模具型面及冲头对304不锈钢三通成形效果影响研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (15): 1875-1878,1889.

模具型面及冲头对304不锈钢三通成形效果影响研究

郭训忠1;陶杰1;李鸣2

1.南京航空航天大学,南京,210016;;

2.江苏华阳金属管件有限公司,镇江,212400

出版日期:2010-08-10 发布日期:2010-09-19
基金资助:
江苏省重大成果转化专项基金资助项目(BA2006067)；江苏省博士生创新基金资助项目(CX09B-077Z)

Influence of Die Surface and Punch Style on Forming Effects of SS304 T-shapes by Hydroforming

Guo Xunzhong1;Tao Jie1;Li Ming2

1.Nanjing University of Aeronautics and Astronautics, Nanjing, 210016

2.Jiangsu Huayang Metal Pipes Co.,Ltd, Zhenjiang,Jiangsu, 212400

Online:2010-08-10 Published:2010-09-19

摘要/Abstract

摘要：

利用数值模拟研究了不同形式模具型面及冲头对采用液压胀形工艺制备的三通管件成形质量的影响,并研究了不同成形压力加载路径对应的成形效果。根据数值模拟结果,采用新型润滑涂层及相应的成形装置进行了管件冷成形实验。在支管高度、壁厚减薄率分布方面,管件实验结果与模拟结果非常一致。研究结果表明,采用较优的模具型面及冲头可以有效提高三通管件的成形质量。

关键词:

304不锈钢, 三通管件, 液压胀形, 数值模拟

Abstract:

The effects of die surface and punch on the forming quality of T-shapes by hydroforming were investigated by means of the numerical simulation. The forming effects of different loading paths in the process were investigated. Subsequently, a practical hydroforming was performed based on the simulation results with the aid of special lubrication coatings. It is obviously indicated that the simulation results agree well with the experimental ones in protrusion height and wall thickness distribution. The results show that the better die face and the punch can improve the quality of T-shapes effectively.

Key words: SS304, T-shape, hydroforming, numerical simulation

中图分类号:

TG386.43

郭训忠, 陶杰, 李鸣.

模具型面及冲头对304不锈钢三通成形效果影响研究

[J]. 中国机械工程, 2010, 21(15): 1875-1878,1889.

GUO Xun-Zhong, DAO Jie, LI Ming.

Influence of Die Surface and Punch Style on Forming Effects of SS304 T-shapes by Hydroforming

[J]. China Mechanical Engineering, 2010, 21(15): 1875-1878,1889.

参考文献

[1]格拉西莫夫B B,莫纳霍夫A V.核工程材料[M].北京:原子能出版社,1987.
[2]宋忠财.三通管液压胀形成形过程分析[D].上海交通大学,2005:
[3]Dohmann F, Hartl C. Hydroforming- a Method to Manufacture Light--weight Parts[J]. Journal of Materials Processing Technology, 1996, 60:669 - 676.
[4]Dohmann F, Hartl C. Tube Hydroforming--research and Practical Application[J]. Journal of Materials Processing Technology, 1997,71 : 174-186.
[5]Ahmetoglu M, Altan T. Tube Hydroforming: State-- of--theart and Future Trend [JJ. Journal of Materials Processing Technology, 2000,98 : 25-38.
[6]Cheng D M, Teng B G, Guo B, et al. Deformation and Defects in Hydroforming of Y-shaped Tubes [J]. Journal of Harbin Institute of Technology ( New Series), 2008,15 : 206-210.
[7]Cheng D M, Teng B G, Guo B, et al. Thickness Distribution of a Hydroformed Y--shape Tube[J]. Materials Science and Engineering A, 2009, 499: 36-39.
[8]Hwang Y M, Lin T C, Chang W C. Experiments on T -shape Hydroforming with Counter Punch[J]. Journal of Materials Processing Technology, 2007, 192/ 193:243-248.
[9]Lin F C, Kwan C T. Application of Abductive Network and FEM to Predict an Acceptable Product on T --shape Tube Hydroforming Process[J]. Computers and Structures, 2004,82:1189-1200.
[10]Ray P, Mac Donald B J. Determination of the Optimal Load Path for Tube Hydroforming Processes Using a Fuzzy Control Algorithm and Finite Element Analysis[J]. Finite Element in Analysis and Design, 2004, 41:173-192.
[11]Aydemir A, Vree J H P, Brekelmans W A M, et al. An Adaptive Simulation Approach Designed for Tube Hydroforming Processes[J]. Journal of Materials Processing Technology, 2005,159 : 303-310.
[12]Ingarao G, Lorenzo R D, Micari F. Internal Pressure and Counter Punch Action Design in Y--shaped Tube Hydroforming Processes: a Multi- objective Optimis- ation Approach[J]. Computers and Structures,2009, 87:591-602.
[13]Manabea K, Suetakea M, Koyamab H, et al. Hydro- forming Process Optimization of Aluminum Alloy Tube Using Intelligent Control Technique [J]. International Journal of Machine Tools and Manufacture, 2006,46: 1207-1211.
[14]Heo S C, Kima J, Kang B S. Investigation on Determination of Loading Path to Enhance Formability in Tube Hydroforming Process Using APDL[J]. Journal of Materials Processing Technology, 2006,177 : 653- 657.
[15]李乐周杰王梦寒等.三通管内高压成形有限元模拟工艺分析.塑性加工技术,2004,(6):53-55.
[16]Lin F C, Kwan C T. Investigation of T--shape Tube Hydroforming with Finite Element Method [J]. Advanced Mafacturing Technology, 2003,21 : 420-425.