基于形态学算法的摄影测量数据噪声滤波

中国机械工程 ›› 2008, Vol. 19 ›› Issue (1): 48-51.

基于形态学算法的摄影测量数据噪声滤波

闫龙¹;赵正旭²;周以齐¹

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-01-10 发布日期:2008-01-10

Cloud Data Filter Based on Morphological Operator in Photogrammetry

Yan Long¹;Zhao Zhengxu²;Zhou Yiqi¹

Received:1900-01-01 Revised:1900-01-01 Online:2008-01-10 Published:2008-01-10

摘要/Abstract

摘要：

摄影测量的点云数据通常叠加有多种形式的噪声信号，针对摄影测量中得到的扫描线形式的点云数据，采用形态学算子进行了噪声滤除。在完成噪声滤波的同时，在一定程度上对零件陡峭处获得的数据进行自动拟合。实例验证表明，该滤波方法处理速度快，其效果比其他的滤波方法好，滤波后的数据符合曲线曲面重构的要求。

关键词: 摄影测量, 扫描线点云数据, 形态学算子, 开运算, 闭运算, 自适应噪声滤波

Abstract:

Much noise exists in cloud data due to deviation of system and matching algorithm in photogrammetry. This paper presented an algorithm for scan line cloud data filtering. It fulfiled the noise filtering, and rectified data in creep region. Experiments show that it has higher speed and better results than that of comparison algorithm. The filtered results are most applicable to curve or surface reconstruction.

Key words: photogrammetry, scan line cloud data, morphological operator, open operation, close operation, adaptive noise filtering

中图分类号:

TP391

闫龙, 赵正旭, 周以齐. 基于形态学算法的摄影测量数据噪声滤波[J]. 中国机械工程, 2008, 19(1): 48-51.

Yan Long, Zhao Zhengxu, Zhou Yiqi. Cloud Data Filter Based on Morphological Operator in Photogrammetry[J]. China Mechanical Engineering, 2008, 19(1): 48-51.

[1]	冉险生, 朱才朝, 黄泽好 . 工业近景摄影测量中基于非量测镜头的误差分析[J]. 中国机械工程, 2014, 25(19): 2603-2607.
[2]	张德海;梁晋;唐正宗;郭成;. 基于近景摄影测量和三维光学测量的大幅面测量新方法 [J]. J4, 2009, 20(07): 0-762.
[3]	梁晋;肖振中;刘建伟;梁新合;. 大型飞机三维光学快速测量建模关键技术研究[J]. J4, 2009, 20(06): 0-635.
[4]	闫龙;赵正旭;周以齐;. 摄影测量中单一纹理的立体匹配方法研究[J]. J4, 2008, 19(19): 0-2272.