基于能耗的冷轧连退机组能效建模与工艺参数优化及排序建模优化

doi:10.3969/j.issn.1004-132X.2020.14.012

中国机械工程 ›› 2020, Vol. 31 ›› Issue (14): 1724-1732.DOI: 10.3969/j.issn.1004-132X.2020.14.012

基于能耗的冷轧连退机组能效建模与工艺参数优化及排序建模优化

杨杰¹, 胡琦¹, 肖亭¹, 张文颖¹, 张超勇²

1. 中国地质大学(武汉)机械与电子信息学院, 武汉, 430074;
2. 华中科技大学数字制造装备与技术国家重点实验室, 武汉, 430074

收稿日期:2019-03-28 出版日期:2020-07-25 发布日期:2020-08-26
通讯作者: 张文颖(通信作者),女,1986年生,副教授。研究方向为固体氧化物燃料电池(SOFC)关键材料、电堆制造与系统集成。E-mail:zhangwenying86@126.com。
作者简介:杨杰,男,1968年生,教授。研究方向为燃料电池、可持续设计与制造等。E-mail:flyyangj@163.com。
基金资助:
国家自然科学基金国际（地区）合作与交流项目（51561125002）；国家自然科学基金资助项目（51575211，51805330，51705263）；高等学校学科创新引智计划资助项目（B16019）

Energy Efficiency Modeling, Process Parameter Optimization and Sequencing Modeling Optimization of Cold Rolling Continuous Annealing Units Based on Energy Consumptions

YANG Jie¹, HU Qi¹, XIAO Ting¹, ZHANG Wenying¹, ZHANG Chaoyong²

1. School of Mechanical and Electronic Information, China University of Geosciences, Wuhan, 430074;
2. State Key Laboratory of Digital Manufacturing Equipment and Technology, Huazhong University of Science and Technology, Wuhan, 430074

Received:2019-03-28 Online:2020-07-25 Published:2020-08-26

摘要/Abstract

摘要： 以冷轧连续退火机组能耗集中的炉区作为研究对象，根据能量流与热力学理论，建立了能耗与主要工艺参数之间的映射模型；采用MATLAB结合一种改进的量子遗传算法对能效模型进行优化，获取在保证质量的前提下能效最高的工艺参数组合；以辅助设备能耗最低、生产规格跳变平缓以及满足交货期为优化目标，建立了冷轧连退产线生产调度多目标优化模型，采用非支配排序遗传算法（NSGA-Ⅱ）进行求解，得出最优排序。结果表明，该模型和算法对生产实际有一定的指导作用。

关键词: 退火机组, 能效模型, 量子遗传算法, 调度模型, 非支配排序遗传算法

Abstract: The furnace area with concentrated energy consumption of cold rolling continuous annealing units was studied. The theory of energy flow and thermodynamics was used to establish a mapping model between energy consumption and main process parameters. Combining MATLAB and an improved quantum genetic algorithm, the energy efficiency model was optimized to obtain a process parameter combinations with the highest energy efficiency under the premise of quality assurance. The minimum energy consumption of auxiliary equipment, the smooth transition of production specifications and the satisfaction of delivery time were used as optimization targets. The multi-objective optimization model of production scheduling for cold rolling continuous annealing lines was established and solved by NSGA-Ⅱ, and then the optimal sorting was presented. The results show that the model and the algorithm have a certain guiding effectiveness on production.

Key words: annealing unit, energy efficiency model, quantum genetic algorithm, scheduling model, non-dominated sorting genetic algorithm(NSGA-Ⅱ)

中图分类号:

TH18

杨杰, 胡琦, 肖亭, 张文颖, 张超勇. 基于能耗的冷轧连退机组能效建模与工艺参数优化及排序建模优化[J]. 中国机械工程, 2020, 31(14): 1724-1732.

YANG Jie, HU Qi, XIAO Ting, ZHANG Wenying, ZHANG Chaoyong. Energy Efficiency Modeling, Process Parameter Optimization and Sequencing Modeling Optimization of Cold Rolling Continuous Annealing Units Based on Energy Consumptions[J]. China Mechanical Engineering, 2020, 31(14): 1724-1732.

参考文献

[1] 国际钢铁协会.世界钢铁统计数据[EB/OL].[2019-03-01]. https://www.worldsteel.org/zh/steel-by-topic/statistics/steel-statistical-yearbook/World-Steel-in-Figures.html. World Steel Association. World Steel Statistics[EB/OL].[2019-03-01].https://www.worldsteel.org/zh/steel-by-topic/statistics/steel-statistical-yearbook/World-Steel-in-Figures.html.
[2] 国外钢铁业绿色节能效果窥探[EB/OL].[2019-03-01]. http://news.bjx.com.cn/html/20140415/503821.shtml. Green Energy-saving Effect of Steel Industry Abroad[EB/OL].[2019-03-01]. http://news.bjx.com.cn/html/20140415/503821.shtml.
[3] GAO L, HUANG J D. An Effective Cellular Particle Swarm Optimization for Parameters Optimization of a Multi-pass Milling Process[J]. Applied Soft Computing, 2012, 12(11):3490-3499.
[4] PARK H S, TRAN N H. Development of a Smart Machining System Using Self-optimizing Control[J]. The International Journal of Advanced Manufacturing Technology, 2014, 74(9/12):1365-1380.
[5] 马峰, 张华, 曹华军. 面向低能耗少切削液的多目标加工参数优化[J]. 机械工程学报, 2017, 53(11):157-163. MA Feng, ZHANG Hua, CAO Huajun. Optimization of Multi-objective Machining Parameters for Low Energy Consumption and Less Cutting Fluid[J]. Journal of Mechanical Engineering, 2017, 53(11):157-163.
[6] POURSINA M, DEHKORDI N T, FATTAHI A, et al. Application of Genetic Algorithms to Optimization of Rolling Schedules Based on Damage Mechanics[J]. Simulation Modeling Practice and Theory, 2012(22):61-73.
[7] 唐立新.基于智能优化的钢铁生产计划与调度研究[J].管理学报,2005(3):263-267. TANG Lixin. Study on Steel Production Planning and Scheduling Based on Intelligent Optimization[J].Chinese Journal of Management,2005(3):263-267.
[8] TANG L, LIU J, RONG A, et al. An Effective Heuristic Algorithm to Minimise Stack Shuffles in Selecting Steel Slabs from the Slab Yard for Heating and Rolling[J]. Journal of the Operational Research Society, 2001, 52(10):1091-1097.
[9] WANG L, GAO X, WANG W. Dynamic Scheduling Method Based on Multi-agent for Cold Rolling Whole Line[C]//Proceedings of the 32nd Chinese Control Conference. Xi'an, 2013:8082-8087.
[10] VERDEJO V V, ALARCO M A P, SORLI M P L. Scheduling in a Continuous Galvanizing Line[J]. Computers & Operations Research, 2009, 36(1):280-296.
[11] 王秉铨,姜生远,王秋. 工业炉设计手册[M]. 北京:机械工业出版社,2011. WANG Bingquan, JIANG Shengyuan, WANG Qiu. Industrial Furnace Design Handbook[M]. Beijing:Mechanical Industry Press, 2011.
[12] 张多蒙. 基于改进量子遗传算法的微电网电源经济性优化配置研究[D].沈阳:沈阳工程学院,2017. ZHANG Duomeng. Research on Optimization and Configuration of Power Grid Economics Based on Improved Quantum Genetic Algorithm[D]. Shenyang:Shenyang Institute of Technology, 2017.
[13] 符杨,蒋一鎏,李振坤.基于混合量子遗传算法的微电网电源优化配置[J].电力系统保护与控制,2013,41(24):50-57. FU Yang, JIANG Yiliu, LI Zhenkun. Optimization Configuration of Microgrid Power Supply Based on Hybrid Quantum Genetic Algorithm[J].Power System Protection and Control,2013,41(24):50-57.
[14] KANT G, SANGWAN K S. Prediction and Optimization of Machining Parameters for Minimizing Power Consumption and Surface Roughness in Machining[J]. Journal of Cleaner Production, 2014, 83:151-164.
[15] 李修倩,冯好娣. 最小化完成时间和加惩罚值和的批调度问题[J].计算机研究与发展,2013,50(8):1700-1705. LI Xiuqian, FENG Haodi. The Problem of Batch Scheduling with Minimum Completion Time and Penalty Value[J]. Computer Research and Development, 2013, 50(8):1700-1705.

基于能耗的冷轧连退机组能效建模与工艺参数优化及排序建模优化

Energy Efficiency Modeling, Process Parameter Optimization and Sequencing Modeling Optimization of Cold Rolling Continuous Annealing Units Based on Energy Consumptions

RichHTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

[1]	田启华, 明文豪, 文小勇, 杜义贤, 周祥曼. [生产计划]基于NSGA-Ⅱ的产品开发任务调度多目标优化[J]. 中国机械工程, 2018, 29(22): 2758-2766.
[2]	邓朝晖1,2;符亚辉1,2;万林林1,2;张华1,2. 面向绿色高效制造的铣削工艺参数多目标优化[J]. 中国机械工程, 2017, 28(19): 2365-2372.
[3]	徐本柱, 吉靖, 费晓璐. 柔性作业车间中基于工序分批的调度问题与求解[J]. 中国机械工程, 2016, 27(23): 3221-3229.
[4]	王献红, 史国权. 一种基于单元化制造及时间任务总线的计划调度模式构建[J]. 中国机械工程, 2015, 26(5): 637-640.
[5]	李言, 巴黎, 曹源, 刘永, 杨明顺. 考虑多目标的工艺规划与调度集成问题研究[J]. 中国机械工程, 2015, 26(17): 2344-2351,2373.
[6]	李胜1;张培林1;李兵1;王国德2. 基于量子遗传算法的轴向柱塞泵故障特征选择[J]. 中国机械工程, 2014, 25(12): 1659-1644.
[7]	张美华, 李爱平, 徐立云. 基于Pareto最优的多企业协同计划调度优化[J]. 中国机械工程, 2012, 23(5): 563-569.
[8]	黄东胜, 邹富顺, 冯波. 基于NSGA_2与LMI的主动悬架混合H₂/H_∞鲁棒控制 [J]. 中国机械工程, 2011, 22(13): 1634-1637.
[9]	尹汉锋1, 2, 文桂林1, 2, 马传帅1, 2, 韩汪利1, 2. 蜂窝结构缓冲装置的优化设计 [J]. 中国机械工程, 2011, 22(10): 1153-1158.