Vibration Fatigue Life Prediction of Engineering Structures Based on DFR Method

Abstract

Abstract:

An equipment structure with foundry defects was studied herein to acquire the fatigue life based on the DFR method.The data employed in the method were obtained from a series of tests,which were basic mechanical properties,fatigue/crack propagation performance,mode/dynamic response performance,load spectrum of critical site,etc.It is proved that this method provides a reasonable and feasible approach to assess fatigue life of engineering structure under the broad band random vibration environment.

Key words: engineering structure, random vibration, fatigue, detail fatigue rating(DFR), simulation

摘要：

以某含铸造缺陷的设备结构为对象,通过样件的基本力学性能及疲劳/裂纹扩展性能测试、模态及动力响应测试、动力响应分析及危险部位载荷谱确定等工作，采用细节疲劳寿命额定值（DFR)方法获取了该批次缺陷件疲劳寿命。研究结果可为工作在振动环境下的工程结构疲劳寿命评定探索出一条合理可行的解决途径。


关键词: 工程结构, 随机振动, 疲劳, DFR, 仿真

CLC Number:

V215.55

YAN Yi-Feng, WANG Chang-Wu, CHANG Xing. Vibration Fatigue Life Prediction of Engineering Structures Based on DFR Method[J]. China Mechanical Engineering, 2013, 24(6): 760-764.

严一峰, 王长武, 常研. 基于DFR法的工程结构振动疲劳寿命评定[J]. 中国机械工程, 2013, 24(6): 760-764.

[1]	WANG Li-Cun, CHEN Jin, ZHANG Xian-Meng, CHEN Guo-Jiang. Study on Geometry Theory of Variable Wall Thickness Scroll Profiles and Shape Optimization Based on Functional Theory [J]. J4, 201016, 21(16): 1898-1901.
[2]	TUN Fu-Chao, TUN Bai-Hu, ZHANG Xiu-Hua. Numerical Simulation of Heat Transfer Performance of Paraffin Thermal-Sensitive Valve  [J]. J4, 201016, 21(16): 1921-1926.
[3]	DONG Guo-Jiang, DIAO Chang-Cai, CAO Miao-Yan, HAO Hai-Bin, YANG Dong-Feng. Study on Wall-thickness and Deformation Regularity of Cylinder Part Based on Solid Granules Medium Forming [J]. J4, 201016, 21(16): 1992-1998.
[4]	WANG Rong, LI Junjie, ZHENG Wenge, WANG Jia, HE Mingrong. Gear Fatigue Damage Prediction with Coupling Effect of Environmental Randomness and Load Sequence [J]. China Mechanical Engineering, 2026, 37(1): 105-113.
[5]	SHI Yansong, LU Fei, ZHOU Zhigang, BEN Xiaokang. Dynamic Performance of Finger Seals under Rotor Tilt Conditions [J]. China Mechanical Engineering, 2026, 37(1): 126-134.
[6]	WU Jianpeng, DING Ao, MA Biao, LI Heyan, WANG Liyong, YANG Chengbing. Failure Probability Analysis of Temperature Field in Wet Friction Components Based on Macro-Micro Frictional Contact Model [J]. China Mechanical Engineering, 2026, 37(1): 40-50.
[7]	YU Changrui, LIU Liangbao, ZHOU Jinggang, ZHANG Han, HUANG Dong, ZHANG Ning, LI Xun. Optimization of Roller Burnishing Parameters for Concave Circular-arc Surfaces of Turbine Disk Mortise Grooves [J]. China Mechanical Engineering, 2026, 37(1): 60-65.
[8]	FU Boyu, XU Zehua, LI Kangshuai, WANG Haoyu, HE Jiaqi, HE Qiang. Numerical Simulation and Experimental Analysis of Propeller Flow Fields and Motor Temperature Fields in High-altitude Environments for UAVs [J]. China Mechanical Engineering, 2025, 36(12): 2894-2902.
[9]	Lingyun YAO, Zhishun YANG, Li LI, Yongjie LIN. Research on Load Spectrum Editing Based on Optimal Pseudo Wigner-Ville Distribution Method [J]. China Mechanical Engineering, 2025, 36(11): 2501-2508.
[10]	Hongji YANG, Jie CHEN, Zhuoran LI, Yunhao ZHAO, Jing ZHAO. Design， Mechanical Characteristics Analysis， and Testing of a Flexible Wedge-Block Mechanism for Aircraft Hatch Connection [J]. China Mechanical Engineering, 2025, 36(11): 2670-2677.
[11]	Xiangchong GAO, Peijun LIU, Huanguo CHEN, Chengcheng PENG, Shujia SONG, Zijun LIN. Strain Extremum Characterization Method for Oil and Gas Pipelines under Oblique Reverse Faults [J]. China Mechanical Engineering, 2025, 36(11): 2801-2809.
[12]	Hongwei LIU, Renke KANG, Xianglong ZHU, Haotian MU, Fangzhou HE, Mo CHEN. Improvement of Fatigue Performances of AISI 4340 Steel Thread Root by Rolling Processes [J]. China Mechanical Engineering, 2025, 36(10): 2241-2248.
[13]	Xingyu WANG, Yanbao GUO, Zheng ZHANG, Zhangyu QIAO, Fa GAO, Jinzhong CHEN, Chang LIU. Research on Vibration Fatigue of Pipeline Inspection Gauge Sealing Discs under Influences of Pipeline Defects [J]. China Mechanical Engineering, 2025, 36(10): 2292-2299.
[14]	Jingjing CHEN, Sha CHEN, Haiyan ZHU, Junjun YUAN, Zeyu LUO. Mechanism Analysis of Material Remove and Subsurface Layer Damages for SiC during Nanocutting Processes [J]. China Mechanical Engineering, 2025, 36(10): 2312-2321.
[15]	Xinyao TANG, Rong YIN, Xupeng WANG, Jiayin YANG, Xiaoyi LIU, Yuyang HAO. Design and Optimization of Human-machine Compatibility of Knee-ankle Exoskeletons [J]. China Mechanical Engineering, 2025, 36(10): 2369-2378.

Vibration Fatigue Life Prediction of Engineering Structures Based on DFR Method

基于DFR法的工程结构振动疲劳寿命评定

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics