面向关键零件的扩散制造单元选择方法研究

中国机械工程 ›› 2011, Vol. 22 ›› Issue (1): 44-48.

面向关键零件的扩散制造单元选择方法研究

安波;廖文和;郭宇;刘骄剑

南京航空航天大学，南京，210016

出版日期:2011-01-10 发布日期:2011-01-17

Research on Selection Method of Extended Manufacturing Units Oriented Key Parts

An Bo;Liao Wenhe;Guo Yu;Liu Jiaojian

Nanjing University of Aeronautics and Astronautics,Nanjing, 210016

Online:2011-01-10 Published:2011-01-17

摘要/Abstract

摘要：

针对扩散制造这种紧耦合网络化制造模式，提出了面向关键零件的扩散制造单元选择方法。建立了关键零件制造过程的PPR（零件、工艺、制造资源）本体模型;设计了扩散关键件加工需求与扩散制造单元制造能力匹配度计算流程;分析扩散工艺及制造单元重构特性，利用信息熵的原理，实现了扩散制造重构复杂性度量。通过应用实例验证了该选择方法的有效性。

关键词:

扩散制造单元, 关键零件;PPR本体模型; 匹配度; 重构复杂度

Abstract:

According to the particularity of extended manufacturing which is a tight coupled networked manufacturing model, a selection method of extended manufacturing units oriented key parts was put forward. In the view of manufacturing process, the key parts PPR model was constructed; on the basis of the model, the flow of matching degree algorithm between the manufacturing requirements and the manufacturing capability was designed; the reconfiguration characteristics of process and manufacturing units were analyzed, and based on information entropy theory, the measurement of complexity degree of extended manufacturing reconfiguration was carried out. At last, an instance was provided to testify the validity of the selection method of manufacturing units.

Key words:

extended manufacturing unit, key parts;part,process and resource(PPR) ontology model, matching degree, reconfiguration complexity

中图分类号:

TP391

安波, 廖文和, 郭宇, 刘骄剑.

面向关键零件的扩散制造单元选择方法研究

[J]. 中国机械工程, 2011, 22(1): 44-48.

AN Bei, LIAO Wen-He, GUO Yu, LIU Jiao-Jian.

Research on Selection Method of Extended Manufacturing Units Oriented Key Parts

[J]. China Mechanical Engineering, 2011, 22(1): 44-48.

参考文献

[1]俞烽[1],廖文和[1],郭宇[1],刘金山[1].工艺快速扩散系统的研究[J].中国机械工程,2007,18(19):2322-2325.
[2]俞烽[1],廖文和[1],郭宇[1],刘骄剑[1].基于工作流的工艺快速扩散管理[J].计算机集成制造系统,2008,14(2):366-371.
[3]贺文锐[1],秦忠宝[1],何卫平[1].基于功能语义扩展的网络化制造环境下的资源发现研究[J].中国机械工程,2005,16(11):974-978.
[4]蔡铭,林兰芬,陈刚,董金祥.网络化制造环境中制造资源的智能发现技术研究[J].计算机集成制造系统,2003,9(7):589-594.
[5]Li Xia, Zhang Jianlin, Huang Tao. A Standardized Learning Resources Retrieval System Based on Ontology Matching[J]. Lecture Notes in Computer Science, 2007,4469:411-421.
[6]马鹏举[1],梁正和[2],卢秉恒[2],田杰谟[1].基于产品相似性和CCA数据评价的盟员选择策略与算法[J].清华大学学报：自然科学版,2001,41(10):40-44.
[7]邢建国.定制生产下工艺可重用理论、方法及关键技术研究与应用 [D].浙江大学,2001:
[8]Lemaignan S, Siadat A, Dantan J Y, et al. MASON:a Proposal for an Ontology of Manufacturing Domain[C]//IEEE Workshop on Distributed Intelligent Systems Collective Intelligence and Its Applications. Los Alamitos: IEEE Computer Society Press, 2006 : 195-200.
[9]Hao Yongtao. Research on Auto- reasoning Process Planning Using a Knowledge Based Semantic Net[J]. Knowledge-- Based System, 2006,19 (8) : 755-764.
[10]许国治,等.系统科学[M].上海:上海科技教育出版社,2000.
[11]王先逵.机械加工工艺手册[M].北京:机械工业出版社,2008.
[12]俞烽.武器装备工艺快速扩散系统关键技术研究与应用[D].南京:南京航空航天大学,2008.
[13]Zhou Meili. Formation Principles and Similarity between Similar Systems[J]. International Journal of General System, 1999,27(6) :495-504.
[14]Sivadasan S, Efstathiou J, Calinescu A. Advances on Measuring the Operational Complexity of Sup- plier - customer Systems[J]. European Journal of Operational Research, 2006,171 ( 1 ) : 208-226.
[15]Isik Filiz. An Entropy--based Approach for Measuring Complexity in Supply Chains [J]. Internayional Journal of Production Research, 2009, 48 (12) : 3681-3696.