大底脚螺纹抽钉正向设计方法研究

doi:10.3969/j.issn.1004-132X.2024.09.005

中国机械工程 ›› 2024, Vol. 35 ›› Issue (09): 1559-1566.DOI: 10.3969/j.issn.1004-132X.2024.09.005

大底脚螺纹抽钉正向设计方法研究

丰佳铭¹;孙宇茵¹;何英²;金万军²;廖日东¹

1.北京理工大学机械与车辆学院，北京，100081
2.中国航空工业标准件制造有限责任公司，贵阳，550014

出版日期:2024-09-25 发布日期:2024-10-23
作者简介:丰佳铭，男，1996年生，博士研究生。主要研究方向为紧固件结构强度及密封性能。E-mail：fengjmed@163.com。
基金资助:
中国航空发动机集团产学研合作项目（HFZL2019CXY021-2）；国家自然科学基金重点项目（U2141217）

Study on Forward Design Process of Screw Type Blind Rivets

FENG Jiaming¹;SUN Yuyin¹;HE Ying²;JIN Wanjun²;LIAO Ridong¹

1.School of Mechanical Engineering,Beijing Institute of Technology,Beijing,100081
2.China Aviation Industry Standard Parts Manufacturing Co.,Ltd.,Guiyang,550014

Online:2024-09-25 Published:2024-10-23

摘要/Abstract

摘要： 通过理论分析、有限元仿真和实验验证的方式进行大底脚螺纹抽钉从1到0的反向应用基础研究，建立了安装过程中力的演变规律和平衡关系，得到安装性能（预紧力、鼓包直径和高度）与关键几何参数的匹配关系，开发了可实现自动建模和仿真计算的参数化求解模块。研究结果对提高大底脚螺纹抽钉的可靠性、经济效益，推动自主研发进程具有指导意义。

关键词: 大底脚螺纹抽钉, 正向设计方法, 扩口失稳变形, 力的演变, 二次开发

Abstract: Through theoretical analysis, finite element simulation, and experimental verification, the reverse research from 1 to 0 on basic applications of screw type blind rivets was studied. The evolution and equilibrium of forces during installation processes were established. The relationships of installation performance (preload, diameter and height of blind head) and key geometric parameters were obtained. And a parametric module was developed, which might achieve automatic modeling and simulation calculations. The results have guiding significance for enhancing connection reliability, improving economic benefits, and for promoting the processes of independent research and development of the screw type blind rivets.

Key words: screw type blind rivet, forward design process, flaring-wrinkling deformation, force evolution, secondary development

中图分类号:

V229.1

丰佳铭1, 孙宇茵1, 何英2, 金万军2, 廖日东1. 大底脚螺纹抽钉正向设计方法研究[J]. 中国机械工程, 2024, 35(09): 1559-1566.

FENG Jiaming1, SUN Yuyin1, HE Ying2, JIN Wanjun2, LIAO Ridong1. Study on Forward Design Process of Screw Type Blind Rivets[J]. China Mechanical Engineering, 2024, 35(09): 1559-1566.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2024.09.005

http://www.cmemo.org.cn/CN/Y2024/V35/I09/1559

参考文献

［1］李言荣. 当前我国科技创新的关键是解决从1到0的问题［N］. 中国科学报, 2024-01-25(4).
LI Yanrong. The Key to Current Technical Innovation in China Is to Solve the Problem from 1 to 0［N］. China Science Daily, 2024-01-25(4).
［2］魏景超, 矫桂琼, 闫照明, 等. 单面螺纹抽钉干涉配合复合材料连接件挤压强度研究［J］. 航空学报, 2013, 34(7):1627-1635.
WEI Jingchao, JIAO Guiqiong, YAN Zhaoming, et al. Bearing Strength of Composite Joints Interference-fitted with Blind Bolts［J］. Acta Aeronautica et Astronautica Sinica, 2013, 34(7):1627-1635.
［3］魏景超, 柴亚南, 刘风雷, 等. 单面螺纹抽钉干涉配合复合材料连接结构的疲劳性能研究［J］. 航空制造技术, 2017, 60(22):50-55.
WEI Jingchao, CHAI Yanan, LIU Fenglei, et al. Effect of Several Influencing Factors on Fatigue Behaviour of Interference-fit Bolted Composite Joints［J］. Aeronautical Manufacturing Technology, 2017, 60(22):50-55.
［4］孙钢. 抽芯铆钉用于复合材料夹层的研究与探讨［J］. 航空标准化与质量, 2009(4):16-18.
SUN Gang. Research and Discussion on the Application of Core-pulling Rivets in Composite Sandwich［J］. Aeronautic Standardization & Quality, 2009(4):16-18.
［5］李荣霞. 大底脚螺纹抽钉铆接工艺研究［J］. 科技创新与应用, 2016(16):113.
LI Rongxia. Study on Rivet Drawing Process of Large Foot Thread［J］. Technology Innovation and Application, 2016(16):113.
［6］檀甜甜, 杨鹏, 曹娜, 等. 碳纤维复合材料结构件在不同铆接方式下的连接强度对比分析［J］. 航空精密制造技术, 2021, 57(3):14-18.
TAN Tiantian, YANG Peng, CAO Na, et al. Comparative Analysis of Joint Strength of Carbon Fiber Reinforced Plastic Structure with Different Connection Modes［J］. Aviation Precision Manufacturing Technology, 2021, 57(3):14-18.
［7］刘风雷, 赵庆云, 黄宏. 一种用沉头抽钉薄壁衬套及其成形方法:CN107866477A［P］. 2018-04-03.
LIU Fenglei, ZHAO Qingyun, HUANG Hong. A Thin-walled Sleeve with Countersunk Head and Forming Method:CN107866477A［P］. 2018-04-03.
［8］刘风雷, 赵庆云, 黄宏. 一种用于成形沉头抽钉薄壁衬套的模具及方法:CN107866477B［P］. 2020-05-05.
LIU Fenglei, ZHAO Qingyun, HUANG Hong. Mold and Forming Method for Thin-walled Sleeve with Countersunk Head:CN107866477B［P］. 2020-05-05.
［9］李伟强, 陈闯, 冷生荣, 等. 立式螺纹抽钉快速圆锥型收口装置:CN204353396U［P］. 2015-05-27.
LI Weiqiang, CHEN Chuang, LENG Shengrong, et al. Fast Conical Necking Device for Vertical Screw Type Fasteners:CN204353396U［P］. 2015-05-27.
［10］王乃文, 吴小红, 詹祖鹏, 等. 螺纹抽钉尾部收口装置:CN116550896A［P］. 2023-08-08.
WANG Naiwen, WU Xiaohong, ZHAN Zupeng, et al. Necking Device for Tail of Screw Type Fasteners:CN116550896A［P］. 2023-08-08.
［11］李伟强, 刘风雷, 陈闯, 等. 一种螺纹抽钉自动化组装机:CN109014888B［P］. 2020-04-17.
LI Weiqiang, LIU Fenglei, CHEN Chuang, et al. An Automatic Assembly Machine for Screw Type Fasteners:CN109014888B［P］. 2020-04-17.
［12］崔文峰, 王委, 陈林. 一种飞机大底角抽钉安装工具:CN214135773U［P］. 2021-09-07.
CUI Wenfeng, WANG Wei, CHEN Lin. An Installation Tool for Aviation Screw Type Blind Rivets:CN214135773U［P］. 2021-09-07.
［13］赵庆云, 刘风雷, 黄宏, 等. 一种左旋螺纹抽钉安装用风扳机枪芯:CN107876686B［P］. 2020-06-05.
ZHAO Qingyun, LIU Fenglei, HUANG Hong, et al. A Gun Core of Pneumatic Impact Wrench for Installation of Left-hand Screw Type Fasteners:CN107876686B［P］. 2020-06-05.
［14］谢仁君, 周建平, 张世林, 等. 一种大底脚螺纹抽芯铆钉数字化铆枪:CN219503669U［P］. 2023-08-11.
XIE Renjun, ZHOU Jianping, ZHANG Shilin, et al. Digital Riveting Gun for Screw Type Blind Rivets:CN219503669U［P］. 2023-08-11.
［15］孙瑞涛, 李伟强, 陈闯. 一种用于单面抽钉铆接安装板的拆卸工具:CN218283941U［P］. 2023-01-13.
SUN Ruitao, LI Weiqiang, CHEN Chuang. A Remover Tool for Installation Plates Riveted by Single-sided Pulling Type Fasteners:CN218283941U［P］. 2023-01-13.
［16］尹振波, 张辉, 鲍峰, 等. 抽钉锁紧力矩测量装置:CN105547565B［P］. 2021-03-26.
YIN Zhenbo, ZHANG Hui, BAO Feng, et al. Measuring Device for Locking Torque of Pulling Type Fasteners:CN105547565B［P］. 2021-03-26.
［17］魏亮亮, 吴琳琅, 张晓斌, 等. 一种新型可控断颈槽螺纹抽钉:CN207212884U［P］. 2018-04-10.
WEI Liangliang, WU Linlang, ZHANG Xiaobin, et al. A New Type of Controllable Broken Groove Screw Type Fasteners:CN207212884U［P］. 2018-04-10.
［18］李伟强, 陈闯, 王立东, 等. 抽钉及紧固结构:CN216306432U［P］. 2022-04-15.
LI Weiqiang, CHEN Chuang, WANG Lidong, et al. Pulling Type Fasteners and Fastening Structures:CN216306432U［P］. 2022-04-15.
［19］郭双双. 一种抽芯铆钉成形套:CN110486364B［P］. 2021-07-09.
GUO Shuangshuang. A Sleeve of Pulling Type Blind Rivets:CN110486364B［P］. 2021-07-09.
［20］丁怡, 杨高, 王新年. 一种单面抽钉的安装装置:CN108626226A［P］. 2018-10-09.
DING Yi, YANG Gao, WANG Xinnian. A Device for Single-sided Pulling Type Rivet Installation:CN108626226A［P］. 2018-10-09.

[1]	郑维彤;王三民;颉晓欣;李浩. 渐开线花键副微动磨损分析的能量耗散法[J]. 中国机械工程, 2017, 28(18): 2171-2176.
[2]	张雷;蒋诗新;张伟伟. 三维模型驱动的零件切削过程碳排放评估[J]. 中国机械工程, 2017, 28(13): 1613-1619,1627.
[3]	闫乐乐, 赵又群, 付宏勋, 王强. 机械弹性车轮的结构参数化设计[J]. 中国机械工程, 2016, 27(09): 1251-1256.
[4]	肖超, 周玉林, 盛海泳, 侯雨雷. 工业机器人机械本体模块化设计[J]. 中国机械工程, 2016, 27(08): 1018-1025.
[5]	李巧敏, 柳玉起, 章志兵, 杜亭. 基于CATIA的汽车覆盖件成形模拟后处理系统[J]. 中国机械工程, 2015, 26(6): 831-836.
[6]	秦宁, 章志兵, 许恒建, 柳玉起. 基于SolidWorks的钣金成形快速分析系统开发 [J]. 中国机械工程, 2011, 22(9): 1026-1030.
[7]	李文威, 陈南, 殷国栋. 基于参数化建模的复杂机械产品虚拟样机复用 [J]. 中国机械工程, 2011, 22(5): 530-535.
[8]	董赟, 蔡敢为, 郑战光, 毛坤朋. 基于损伤力学的疲劳寿命和裂纹扩展的数值分析 [J]. 中国机械工程, 2010, 21(20): 2412-2415.
[9]	毛宽民;叶俊;李斌;. 基于PATRAN的机床结构快速动力学建模系统的开发[J]. J4, 2008, 19(10): 0-.

大底脚螺纹抽钉正向设计方法研究

Study on Forward Design Process of Screw Type Blind Rivets

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics