磁粉离合器仿真分析研究

中国机械工程 ›› 2010, Vol. 21 ›› Issue (10): 1149-1152.

磁粉离合器仿真分析研究

周云波, 常思勤

南京理工大学,南京,210094

出版日期:2010-05-25 发布日期:2010-06-02
基金资助:
江苏省自然科学基金资助项目(BK2008414)；江苏省博士后科研资助计划项目(AD41198)
Jiangsu Provincial Natural Science Foundation of China（No. BK2008414）;
Supported by Jiangsu Provincial Postdoctoral Science Research Program（No. AD41198）

Simulation and Analysis of Magnetic Particle Clutch

Zhou Yunbo;Chang Siqin

Nanjing University of Science and Technology,Nanjing,210094

Online:2010-05-25 Published:2010-06-02
Supported by:

Jiangsu Provincial Natural Science Foundation of China（No. BK2008414）;
Supported by Jiangsu Provincial Postdoctoral Science Research Program（No. AD41198）

摘要/Abstract

摘要：

提出了基于三维磁场仿真分析的磁粉离合器电磁场分析方法。利用Ansoft电磁场仿真分析软件,建立磁粉离合器的三维仿真模型,通过较为精细的自适应网格对其力矩—激磁电流关系、力矩—滑差特性进行了分析,分析结果表明仿真分析数据与试验数据相一致,确定了磁粉离合器主要设计参数与其性能之间的定量关系,可以作为进行磁粉离合器优化设计的基础。

关键词:

磁粉离合器, Ansoft, 三维磁场仿真分析, 磁粉模型

Abstract:

This paper presented a method of magnetic particle clutch simulation and analysis by using three-dimensional magnetic field simulation analysis.Through Ansoft software,a three-dimensional model of magnetic particle clutch was built.The relationship between torque and exciting current, property of torque and slip were analysed by a more accurate self-adaptive grid. The results show that simulation data corresponds to test data. Quantitative relationship between main design parameters of magnetic particle clutch and performance was identified.It can be used as the basis for magnetic particle clutch optimum

design.

Key words: magnetic particle clutch, Ansoft, three-dimensional magnetic field simulation analysis, magnetic particle model

中图分类号:

TP133.4

周云波, 常思勤.

磁粉离合器仿真分析研究

[J]. 中国机械工程, 2010, 21(10): 1149-1152.

ZHOU Yun-Bei, CHANG Sai-Qi.

Simulation and Analysis of Magnetic Particle Clutch

[J]. China Mechanical Engineering, 2010, 21(10): 1149-1152.