中国机械工程

• 机械基础工程 • 上一篇    下一篇

基于气动性能与刚度特性的风力机翼型优化设计

汪泉;陈晓田;胡梦杰;曾利磊   

  1. 湖北工业大学机械工程学院,武汉,430068
  • 出版日期:2020-10-10 发布日期:2020-10-20
  • 基金资助:
    国家自然科学基金资助项目(51975190,51405140)

Optimization Design of Wind Turbine Airfoils Based on Aerodynamic Performance and Stiffness Characteristics

WANG Quan;CHEN Xiaotian;HU Mengjie;ZENG Lilei   

  1. School of Mechanical Engineering, Hubei University of Technology, Wuhan, 430068
  • Online:2020-10-10 Published:2020-10-20

摘要:

结合翼型泛函集成理论与叶片截面刚度矩阵数学计算模型,提出了风力机中等厚度翼型气动性能与结构刚度特性的一体化设计方法,实现了翼型气动性能与叶片截面刚度特性的同时提高。对考虑叶片截面铺层参数变化设计的WQ-B300翼型与DU97-W-300翼型进行了气动性能与结构刚度特性对比分析,结果表明:相比于DU97-W-300翼型,WQ-B300翼型的气动性能与叶片截面刚度性能均有显著提高,其挥舞刚度和摆振刚度分别提高了6.2%和8.4%,验证了该设计方法的可行性,给风力机中等厚度及大厚度翼型设计提供了一种思路。

关键词: 中等厚度翼型, 气动性能, 结构刚度特性, 一体化设计

Abstract: Combining the airfoil functional integration theory and the mathematical model of the blade cross-section stiffness matrix, an integrated design method of aerodynamic performance and structural stiffness characteristics for the medium thickness airfoils was presented. It may make the aerodynamic performance and the blade cross-sectional stiffness characteristics both increase. The aerodynamic performance and structural characteristic  of WQ-B300 airfoils which were designed considering the change of blade cross-sectional ply parameters were compared and analyzed  with DU97-W-300 airfoils. Results show that compared with DU97-W-300 airfoils, the aerodynamic performance and blade cross-sectional stiffness performance of WQ-B300 airfoils improve largely. The flapwise stiffness and edgewise stiffness are increased by 6.2% and 8.4% respectively. This study verifies the feasibility of the novel design method, and provides a good design idea for wind turbine airfoils and blade structural properties with medium or large thickness.

Key words: medium thickness airfoil, aerodynamic performance, structural stiffness characteristic, integrated design

中图分类号: