Forward Kinematics Analysis of 2UPS-2RPS Parallel Mechanism Based on Single-opened-chain 

Abstract

Abstract:

A new method of velocity and acceleration analysis for 2UPS-2RPS parallel mechanism based on single-opened-chain was presented.The mathematical models of velocity and acceleration analyses,which
were uniform with one of the position analysis,were established according to the topological structure characteristics and the same course of topological structure decomposition.The velocity and acceleration equations of the mechanism were derived.An numerical example of the velocity and acceleration analysis was given.

Key words: parallel mechanism, forward kinematics analysis, single-opened-chain, topology

摘要：

基于序单开链法对具有不同支路结构的2UPS-2RPS少自由度并联机构进行了正运动学速度和加速度分析。依据机构的拓扑结构特征，采用相同的序单开链分解线路，建立了与机构位置分析模型相统一的机构速度和加速度分析模型，得到了维数最低且恰等于机构耦合度的机构速度和加速度方程，给出了其速度和加速度分析的数值算例。

关键词: 并联机构, 正运动分析, 单开链, 拓扑结构

CLC Number:

TH112

Feng Zhiyou, Zhang Ce, Yang Tingli. Forward Kinematics Analysis of 2UPS-2RPS Parallel Mechanism Based on Single-opened-chain [J]. China Mechanical Engineering, 2008, 19(24): 2986-2990.

冯志友, 张策, 杨廷力, . 2UPS-2RPS机构正运动学分析的序单开链法[J]. 中国机械工程, 2008, 19(24): 2986-2990.

[1]	LI Meng-Lei, GU Yo-Qin, ZHANG Hua-Liang, LIU Li-Qin, DU Juan, WEN Chu-Hua, LAN Guo-Sheng. Parallel Mechanism Structure Optimization Design Based on Multi-objective Differential Evolution Algorithm [J]. J4, 201016, 21(16): 1915-1920.
[2]	LU Kai-Jiang, SHI Dun-Beng, ZHANG Feng-Chao. Dynamics Optimization Design of Planar 3-DOF Parallel Mechanism [J]. J4, 201016, 21(16): 1926-1931.
[3]	ZHU Xiao, SHEN Huiping, LI Ju, LI Tao, YE Pengda, ZHU Wei. Topological Design and Performance Analysis of 3-DOF Parallel Mechanisms with Alternately Used Moving Platforms [J]. China Mechanical Engineering, 2026, 37(1): 114-125.
[4]	WANG Hao, LUO Haodong, SHI Yazhong, WANG Liwen, ZHANG Wei, WANG Zhong. A Topology Optimization Method Based on End-to-end Deep Learning Framework TOPO-U-Net [J]. China Mechanical Engineering, 2026, 37(1): 174-183.
[5]	HE Kun, ZHOU Hechao, ZHANG Jimin. Design of Negative Poisson's Ratio Metamaterial Filling Structures for Train Anti-climb Energy Absorbers [J]. China Mechanical Engineering, 2025, 36(12): 3040-3046.
[6]	Ningning HUANG, Jingjing YOU, Pengda YE, Huiping SHEN, Chenggang LI, Hongtao WU. Forward Kinematics and Singularity of Kinematically Decoupled Stewart-type Parallel Mechanisms [J]. China Mechanical Engineering, 2025, 36(09): 1951-1960.
[7]	Ju LI, Yue GUO, Huiping SHEN, Qinmei MENG, Xiaoyang GU. Optimization Principle and General Method for Multiple Topology Decoupling of Parallel Mechanisms [J]. China Mechanical Engineering, 2025, 36(08): 1700-1712.
[8]	Xingyu ZHAO, Tieshi ZHAO, Bo XU, Xiangquan LIU, Yufei QIN. Kinematics and Transmission Performance Analyses of Parallel Hybrid Drive Mechanisms [J]. China Mechanical Engineering, 2025, 36(08): 1728-1739.
[9]	HUANG Hao1, WANG Zeng2, LI Bo2, LU Zehua1, LIU Huaiju1. Structure-thermal Compliance Collaborative Topology Optimization of Aero-engine Gears Transmission Case Based on Compromise Programming Method [J]. China Mechanical Engineering, 2025, 36(07): 1471-1478.
[10]	SU Ke1, WANG Ying1, LIANG Tengteng1, WEI Yili2, ZHANG Nannan2. Topology Optimization of Single Material Flexible Mechanisms Based on Informed Tectonics Theory [J]. China Mechanical Engineering, 2025, 36(04): 873-881.
[11]	LIN Jiahui, LI Zhuangzhuang, LI Xuelin, LI Jun. A New Method for Path-engulfment Topology Optimization [J]. China Mechanical Engineering, 2025, 36(03): 504-514.
[12]	WANG Shuting1, XIE Qingtian1, YANG Aodi1, LI Xiaobing2, XIONG Tifan1, XIE Xianda2. Research on Non-homogeneous Boundary Condition Imposing Techniques for Isogeometric Topology Optimization [J]. China Mechanical Engineering, 2025, 36(03): 525-535.
[13]	LIU Min1, 2, LU Feiyang1, ZHAN Jinqing1, 2, WU Jian1, ZHU Benliang3. Topology Optimization of Compliant Mechanisms with Embedded MovablePiezoelectric Actuator Considering Minimum Length Constraints [J]. China Mechanical Engineering, 2025, 36(02): 255-264.
[14]	WANG Hao1, 2, WANG Jiangbei3, LUO Haodong3, WANG Liwen4. An Adaptive Design Domain Topology Optimization Method Based on Improved Quadtree and SBFEM [J]. China Mechanical Engineering, 2024, 35(05): 904-915,927.
[15]	YANG Feng, LUO Shijie, YANG Jianghong, WANG Yingjun, . A GPU-accelerated High-efficient Multi-grid Algorithm for ITO [J]. China Mechanical Engineering, 2024, 35(04): 602-613.

Forward Kinematics Analysis of 2UPS-2RPS Parallel Mechanism Based on Single-opened-chain 

2UPS-2RPS机构正运动学分析的序单开链法

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics