Review on ICE Remanufacture with Additive Repair Technology

Abstract

Abstract: The principles and characteristics of additive repair technology were described, such as laser cladding, cold welding, thermal spraying and brush plating, etc. Also research progresses and applications of additive repair technology in crankshafts, connecting rods and cylinder blocks were maninly introduced and summarized, and the future research foci on laser cladding, cold welding, thermal spraying and brush plating were pointed out. The development trend of additive technology of remanufacturing for ICE was prospected.

Key words: additive manufacturing, internal combustion engine(ICE), remanufacture, repair

摘要： 阐述了激光熔覆、冷焊、热喷涂与电刷镀等增材修复技术的原理，重点介绍了增材修复技术在内燃机关键零部件再制造修复方面的研究应用进展，总结了曲轴、连杆、缸体等关键零部件的再制造修复方法,指出了激光熔覆、冷焊、热喷涂及电刷镀技术未来研究的重点，展望了内燃机增材再制造修复技术未来的发展趋势。

关键词: 增材制造, 内燃机, 再制造, 修复

CLC Number:

TK406
T19

LI Fangyi1，2;LI Zhen1，2;WANG Liming1，2;LI Jianfeng1，2;LI Yanle1，2;LU Haiyang1，2;SHANG Jiantong1，2. Review on ICE Remanufacture with Additive Repair Technology[J]. China Mechanical Engineering.

李方义1，2;李振1，2;王黎明1，2;李剑峰1，2;李燕乐1，2;鹿海洋1，2;商建通1，2. 内燃机增材再制造修复技术综述[J]. 中国机械工程.

References

[1]邢敏. 内燃机再制造产业发展与技术路线[M]. 北京: 机械工业出版社, 2017: 2-6.
XING Min. Industry Development and Technical Route of Internal Combustion Engine Remanufacturing[M]. Beijing: Mechanical Industry Press, 2017: 2-6.
[2]徐滨士. 工程机械再制造及其关键技术[J]. 工程机械, 2009, 40(8): 1-6.
XU Binshi. Key Technology of Remanufacture for Engineering Machinery[J]. Construction Machinery and Equipment, 2009, 40(8): 1-6.
[3]刘子武, 贾秀杰, 李方义. 内燃机及其零部件再制造关键技术[J]. 内燃机与配件, 2015(10): 33-36.
LIU Ziwu, JIA Xiujie, LI Fangyi. Key Technology for Internal Combustion Engine and Its Components[J]. Internal Combustion Engine & Parts, 2015(10): 33-36.
[4]朱胜. 柔性增材再制造技术[J]. 机械工程学报, 2013, 49(23): 1-5.
ZHU Sheng. Additive Mobile Additive Remanufacturing[J]. Journal of Mechanical Engineering, 2013, 49(23): 1-5.
[5]TIAN Haoliang, WEI Shicheng, CHEN Yongxiong, et al. Research and Design of Composite Coatings Applied in Remanufacturing Crankshaft by High Velocity Arc Spraying[J]. Materials Science & Technology, 2013, 21(5): 51-56.
[6]HOU Xueqin, LI Ying, JIANG Tao. Fracture Failure Analysis of Ductile Cast Iron Crankshaft in a Vehicle Engine[J]. Journal of Failure Analysis & Prevention, 2011, 11(1): 10-16.
[7]封慧, 李剑峰, 孙杰. 曲轴轴颈损伤表面的激光熔覆再制造修复[J]. 中国激光, 2014, 41(8): 80-85.
FENG Hui, LI Jianfeng, SUN Jie. Study on Remanufacturing Repair of Damaged Crank Shaft Journal Surface by Laser Cladding[J]. Chinese Journal of Lasers, 2014, 41(8): 80-85.
[8]袁振玉. 高压油泵凸轮轴激光熔覆高硬度耐磨涂层工艺研究[D]. 长春：长春理工大学, 2014.
YUAN Zhenyu. Study on High Pressure Pump Camshaft Laser Cladding High Hardness Wear-resistant Coating Process[D]. Changchun: Changchun University of Science and Technology, 2014.
[9]LI Yongjian, DONG Shiyun, YAN Shixing, et al. Surface Remanufacturing of Ductile Cast Iron by Laser Cladding Ni-Cu Alloy Coatings[J]. Surface & Coatings Technology, 2018, 347: 20-28.
[10]LIU Zhichao, JIANG Qiuhong, LI Tao, et al. Environmental Benefits of Remanufacturing: a Case Study of Cylinder Heads Remanufactured through Laser Cladding[J]. Journal of Cleaner Production, 2016, 133: 1027-1033.
[11]张广, 孙杰, 李燕乐. 曲轴激光熔覆微观组织及力学特性分析[J]. 应用激光, 2017(6): 772-778.
ZHANG Guang, SUN Jie, LI Yanle. Analysis of Microstructure and Mechanical Properties of Crankshaft Repaired by Laser Cladding[J]. Applied Laser, 2017(6): 772-778.
[12]XIANG Chunhou, DONG Du, KAI Mingwang, et al. Microstructure and Wear Resistance of Fe-Cr-Mo-Co-C-B Amorphous Composite Coatings Synthesized by Laser Cladding[J]. Metal， 2018, 8： 622.
[13]WEN Ziqing, DONG Gang, ZHANG Qunli, et al. Effect of Annealing on Microstructure and Properties of FeCrNiCoMn High-entropy Alloy Coating Prepared by Laser Cladding[J]. Chinese Journal of Lasers, 2014, 41(3): 65-70.
[14]WANG H M, YU Y L, LI S Q. Microstructure and Tribological Properties of Laser Clad CaF2/Al2O3, Self-lubrication Wear-resistant Ceramic Matrix Composite Coatings[J]. Applied Laser, 2002, 47(1): 57-61.
[15]RIVEIRO A, MEJAS A, LUSQUIOS F, et al. Optimization of Laser Cladding for Al Coating Production [J]. Physics Procedia, 2013, 41(7): 327-334.
[16]ZHANG Kai, WANG Shijie, LIU Weijun, et al. Effects of Substrate Preheating on the Thin-wall Part Built by Laser Metal Deposition Shaping[J]. Applied Surface Science, 2014, 317: 839-855.
[17]KHLER H, RAJPUT R, KHAZAN P, et al. On the Influence of Laser Cladding and Post-processing Strategies on Residual Stresses in Steel Specimens[J]. Physics Procedia, 2014, 56: 250-261.
[18]郭晓霞. 几种常用表面强化技术的比较[J]. 现代制造工程, 2008(3): 84-87.
GUO Xiaoxia. The Comparision of Several Surface Hardening Used Usually[J]. Modern Manufacturing Engineering, 2008(3): 84-87.
[19]鹿海洋. 冷焊技术在发动机机体再制造中的应用研究[D]. 济南：山东大学, 2011.
LU Haiyang. Research on the Application of Cold Welding Technology in Engine Block Remanufacturing[D]. Jinan: Shandong University, 2011.
[20]徐庆钟, 李方义, 秦顺顺, 等. 冷焊工艺参数对HT250表面修复层性能的影响[J]. 机械工程学报, 2013, 49(7): 101-105.
XU Qingzhong, LI Fangyi, QIN Shunshun, et al. Effect of Cold-welding Parameters on Properties of HT250 Surface Repaired Layer[J]. Journal of Mechanical Engineering, 2013, 49(7): 101-105.
[21]XU Qingzhong, LI Fangyi, DING Tao, et al. Experimental Study on Application of Cold-welding Technology in Engine Remanufacturing Field[J]. Advanced Materials Research, 2012, 482/484: 2051-2054.
[22]赵运才, 杨雷雷, 刘宗阳,等. 再制造HT250基体的亚激光瞬间熔技术工艺参数优化[J]. 中国表面工程, 2015, 28(4): 127-133.
ZHAO Yuncai, YANG Leilei, LIU Zongyang, et al. Process Parameter Optimization of Remanufactured HT250 Matrix by Sub Moments of Laser Cladding Technology[J]. China Surface Engineering, 2015, 28(4): 127-133.
[23]孙晓峰, 李占明, 宋巍. 类激光堆焊修复柴油发动机肩胛密封面[J]. 中国表面工程, 2015, 28(1): 115-121.
SUN Xiaofeng, LI Zhanming, SONG Wei. Repairing of Cylinder Scapular Sealing Surface of Diesel Engine by Like-laser Welding Technology[J]. China Surface Engineering, 2015, 28(1): 115-121.
[24]郭连兔, 马振华, 周圣兵, 等. MAG冷焊及其在轴失重型失效修复中的应用研究[J]. 中国修船, 2012, 25(1): 10-12.
GUO Liantu, MA Zhenhua, ZHOU Shengbing, et al. The Application of MAG Cold Welding Technology in Shaft Failure [J]. China Ship Repair, 2012, 25(1): 10-12.
[25]陈硇生, 周圣兵, 王立军. 某船主柴油机气阀座孔冷焊修复研究[J]. 中国修船, 2013, 26(6): 21-23.
CHEN Lvsheng, ZHOU Shengbing, WANG Lijun. The Research of Cold Welding Repair in Diesel Engine Valve Seat Hole[J]. China Ship Repair, 2013, 26(6): 21-23.
[26]王海军. 热喷涂工程师指南[M]. 北京: 国防工业出版社, 2010: 162-164.
WANG Haijun. Thermal Spraying Engineer's Guide[M]. Beijing: National Defense Industry Press, 2010: 162-164.
[27]徐海峰. 机车气缸套等离子喷涂再制造涂层的制备及摩擦磨损性能的研究[D]. 扬州: 扬州大学, 2017.
XU Haifeng. Research on Wear Properties of Plasma Sprayed Remanufacturing Coating for Locomotive Cylinder Liner[D]. Yangzhou: Yangzhou University, 2017.
[28]UOZATO S, NAKATA K, USHIO M. Evaluation of Ferrous Powder Thermal Spray Coatings on Diesel Engine Cylinder Bores[J]. Surface & Coatings Technology, 2005, 200(7): 2580-2586.
[29]李福村, 孙宏飞, 燕友增, 等. 表面喷涂技术在内燃机缸套上的应用[J]. 现代制造技术与装备, 2011(1): 25-26.
LI Fucun, SUN Hongfei, YAN Youzeng, et al. Application of Surface Spraying Technology in Cylinder Liner of Internal Combustion Engine[J]. Modern Manufacturing Technology and Equipment, 2011(1): 25-26.
[30]曹华军, 童少飞, 陈海峰,等. 基于热喷涂的轴类零件再制造工艺及其残余应力分析[J]. 中国机械工程, 2014, 25(24): 3368-3372.
CAO Huajun, TONG Shaofei, CHEN Haifeng, et al. Analysis of Remanufacturing Process and Residual Stress of Axis Based on Thermal Spraying [J]. China Mechanical Engineering, 2014, 25(24): 3368-3372.
[31]KROMER R, VERDY C, COSTIL S, et al. Laser Surface Texturing to Enhance Adhesion Bond Strength of Spray Coatings-cold Spraying, Wire-arc Spraying, and Atmospheric Plasma Spraying[J]. Surface & Coatings Technology, 2017, 352： 642-653.
[32]SUN Ze, ZHANG Donghui, YAN Baoxu, et al. Effects of Laser Remelting on Microstructures and Immersion Corrosion Performance of Arc Sprayed Al Coating in 3.5% NaCl Solution[J]. Optics & Laser Technology, 2018, 99： 282-290.
[33]KITAMURA J, USUBA S, KAKUDATE Y, et al. Boron Carbide Coating by Electromagnetically Accelerated Plasma Spraying[J]. Journal of Thermal Spray Technology, 2003, 12(1): 70-76.
[34]LI Yujie, LIANG Tianquan, AO Run, et al. Oxidation Resistance of Iron-based Coatings by Supersonic Arc Spraying at High Temperature[J]. Surface & Coatings Technology, 2018, 347: 99-112.
[35]陈永雄, 魏世丞, 梁秀兵, 等. 铝合金发动机缸盖的再制造技术研究[J]. 材料工程, 2012(6): 16-20.
CHEN Yongxiong, WEI Shicheng, LIANG Xiubing, et al. Research on Remanufacturing Process of a Typical Aluminum Alloy Engine Cylinder Head[J]. Journal of Materials Engineering, 2012(6): 16-20.
[36]王波, 刘伯玉, 王庭俊. 柴油机缸套的电弧喷涂涂层与耐磨性能研究[J]. 热加工工艺, 2018(6): 169-172.
WANG Bo, LIU Boyu, WANG Tingjun. Research on Arc Spraying Coating and Wear Resistance of Cylinder Liner of Diesel Engine[J]. Hot Working Technology, 2018(6): 169-172.
[37]曾志龙, 丁彰雄, 赵辉. 大型船舶柴油机气缸套再制造中涂层设计及性能研究[J]. 热喷涂技术, 2010, 2(1):42-48.
ZENG Zhilong, DING Zhangxiong, ZHAO Hui. Research on Design and Properties of Coating in Cylinder Liner Remanufacturing of the Large Marine Diesel Engine[J]. Thermal Spray Technology, 2010, 2(1):42-48.
[38]徐亮, 权东. 6300型柴油机气缸套再制造技术研究[J]. 南通航运职业技术学院学报, 2011, 10(1): 44-47.
XU Liang, QUAN Dong. Research on Remanufacturing Technology of Cylinder Liner of 6300 Diesel Engine[J]. Journal of Nantong Vocational & Technical Shipping College, 2011, 10(1): 44-47.
[39]BAI Jinyuan, CHEN Yongxiong, CHENG Jiangbo, et al. An Automatic High Velocity Arc Spraying System[J]. Key Engineering Materials, 2008, 373/374: 89-92.
[40]CHENG Jiangbo, LIU Dan, LIANG Xiubing, et al. Wear Behaviors of Arc-Sprayed FeBSiNb Amorphous Coatings[J]. Tribology Letters, 2015, 60(2): 22.
[41]田浩亮, 王长亮, 郭孟秋, 等. 发动机曲轴高速电弧喷涂再制造工艺及热控制[J]. 金属热处理, 2017, 42(12): 117-121.
TIAN Haoliang, WANG Changliang, GUO Mengqiu, et al. High Velocity Arc Spraying Remanufacture Process and Thermal Control for Engine Crankshaft[J]. Heat Treatment of Metals, 2017, 42(12): 117-121.
[42]白金元, 徐滨士, 梁秀兵, 等. 自动化电弧喷涂1Cr18Ni9Ti-Al复合涂层在废旧发动机缸体再制造中的应用[J]. 中国表面工程, 2007, 20(6): 40-43.
BAI Jinyuan, XU Binshi, LIANG Xiubing, et al. Application of Automatic Arc Spraying Composite Coating of 1Cr18Ni9Ti-Al to Remanufacture of Worn Cylinder Body of Engine[J]. China Surface Engineering, 2007, 20(6): 40-43.
[43]满佳, 张松, 丁韬, 等. 自动化脉冲流镀设备及其应用[J]. 电镀与涂饰, 2014, 33(17):737-740.
MAN Jia, ZHANG Song, DING Tao， et al. Automatic Pulse Flow Plating Machine and Its Application[J]. Electroplating&Finishing, 2014, 33(17):737-740.
[44]胡振峰, 汪笑鹤, 吕镖, 等. 自动化电刷镀技术在发动机缸体再制造中的应用[J]. 中国表面工程, 2012，25(4): 27-30.
HU Zhenfeng, WANG Xiaohe, LYU Biao, et al. Automatic Brush Electroplating Technology Applied to Remanufacturing Cylinder Body of Engine[J]. China Surface Engineering, 2012,25(4): 27-30.
[45]胡振峰, 汪笑鹤, 吕镖,等. 电流密度对自动化电刷镀Ni镀层组织结构和性能的影响[J]. 功能材料, 2013, 44(17): 2507-2510.
HU Zhenfeng, WANG Xiaohe, LYU Biao, et al. Effect of Current Density on Microstructure and Properties of Automatic Brush Electroplated Nickel[J]. Journal of Functional Materials, 2013, 44(17): 2507-2510.
[46]陈琪云. 发动机连杆轴承座内孔的电沉积修复技术[J]. 材料保护, 2016, 49(9): 51-54.
CHEN Qiyun. Electro Deposition Repair Technology for Inner Hole of Engine Connecting Rod Bearing Seat[J]. Materials Protection, 2016, 49(9): 51-54.
[47]ZHANG Jianxin, WANG Zhongmin. Development of Electric Brush-plating Machine Tool Based on Inverter [J]. Manufacturing Technology & Machine Tool, 2008, 174: 890-894.
[48]WU Bin, XU Binshi, ZHANG Bin, et al. Automatic Brush Plating: an Update on Brush Plating[J]. Materials Letters, 2006, 60(13/14): 1673-1677.
[49]李小兵, 童贤靓, 杨仁贤,等. 电刷镀Ni-CNTs/PTFE纳米复合镀层的摩擦磨损与耐腐蚀性能[J]. 材料导报, 2017, 31(6): 66-71.
LI Xiaobing, TONG Xianliang, YANG Renxian, et al. Friction-wear and Corrosion Resistance of Brush Plated Ni-CNTs/PTFE Nano-composite Coatings[J]. Materials Review, 2017, 31(6): 66-71.
[50]WANG Xiaohe, BIAO Lv, HU Zhenfeng, et al. Effects of n-Al2O3 Particles Content on Structure and Performance of Electro-brush Plating Ni-Co Alloy Composite Coatings[J]. Rare Metal Materials & Engineering, 2016, 45(1): 36-41.
[51]海源, 张松, 李剑峰, 等. 自动脉冲刷镀工艺参数对镍-氧化铝复合镀层残余应力的影响[J]. 电镀与涂饰, 2015, 34(19): 1088-1092.
HAI Yuan, ZHANG Song, LI Jianfeng, et al. Effects of Process Parameters of Automatic Pulse Brush Plating on Residusal Stress of Nickel-alumina Composite Coating[J]. Electroplating & Finishing, 2015, 34(19): 1088-1092.
[52]王玉琳, 沈晔超, 宋守许. 面向汽车驱动桥壳半轴套管再制造的电刷镀技术研究[J]. 组合机床与自动化加工技术, 2013(2): 42-46.
WANG Yulin, SHEN Yechao, SONG Shouxu. Brush Plating Technology for Remanufacture of the Half Shaft Bushing of Vehicle’s Drive Axle Housing[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2013(2): 42-46.
[53]阎军, 刘勇, 杨术亮, 等. 合金镀铁技术在内燃机曲轴再制造的应用[J]. 内燃机与配件, 2015(5): 22-25.
YAN Jun, LIU Yong, YANG Shuliang, et al. The Application of Alloy Iron-plating in Internal Combustion Engine Crankshaft[J]. Internal Combustion Engine & Parts, 2015(5): 22-25.
[54]董文仲, 阎军, 贾珊中, 等. 合金镀铁层的结合和强化机理研究[J]. 中国表面工程, 2011, 24(1): 1-5.
DONG Wenzhong, YAN Jun, JIA Shanzhong, et al. Research on the Bonding and Strengthening Mechanism of Iron-based Alloy Plated Layers[J]. China Surface Engineering, 2011, 24(1): 1-5.
[55]李广民. 氩弧焊在铝合金气缸盖腐蚀修复工艺中的应用研究[D]. 长春: 吉林农业大学, 2017.
LI Guangmin. Application of TIG Welding in Corrosion Repairing Processof Aluminum Alloy Cylinder Head[D]. Changchun: Jilin Agricultural University, 2017.
[56]郭斌. 基于金属弧焊增材再制造系统的设计与工艺软件研发[D]. 武汉: 华中科技大学, 2016.
GUO Bin. Metal Arc Welding Additive Remanufacturing System Design and Software Development [D]. Wuhan: Huazhong University of Science and Technology, 2016.
[57]陈利修, 陈铭. 冷喷涂Cu-Zn-Al2O3修复斯太尔发动机水道腐蚀区域的涂层性能分析[J]. 机械设计与研究, 2013, 29(1): 69-74.
CHEN Lixiu, CHEN Ming. The Coating Performance of Cold Spraying Cu-Zn-Al2O3 for Repairing the Waterway Corrosion Area of Steyr Engine[J]. Machine Design & Research, 2013, 29(1): 69-74.
[58]王璐璐. 基于轴类部件磨损修复的冷喷涂涂层制备及性能研究[D]. 厦门: 集美大学, 2015.
WANG Lulu. Preparation and Study on Cold Spraying Coating Based on Shaft Parts Repair[D]. Xiamen: Jimei University, 2015.
[59]曹勇, 朱胜, 李萍, 等. 备件增材再制造成形中的颠覆性技术应用分析[J]. 装甲兵工程学院学报, 2015,29(2): 97-101.
CAO Yong, ZHU Sheng, LI Ping,et al. Application Analysis of Disruptive Technologies Based on Additive Remanufacture Forming for Spare Parts Support[J]. Journal of Academy of Armored Force Engineering, 2015,29(2): 97-101.