基于Kriging代理模型的结构损伤识别新方法

摘要/Abstract

摘要： 提出一种基于Kriging代理模型的损伤识别方法。利用初始样本建立结构响应与结构损伤参数之间的关系，代替原结构响应与结构物理参数之间的关系，有效减少损伤识别过程中反复调用有限元软件对结构进行网格划分和有限元计算的次数，提高了识别效率。采用加点准则对代理模型进行修正，保证代理模型可以准确反映结构响应与结构损伤参数之间的关系。通过一个管梁结构的数值算例验证了所提方法的有效性。最后，将该方法应用于某导弹发射台模型的损伤识别中，实验结果表明，该方法可应用于工程实际。

关键词: 损伤识别, Kriging代理模型, 大型复杂结构, 程度识别

Abstract: A new damage identification method was proposed based on Kriging surrogate model. The initial samples were used to construct the initial Kriging surrogate model to represent the relationship between the dynamic response and the structural damage parameters instead of that between the dynamic response and the structural physics parameters. Reducing the finite element mesh generation and the finite element calculation during the damage identification effectively, the efficiency of damage identification was improved. Updating the Kriging surrogate model by sampling criterion, making sure the Kriging surrogate model might exactly describe the relationship between the dynamic response and the structural damage parameters. A numerical example of a tube and grider structure was given to prove the effectiveness of the method. Finally, the method was used in damage identification of a missile launch platform model. The results show that the method is effective.

Key words: damage identification, Kriging surrogate model, large and complex structure, severity identification

中图分类号:

TU311

郭俊龙, 马立元, 李永军, 王天辉. 基于Kriging代理模型的结构损伤识别新方法[J]. 中国机械工程.

Guo Junlong, Ma Liyuan, Li Yongjun, Wang Tianhui. A New Structural Damage Identification Method Based on Kriging Surrogate Model[J]. China Mechanical Engineering.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://www.cmemo.org.cn/CN/

https://www.cmemo.org.cn/CN/Y2016/V27/I09/1198

参考文献

[1]钟儒勉，宗周红，秦中远，等. 基于多尺度模型修正的结合梁斜拉桥损伤识别方法[J]. 东南大学学报(自然科学版), 2014,44(2):350-356.

Zhong Rumian, Zong Zhouhong, Qin Zhongyuan，et al. Damage Identification Method of Composite Cable-stayed Bridge Based on Multi-scale Model Updating[J]. Journal of Southeast University(Natural Science Edition), 2014,44(2):350-356.

[2]Perera R, Fang S E, Huerta C. Structural Crack Detection without Updated Baseline Model by Single and Multiobjective Optimization[J]. Mechanical Systemsand Signal Processing, 2009,23(3):752-768.

[3]胡俊亮，颜全胜，郑恒斌，等. 基于Kriging模型的钢管混凝土连续梁拱桥有限元模型修正[J]. 振动与冲击.2014,33(14):33-39.

Hu Junliang, Yan Quansheng, Zheng Hengbin, et al. CFST Arch/continuous Beam Bridge FEM Model Updating Based on Kriging Model[J]. Journal of Vibration and Shock, 2014,33(14):33-39.

[4]向锦武, 周传荣, 张阿舟.基于建模误差位置识别的有限元模型修正方法[J]. 振动工程学报,1997,10(1):1-6.

Xiang Jinwu, Zhou Chuanrong, Zhang Azhou. Modification of Finite Element Model Based on Identified Error Locations[J]. Journal of Vibration Engineering, 1997,10(1):1-6.

[5]李伟明, 洪嘉振. 基于频响函数的模型修正方法[J].上海交通大学学报,2011,45(10):1455-1459. Li Weiming, Hong Jiazhen.

Research on Model Updating Method Based on Frequency Response Functions[J]. Journal of Shanghai Jiaotong University, 2011,45(10):1455-1459.

[6]马立元, 李世龙, 王维峰, 等. 大型复杂钢管焊接结构损伤识别方法研究[J]. 中国机械工程, 2014, 25(18): 2478-2483.

Ma Liyuan, Li Shilong, Wang Weifeng,et al. Study on Damage Identification Methods of Large and Complex Steel Tube Welded Structures[J]. China Mechanical Engineering, 2014,25(18):2478-2483.

[7]Krige D G. A Statistical Approach to Some Basic Mine Valuation Problems on the Witwatersrand[J]. Journal of the Chemecal, Metallurgical and Mining Society of South Africa,1951,52:119-139.

[8]邢红星, 琚太忠, 林建阳.普通克里格法在矿产储量计算中的应用[J]. 地质与勘探, 1997(4):46-51.

Xin Hongxing, Ju Taizhong, Lin Jianyang. The Ordinary Kriging's Application to Mineral Calculation of Reserves[J]. Geology and Prospecting, 1997(4):46-51.

[9]肖立峰,张广泉,张以都. 基于Kriging代理模型的结构形状优化方法[J]. 机械设计, 2009,26(7):57-60.

Xiao Lifeng, Zhang Guangquan, Zhang Yidu. Optimization Method of Structural Shape Based on Kriging Surrogate Model[J]. Journal of Machine Design, 2009,26(7):57-60.

[10]陈永亮,刘双,王汉涛, 等.基于Kriging代理模型的主轴箱稳健设计[J]. 天津大学学报,2011,44(12):1111-1117.

Chen Yongliang, Liu Suang, Wang Hantao, et al. Robust Design of Headstock Based on Kriging Surrogate Model[J]. Journal of Tianjin University, 2011,44(12):1111-1117.

[11]高月华,王希诚.基于Kriging代理模型的多点加点序列优化方法[J]. 工程力学,2012,29(4):90-95.

Gao Yuehua, Wang Xicheng. A Sequential Optimization Method with Multi-point Sampling Criterion Based on Kriging Surrogate Model[J]. Engineering Mechanics, 2012,29(4):90-95.

[12]于开平, 刘荣贺.多族群粒子群优化算法飞行器结构模型修正[J].振动与冲击, 2013,32(17):79-83.

Yu Kaiping, Liu Ronghe. Model Updating of a Spacecraft Structure Based on MRPSO[J]. Journal of Vibration and Shock, 2013,32(17):79-83.