Dynamic Simulation of Winding Procedure for CICC Coils

China Mechanical Engineering ›› 2010, Vol. 21 ›› Issue (18): 2251-2254.

Previous Articles Next Articles

Dynamic Simulation of Winding Procedure for CICC Coils

Liu Jiangbo;Wu Jiefeng;Wen Jun;Wen Wei

Institute of Plasma Physics,Chinese Academy of Sciences,Hefei,230031

Online:2010-09-25 Published:2010-09-28
Supported by:

National Program on Key Basic Research Project (973 Program)（No. 2007ID205）
National Science and Technology ITER Project ( No. 2008GB101000)

管内电缆导体线圈滚弯成形的动态仿真

刘江波;吴杰峰;文军;文伟

中国科学院等离子体物理研究所,合肥,230031

基金资助:
国家重点基础研究发展计划(973计划)资助项目(2007ID205)；国家科技计划ITER计划专项(2008GB101000)
National Program on Key Basic Research Project (973 Program)（No. 2007ID205）
National Science and Technology ITER Project ( No. 2008GB101000)

Abstract

Abstract:

The analysis of conditions demanded for roll forming method of CICC superconducting coils was made. Based on the analysis, a model of the relationship between the cable feedrate and the rotation speed, angel of the winding former was established, which adapted to the roll forming procedure for varieties of CICC superconducting coils. Subsequently, a dynamic simulation method based on MATLAB was proposed, which was more effective for understanding the winding procedure.Finally, the analysis and dynamic simulation of the ITER(international thermonuclear experimental reactor) bottom/top correction coils was completed, and the conclusions offer some significant directions for the accurate automation of the winding procedure.

Key words: CICC(cable-in-conduit conductor), roll forming, modeling, MATLAB, dynamic simulation

摘要：

分析了管内电缆导体超导线圈滚弯成形所需要的条件,建立了适应于各种管内电缆导体超导线圈滚弯成形过程中导体进给速度与绕线模回转速度、角速度之间关系的数学模型。在此基础上提出了基于MATLAB的滚弯成形过程的动态仿真方法。完成了对国际热核聚变实验堆ITER底/顶部矫正场线圈绕制成形过程的分析和动态仿真。

关键词:

管内电缆导体, 滚弯成形, 建模, MATLAB, 动态仿真

CLC Number:

LIU Jiang-Bei, TUN Jie-Feng, WEN Jun, WEN Wei.

Dynamic Simulation of Winding Procedure for CICC Coils

[J]. China Mechanical Engineering, 2010, 21(18): 2251-2254.

刘江波, 吴杰峰, 文军, 文伟.

管内电缆导体线圈滚弯成形的动态仿真

[J]. 中国机械工程, 2010, 21(18): 2251-2254.

[1]	WANG Li-Cun, CHEN Jin, ZHANG Xian-Meng, CHEN Guo-Jiang. Study on Geometry Theory of Variable Wall Thickness Scroll Profiles and Shape Optimization Based on Functional Theory [J]. J4, 201016, 21(16): 1898-1901.
[2]	PENG Caihua, LI Jianhua, REN Lina, JIA Shilin. Nonlinear Degradation Modeling and Online Prediction of Remaining Life for Equipment with Measurement Errors [J]. China Mechanical Engineering, 2026, 37(1): 147-161.
[3]	YANG Mingxing, SHEN Jiale, GAO Peng, ZHANG Xing, WANG Junxiang. Design of Continuum Robots and Compensation Strategies for Losses of Guide Paths [J]. China Mechanical Engineering, 2025, 36(12): 2820-2828.
[4]	DAI Xin, LIU Huanlao, WANG Yulin, LI Xiang. A Key Geometric Error Identification Method for CNC Machine Tools Based on Machining Trajectory Sensitivity Indicators [J]. China Mechanical Engineering, 2025, 36(12): 2862-2869.
[5]	NI Tao, ZHAO Yahui, ZHAO Zeren, YANG Kaiqiang. Dynamics Modeling and Base Dynamics Parameter Determination of 6-UPRU Parallel Manipulators [J]. China Mechanical Engineering, 2025, 36(12): 2911-2919.
[6]	Zhaoyi LU, Hongzi FEI, Hu YU, Guihou ZHOU, Depeng ZENG, Wanyou LI. Inversion Method-based Equivalent Modeling of Stators in Permanent Magnet Motors [J]. China Mechanical Engineering, 2025, 36(11): 2486-2491.
[7]	Xinyou LIN, Zhongwei JIN, Yunliang TANG. Vehicle Lateral Control Strategy Integrating Road Curvature Feedforward [J]. China Mechanical Engineering, 2025, 36(11): 2774-2782.
[8]	Changhong GUO, Mengran DI, Hanwen GONG, Lingxiao QUAN, Bin LI. Modeling of Aviation Fuel Pipe Welds in Different Regions and Its Effect on Mechanics Properties of Pipes [J]. China Mechanical Engineering, 2025, 36(09): 1916-1924.
[9]	Hongwei XU, Wenbin YE, Shunyao MA, Hang ZHANG. Research on Color Matching Calibration Algorithm for FDM Full Color 3D Presses [J]. China Mechanical Engineering, 2025, 36(09): 2081-2086.
[10]	Hao LI, Xinrong LIU, Yiqin LIU, Diqing FAN. Research on Passive Compliance Control Method of High Altitude Wind Turbine Blade Grinding Robots Based on Improved ADRC [J]. China Mechanical Engineering, 2025, 36(08): 1832-1841.
[11]	GU Sunquan, ZHANG Haizhu, LI Rong, RAO BaWANG Hao. Quantitative Analysis of Correlation for Complex Product Design Indicator Decomposition Based on Lotka-Volterra Model [J]. China Mechanical Engineering, 2025, 36(07): 1479-1486.
[12]	GUO Feiyan1, ZHANG Hui2, SONG Changjie1, ZHANG Shuo1. Identification and Evaluation of Key Error Elements in Complex Composite Aviation Componts Assembly Driven by Mechanism and Data Model Fusion [J]. China Mechanical Engineering, 2025, 36(07): 1530-1543.
[13]	. Geometric Feature Modeling and Assembly Interference Detection Method for Large Ship Components [J]. China Mechanical Engineering, 2025, 36(07): 1636-1649.
[14]	GUAN Jiaoyue1, GAO Yuan1, AI Yanting1, TIAN Jing1, YAO Yudong2. Thread Extension Stress Analysis of Bolts under Pre-tensioning Conditions [J]. China Mechanical Engineering, 2025, 36(05): 923-932.
[15]	DU Bing1, 2, LI Yang1, 2, LIU Fenghua1, 2, DONG Mingxin1, 2, WAN Yufan1, 2, ZHONG Qingshuai1, 2. Establishment and Influences of Critical Wrinkling Criterion of Sheet Metals Considering Thickness Stress [J]. China Mechanical Engineering, 2025, 36(05): 1074-1082.

Dynamic Simulation of Winding Procedure for CICC Coils

管内电缆导体线圈滚弯成形的动态仿真

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics