60-64.

面向过程的产品信息虚拟装配建模技术研究

刘子建;王平;艾彦迪

湖南大学汽车车身先进设计制造国家重点实验室,长沙，410082

出版日期:2011-01-10 发布日期:2011-01-17
基金资助:
国家自然科学基金资助重点项目(60635020)；国家基础研究发展计划(973计划)资助项目(2010328CB002)
Key Program of National Natural Science Foundation of China（No. 60635020）;
National Program on Key Basic Research Project (973 Program)（No. 2010328CB002）

Research on Process-oriented Virtual Assembly Modeling Technology for Product Information

Liu Zijian;Wang Ping;Ai Yandi

State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha，410082

Online:2011-01-10 Published:2011-01-17
Supported by:

Key Program of National Natural Science Foundation of China（No. 60635020）;
National Program on Key Basic Research Project (973 Program)（No. 2010328CB002）

摘要/Abstract

摘要：

为解决虚拟装配过程中产品模型信息的完备性和跟随性等问题，提出了面向装配过程的产品信息虚拟装配模型，该模型运用属性机制建立模型几何拓扑信息与非几何信息的映射关系，依据信息粒度采用树型框架结构构造信息的多层次表达结构，满足虚拟装配过程中产品信息表达完备、动态跟随和实时性要求。开发了虚拟装配建模系统，验证了实现技术的可行性。

关键词:

虚拟装配, 产品信息, 属性机制, 树型框架结构

Abstract:

In order to solve the problems such as completeness and following performance of product model information in process of virtual assembly, a process-oriented virtual assembly model for product information was proposed herein.It applied attribute frame to constitute the mapping among geometry topology information and non-geometry information，and based on information granularity，the structure of multi-layer representation for assembly model information was constructed by framework of tree structure.It can satisfy the requirements of representation completeness, dynamic following and real-time in virtual assembly．A modeling system was established and its feasibility was verified by research results.

Key words:

virtual assembly, product information, attribute frame, framework of tree structure

中图分类号:

TP391

刘子建, 王平, 艾彦迪.

面向过程的产品信息虚拟装配建模技术研究

[J]. 中国机械工程, 2011, 22(1): 60-64.

LIU Zi-Jian, WANG Beng, AI Pan-Di.

Research on Process-oriented Virtual Assembly Modeling Technology for Product Information

[J]. China Mechanical Engineering, 2011, 22(1): 60-64.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2011/V22/I1/60

[1]	王海朔, 陈科, 郑红梅, 汪园园. [产品服务]“内容-交互”双维度产品信息处理方法及应用[J]. 中国机械工程, 2018, 29(20): 2432-2437,2445.
[2]	简琤峰. 语义网格环境下虚拟组织异构产品信息的语义在线重组技术 [J]. 中国机械工程, 2011, 22(1): 54-59.
[3]	江伟光;武建伟;潘双夏;郭峰;. 基于元模型的产品全生命周期信息模型研究[J]. J4, 2008, 19(12): 0-1511.
[4]	徐翔斌;周新建;萧;乾. 支持产品设计的知识仓库框架研究[J]. J4, 2007, 18(22): 0-2716.