Intrinsic Dissipation in Low Cycle Fatigue for Stainless Steel Weldments

doi:10.3969/j.issn.1004-132X.2020.17.005

Abstract

Abstract: DIC and infrared thermography(IRT) were used to measure the deformation and surface temperature fields during low cycle fatigue of 310S with welded joints. DIC was used to observe the nonuniformity of local deformations of the welded joints. IRT provided the temperature field distribution of sample surfaces. The test results show that in high stress areas, fatigue failure occurs mostly in the welded joints; in the low stress areas, fatigue failure occurs mostly in base metal areas. The intrinsic dissipation distribution of specimen surfaces may be acquired by solving the local thermal diffusion equation, which may be used to predict the crack initiation positions.

Key words: stainless steel, welded joint, fatigue, dissipation, digital image correlation(DIC)

摘要：

采用数字图像相关(DIC)技术和红外热成像技术测量了310S不锈钢焊接接头低周疲劳过程中的变形和表面温度场，其中，DIC技术用于观察焊接接头局部变形的不均匀性，红外热成像技术提供样品表面的温度场分布。结果表明：在高应力区域，疲劳失效主要发生在焊接接头处；在低应力区域，疲劳失效主要发生在母材区。通过求解局部热扩散方程计算获得的试件表面的固有耗散分布可用于预测裂纹萌生位置。

关键词: 不锈钢, 焊接接头, 疲劳, 耗散, 数字图像相关

CLC Number:

O346.2

HAO Zhiyan;HUANG Zhiyong;WANG Qingyuan. Intrinsic Dissipation in Low Cycle Fatigue for Stainless Steel Weldments[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.17.005.

郝智彦;黄志勇;王清远. 不锈钢焊接件低周疲劳固有耗散分析[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.17.005.

References

[1]寇宏滨，邱荣英，朱剑峰. 轿车用薄板焊接结构疲劳性能研究[J]. 中国机械工程, 2014，25(15)： 2107-2111.
KOU Hongbin，QIU Rongying，ZHU Jianfeng. Study on Fatigue Property of Auto Seam Welded Thin-sheet Structures[J]. China Mechanical Engineering，2014, 25(15)：2107-2111.
[2]GENG C J，WU B L，DU X H，et al. Low Cycle Fatigue Behavior of Extruded AZ31B Magnesium Alloy[J]. Transactions of Nonferrous Metals Society of China，2013，23(6)：1589-1594.
[3]CHRYSOCHOOS A，BOULANGER T，MORABITO A E. Dissipation and Thermoelastic Coupling Associated with Fatigue of Materials[M]//FRMOND M, MACERI F. Mechanics，Models and Methods in Civil Engineering. Berlin: Springer，2012：147-156.
[4]MENEGHETTI G. Analysis of the Fatigue Strength of a Stainless Steel Based on the Energy Dissipation[J]. International Journal of Fatigue，2007，29(1)：81-94.
[5]李源，韩旭，刘杰，等. 一种基于耗散能计算的高周疲劳参数预测方法[J]. 力学学报，2013，45(3)：367-374.
LI Yuan，HAN Xu，LIU Jie，et al. A Prediction Method on High-cycle Fatigue Parameters Based on Dissipated Energy Computation[J]. Chinese Journal of Theoretical and Applied Mechanics，2013，45(3)：367-374.
[6]WANG H，JING H，ZHAO L，et al. Uniaxial Ratcheting Behaviour of 304L Stainless Steel and ER308L Weld Joints[J]. Materials Science and Engineering: A，2017，708：21-42.
[7]YUAN X，YU W，FU S，et al. Effect of Mean Stress and Ratcheting Strain on the Low Cycle Fatigue Behavior of a Wrought 316LN Stainless Steel[J]. Materials Science and Engineering: A，2016，677：193-202.
[8]DAS A. Cyclic Plasticity Induced Transformation of Austenitic Stainless Steels[J]. Materials Characterization，2019，149：1-25.
[9]MENEGHETTI G. Analysis of the Fatigue Strength of a Stainless Steel Based on the Energy Dissipation[J]. International Journal of Fatigue，2007，29(1)：81-94.
[10]HUANG Z Y，LIU H Q，WANG C，et al. Fatigue Life Dispersion and Thermal Dissipation Investigations for Titanium Alloy TC17 in Very High Cycle Regime[J]. Fatigue & Fracture of Engineering Materials & Structures，2015，38(11)：1285-1293.
[11]HUANG Z Y，WANG Q Y，WAGNER D，et al. A Very High Cycle Fatigue Thermal Dissipation Investigation for Titanium Alloy TC4[J]. Materials Science and Engineering: A，2014，600：153-158.
[12]GUO Q，GUO X. Research on High-cycle Fatigue Behavior of FV520B Stainless Steel Based on Intrinsic Dissipation[J]. Materials & Design，2015，90(4)：248-255.

[1]	TAO Yun-Ping, WANG Zhi-Yuan. Energy Dissipation of Bolt Joint under Cycle Load and Parameter Identification of Interfaces  [J]. J4, 201016, 21(16): 1941-1943,1951.
[2]	WANG Rong, LI Junjie, ZHENG Wenge, WANG Jia, HE Mingrong. Gear Fatigue Damage Prediction with Coupling Effect of Environmental Randomness and Load Sequence [J]. China Mechanical Engineering, 2026, 37(1): 105-113.
[3]	YU Changrui, LIU Liangbao, ZHOU Jinggang, ZHANG Han, HUANG Dong, ZHANG Ning, LI Xun. Optimization of Roller Burnishing Parameters for Concave Circular-arc Surfaces of Turbine Disk Mortise Grooves [J]. China Mechanical Engineering, 2026, 37(1): 60-65.
[4]	Lingyun YAO, Zhishun YANG, Li LI, Yongjie LIN. Research on Load Spectrum Editing Based on Optimal Pseudo Wigner-Ville Distribution Method [J]. China Mechanical Engineering, 2025, 36(11): 2501-2508.
[5]	Hongwei LIU, Renke KANG, Xianglong ZHU, Haotian MU, Fangzhou HE, Mo CHEN. Improvement of Fatigue Performances of AISI 4340 Steel Thread Root by Rolling Processes [J]. China Mechanical Engineering, 2025, 36(10): 2241-2248.
[6]	Xingyu WANG, Yanbao GUO, Zheng ZHANG, Zhangyu QIAO, Fa GAO, Jinzhong CHEN, Chang LIU. Research on Vibration Fatigue of Pipeline Inspection Gauge Sealing Discs under Influences of Pipeline Defects [J]. China Mechanical Engineering, 2025, 36(10): 2292-2299.
[7]	Huiming YANG, Xia YANG, Yuqi HUANG. Full-cycle Fatigue Life Prediction of Rolling Bearings Based on Paris Modeling [J]. China Mechanical Engineering, 2025, 36(09): 2003-2010.
[8]	Jinyu ZHOU, Yifei CHEN. Prediction of Fatigue Property of SLM Metal Parts Based on Multi-scale Simulations [J]. China Mechanical Engineering, 2025, 36(09): 2087-2096.
[9]	Sizhu ZHOU, Qiongyao XIANG, Yun ZENG. Fatigue Cumulative Damage Model Considering Dynamic Memory Properties of Materials [J]. China Mechanical Engineering, 2025, 36(08): 1740-1748.
[10]	Qingwang ZHU, Jing ZHANG, Faxiang XIE, Zhonggang ZHU, Jianyu GUO, Houlin YAN. Design and Experimental Research of RV Reducer Main Bearing Test Benches [J]. China Mechanical Engineering, 2025, 36(08): 1749-1756.
[11]	ZHANG Peng1, 3, 4, 5, ZHU Xuewei2, 3, 4, YU Baoyang1, 3, 4, WU Tianfeng1, 3, 4, ZHU Jinzhou1, 3, 4. Flow Behavior and Microstructure of 304 Stainless Steel Ultra-thin Strips in Microchannel Gas Forming [J]. China Mechanical Engineering, 2025, 36(07): 1416-1422.
[12]	JIANG Shijie1, 2, CAI Shanggang1, YING Hongwei1, CHEN Jiaqi1. Fatigue Property of 17-4PH Products Fabricated via Metal Material Extrusion Technique [J]. China Mechanical Engineering, 2025, 36(07): 1582-1591.
[13]	YANG Yu1, 2, LI Xiaolei2, TAO Yourui1, 2, GUO Qiyu1, 2, YE Nan1, 2. Accelerated Load Spectrum Preparation for RV Reducer Service Conditions [J]. China Mechanical Engineering, 2025, 36(06): 1170-1177.
[14]	NIU Yanzhao1, LIU Hongwei1, SONG Yali2, ZHU Xianglong1, HUANG Jiamei2, KANG Renke1. Optimization and Experimental Study of Bolt Retreat Groove Rolling Wheels Based on Finite Element Simulation [J]. China Mechanical Engineering, 2025, 36(06): 1214-1221.
[15]	TAN Liang1, 2, FAN Yi3, YAO Changfeng1, 2. Investigation on Evolution Laws for Surface States of TC17 Alloy Induced by UIT during High-cycle Fatigue at 400 ℃ [J]. China Mechanical Engineering, 2025, 36(04): 790-801.