多尺度表面形貌的功能评定与控制

中国机械工程 ›› 2010, Vol. 21 ›› Issue (7): 773-777.

多尺度表面形貌的功能评定与控制

胡兆稳;刘小君;王静;刘焜

合肥工业大学,合肥,230009

出版日期:2010-04-10 发布日期:2010-04-16
基金资助:
国家863高技术研究发展计划资助项目(2007AA04Z119)
National High-tech R&D Program of China (863 Program) （No. 2007AA04Z119）

Functional Assessment and Manufacturing Control of Multi-scale Surfaces

Hu Zhaowen;Liu Xiaojun;Wang Jing;Liu Kun

Hefei University of Technology,Hefei,230009

Online:2010-04-10 Published:2010-04-16
Supported by:
National High-tech R&D Program of China (863 Program) （No. 2007AA04Z119）

摘要/Abstract

摘要：

多尺度表面中,不同加工过程形成的纹理成分具有不同的粗糙度尺度和性能。多尺度表面形貌的功能评定,关键是识别不同的纹理成分,描述其功能属性。基于概率曲线和支承率曲线,提出一种多尺度表面形貌的功能评定方法,并研究了表面形貌的加工控制问题。对平台珩磨缸套表面的功能评定与控制研究表明,这种多尺度表面的功能评定方法是可行的。以ISO13565-3粗糙度参数为纽带,建立联系表面功能与加工工艺的经验模型,可以实现面向功能的表面质量控制。

关键词:

表面形貌, 多尺度表面, 概率曲线, 支承率曲线



Abstract:

Due to the fact that different components of texture generated by different manufacturing processes has different scales and tribological properties,the key to functional assessment of multi-scale surfaces is to identify roughness components and to describe their functional properties.A method of assessing the functional properties of multi-scale surface was presented based on material probability curve and material ratio curve,and manufacturing control to meet the functional requirements for surface was investigated.Application to plateau honed cylinder liner suggests that the method is effective,and manufacturing quality control can be achieved providing that an empirical model relating surface performance and manufacturing process is developed by means of roughness parameters defined in ISO13565-3.

Key words:

surface topography, multi-scale surface, material probability curve, material ratio curve

中图分类号:

TG84

胡兆稳, 刘小君, 王静, 刘焜.

多尺度表面形貌的功能评定与控制

[J]. 中国机械工程, 2010, 21(7): 773-777.

HU Zhao-Wen, LIU Xiao-Jun, WANG Jing, LIU Kun. Functional Assessment and Manufacturing Control of Multi-scale Surfaces[J]. China Mechanical Engineering, 2010, 21(7): 773-777.

参考文献

[1]Hegemier T,Steward M. Some Effects of Liner Finish on Diesel Engine Operating Characteristics[J]. SAE Paper, 93076,1993.
[2]Dung W P, Sullivan P J, Stout K J. Comprehensive Study of Parameters for Characterizing Three--dimensional Surface Topography-- Ⅲ: Parameters for Characterizing Amplitude and Some Functional Properties[J]. Wear, 1994,178 : 29-43.
[3]Dong W P, Sullivan P J, Stout K J. Comprehensive Study of Parameters for Characterising 3- D Surface Topography- Ⅰ: Some Inherent Properties of Parameter Variation[J]. Wear, 1992,159:161-171.
[4]Dong W P, Sullivan P J, Stout K J. Comprehensive Study of Parameters for Characterising 3 -- D Sur-face Topography--Ⅱ: Statistical Properties of Parameter Variation[J]. Wear, 1993,167 : 9-21.
[5]Dong W P, Sullivan P J, Stout K J. Comprehensive Study of Parameters for Characterizing Three--dimensional Surface Topography--Ⅳ: Parameters for Characterizing Spatial and Hybrid Properties[J]. Wear, 1994,178 : 45-60.
[6]Dong W P,Davis E J,Butler D L,et al. Topographic Features of Cylinder Liners-an Application of Three- dimensional Characterization Techniques [J]. Tribology International, 1995,28(7):453-463.
[7]刘小君,丁曙光.表面形貌摩擦学功能表征参数的研究[J].合肥工业大学学报：自然科学版,1998,21(6):68-71.
[8]German Standard Organisation. DIN 4776- 1990 Measurement of Surface Roughness: Parameters Rk, Rpk, Rvk, Mr1, Mr2 for the Description of the Material Portion in the Roughness[S~. Berlin: German Standard Organisation, 1990.
[9]ISO 13565--2--1996 Geometrical Product Specifications (GPS) -- Surface Texture: Profile Method; Surfaces Having Stratified Functional Properties-- Part 2: Height Characterisation Using the Linear Material Ratio Curve[S]. Geneva: ISO, 1996.
[10]ISO/TS CD 25178 Specifications ( GPS ) 2--2006 Geometrical Product -- Surface Texture; Areal -- Part 2;Terms,Definition and Surface Texture Pa rameters[S]. Geneva : ISO, 2007.
[11]全国内燃机标准化技术委员会.JB/T9768-1999内燃机气缸套平台珩磨网纹技术规范及检测方法[S].北京:国家机械工业局,1999.
[12]Pawlus P, Grabon W. The Method of Truncation Parameters Measurement from Material Curve[J]. Precision Engineering, 2008,32 (4) : 342-347.
[13]ISO13565--3--1998 Geometrical Product Specifications (GPS) -- Surface Texture : Profile Method Surfaces Having Stratified Functional Properties- Part 3:Height Characterisation Using the Material Probability Curve[S]. Geneva: ISO, 1998.
[14]Sannaredy H,Raja J,Chen K. Characterization of Surface Texture Generated by Multi process Manufacture[J]. Int. J. Mach. Tools Manufacture,1998,38:529-536.
[15]Anderberg C,Pawlus P, Rosfn B G, et al. Alternative Descriptions of Roughness for Cylinder Liner Production [J]. Journal of Materials Processing Technology,2009,209(4) : 1936-1942.
[16]Feng Changxue, Wang Xianfeng, Yu Zhiguang. Neural Networks Modeling of Honing Surface Roughness Parameters Defined by ISO 13565[J]. Journal of Manufacturing Systems, 2002,21(5): 395-408.