中国机械工程 ›› 2010, Vol. 21 ›› Issue (15): 1820-1824.

• 信息技术 • 上一篇    下一篇

大规模定制环境下的参数驱动产品配置设计方法研究

艾辉;万立;熊体凡;陈立平
  

  1. 华中科技大学国家CAD支撑软件工程技术研究中心,武汉,430074
  • 出版日期:2010-08-10 发布日期:2010-09-19
  • 基金资助:
    国家863高技术研究发展计划资助项目(2007AA40603)
    National High-tech R&D Program of China (863 Program) (No. 2007AA40603)

Parameter-driven Configuration Design Method in Mass Customization

Ai Hui;Wan Li;Xiong Tifan;Chen Liping
  

  1. National CAD Support Software Engineering Research Center, Huazhong University of Science and Technology, Wuhan, 430074
  • Online:2010-08-10 Published:2010-09-19
  • Supported by:
    National High-tech R&D Program of China (863 Program) (No. 2007AA40603)

摘要:

为了提高大规模定制环境下制造型企业产品配置设计的效率,提出了一种参数驱动产品配置设计方法。该方法以参数化配置单元(PCU)为基本元素构建产品结构模型,封装了功能、性能、结构、几何等特征相似的零部件,使用参数表征零部件的特征,并定义基于参数的驱动规则,将产品的配置知识转化为特征参数之间的约束关系。在此基础上设计了基于递归算法的快速配置求解过程。最后以某企业的防火门产品实际应用为例,验证了该方法的可行性。

关键词:

Abstract:

In order to improve the efficiency of product configuration design in mass customization, a parameter-driven product configuration design method was put forward. In the presented method, parametric configuration unit (PCU) encapsulating all components that are similar to each orther in function, performance, structure, geometry and other characteristics expressed by parameters was as the basic element for building a product structure model, and the parameter-drive rules that represented the product configuration knowledge as constraint relations between characteristic parameters was defined. Then, a rapid configuration process based on recursive algorithm was illustrated. Finally, a fire door product case was given to verify the feasibility of the method.

Key words: mass customization, product configuration, parameter drive, parametric configuration unitPCU

中图分类号: