半对称三平移Delta-CU并联机构的刚度建模与分析

doi:10.3969/j.issn.1004-132X.2020.17.006

摘要/Abstract

摘要： 研究了Delta-CU机构的刚度及其特性，运用虚拟弹簧法建立了支链的柔性模型，并给出了支链的静力学方程。利用旋量方法得到了支链中的运动微分映射，根据静力学方程得出机构的笛卡儿空间刚度矩阵，并通过有限元分析验证了矩阵的正确性。最后，利用虚功刚度指标对给定参数下的Delta-CU机构进行算例分析，并将其与Delta机构进行了比较，结果表明Delta-CU机构与Delta机构具有基本相同的刚度特性。

关键词: 三平移并联机构, 刚度分析, 虚拟弹簧法, 虚功刚度指标

Abstract: Stiffness and performance of Delta-CU were studied herein. Compliance model of limb was established by using virtual spring method, and the static equations of the limb were given. Kinematic differential mapping was obtained by the screw theory, and the Cartesian stiffness matrix of the mechanisms was obtained by making use of the static equations. Finite element analyses showed that the matrix is applicable in the stiffncss analysis. Finally，based on the defined virtual work stiffness index，the Delta-CU mechanism under given parameters was analyzed and compared with the Delta mechanisms，which shows that the Delta-CU mechanism has the same translational stiffness with the conventional Delta mechanisms.

Key words: three-translation parallel mechanism, stiffness analysis, virtual-spring method, virtual work stiffness index

中图分类号:

TH11

王一熙1;吴广磊2;沈惠平1;李家宇1;孟庆梅1;李菊1;邓嘉鸣1. 半对称三平移Delta-CU并联机构的刚度建模与分析[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.17.006.

WANG Yixi1;WU Guanglei2;SHEN Huiping1;LI Jiayu1;MENG Qingmei1;LI Ju1;DENG Jiaming1. Stiffness Modeling and Analysis of Semi-symmetrical Three-translation Delta-CU Parallel Mechanism[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.17.006.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/10.3969/j.issn.1004-132X.2020.17.006

http://www.cmemo.org.cn/CN/Y2020/V31/I17/2050

参考文献

[1]AJURIA G，HORMAZA M V. A Procedure Based on Finite Elements for the Solution of Nonlinear Problems in the Kinematic Analysis of Mechanisms[J]. Finite Elements in Analysis & Design，1996，22(4)：305-327.
[2]FERNANDEZ-BUSTOS I，AGIRREBEITIA J，AJURIA G，et al. A New Finite Element to Represent Prismatic Joint Constraints in Mechanisms[J]. Finite Elements in Analysis & Design，2007，43(1)：36-50.
[3]LONG C S，SNYMAN J A，GROENWOLD A A. Optimal Structural Design of a Planar Parallel Platform for Machining[J]. Applied Mathematical Modelling，2003，27(8)：581-609.
[4]RIZK R，FAUROUX J C，MUNTEANU M，et al. A Comparative Stiffness Analysis of a Reconfigurable Parallel Machine with Three or Four Degrees of Mobility[J]. Journal of Machine Engineering，2006，6 (2)： 45-55.
[5]MATRIN H C. Introduction to Matrix Methods of Structural Analysis[M]. Montreal：McGraw-Hill Book Company，1966.
[6] DEBLAISE D，HERNOT X，MAURINE P. A Systematic Analytical Method for PKM Stiffness Matrix Calculation[C]∥Proceedings of the 2006 IEEE International Conference on Robotics and Automation. Orlando，IEEE，2006：4213-4219.
[7]GAEL E，NEUGEBAUER R，MAURINE P. Elasto-geometrical Modeling and Calibration of Redundantly Actuated PKMs Original Research Article[J]. Mechanism and Machine Theory，2010，45(5)：795-810.
[8]GOSSELIN C M. Stiffness Mapping for Parallel Manipulators[J]. IEEE Transactions on Robotics and Automation，1990，6(3)：377-382.
[9]GOSSELIN C M，ZHANG D. Stiffness Analysis of Parallel Mechanisms Using a Lumped Model[J]. International Journal of Robotics and Automation，2002，17(1)：17-27.
[10]CECCARELLI M，CARBONE G. A Stiffness Analysis for CaPaMan (Cassino Parallel Manipulator) [J]. Mechanism and Machine Theory，2002，37(5)：427-439.
[11]MAJOU F，GOSSELIN C M，WENGER P，et al. Parametric Stiffness Analysis of the Orthoglide[J]. Mechanism and Machine Theory，2007，42(3)： 296-311.
[12]PASHKEVICH A，CHABLAT D，WENGER P. Stiffness Analysis of Overconstrained Parallel Manipulators[J]. Mechanism and Machine Theory，2010，44(5)： 966-982.
[13]YAN S J，ONG S K，NEE A Y C. Stiffness Analysis of Parallelogram-type Parallel Manipulators Using a Strain Energy Method[J]. Robotics and Computer-Integrated Manufacturing，2016，37：13-22.
[14]YANG Chao，LI Qinchuan，CHEN Qiaohong. Elastostatic Stiffness Modeling of Overconstrained Parallel Manipulators[J]. Mechanism and Machine Theory，2018，122：58-74.
[15]赵铁石，赵延治，边辉，等.空间并联机构连续刚度非线性映射[J].机械工程学报，2008，44(8)：20-25.
ZHAO Tieshi，ZHAO Yanzhi，BIAN Hui，et al. Continuous Stiffness Nonlinear Mapping of Spatial Parallel Mechanism[J]. Journal of Mechanical Engineering，2008，44(8)：20-25.
[16]周玉林，高峰.3-RRR 3自由度球面并联机构静刚度分析[J]. 机械工程学报，2009，45(4)：25-32.
ZHOU Yulin，GAO Feng. Stiffness Analysis of Spherical Parallel Mechanism 3-RRR with 3-DOF[J]. Journal of Mechanical Engineering，2009，45(4)：25-32.
[17]LU Yi，HU Bo. Analyzing Kinematics and Solving Active/Constrained Forces of a 3SPU + UPR Parallel Manipulator[J]. Mechanism and Machine Theory，2006，42(10)：1298-1313.
[18]胡波，路懿. 求解3-RPS并联机构刚度的新方法[J]. 机械工程学报，2010，46（1）：24-29.
HU Bo，LU Yi. New Approach for Analyzing the Stiffness of 3-RPS Parallel Manipulator[J]. Chinese Journal of Mechanical Engineering，2010，46（1）：24-29.
[19]李树军, 张余, 孟巧玲. 6-PSS空间并联机构的刚度特性[J]. 中国机械工程, 2009，20(21)：2521-2525.
LI Shujun，ZHANG Yu，MENG Qiaoling. Stiffness Characteristics of a 6-PSS Spatial Parallel Mechanism[J]. China Mechanical Engineering，2010，20(21):2521-2525.
[20]崔学良，韩先国，陈五一. 特殊复合球铰3-RPS并联机构及其连续刚度模型[J]. 北京航空航天大学学报，2010， 36(11)：1275-1280.
CUI Xueniang，HAN Xianguo，CHEN Wuyi. Continuous Stiffness Modeling of 3-PRS Parallel Kinematic Machine with Special Composite Joints[J]. Journal of Beijing University of Aeronautics and Astronautics，2010，36(11)： 1275-1280.
[21]徐东涛，孙志礼，于晓光. 考虑杆件弹性变形的改进型Delta并联机构刚度特性分析[J]. 农业机械学报，2013，44(5)：294-298.
XU Dongtao，SUN Zhili，YU Xiaoguang. Stiffness Characteristic Analysis of Modified Delta Parallel Mechanism Based on Bars' Elastic Deformation[J]. Transactions of The Chinese Society of Agricultural Machinery[J]. 2013，44(5)：294-298.
[22]WU Guanglei，BAI Shaopin，KEPLER J. Mobile Platform Center Shift in Spherical Parallel Manipulators with Flexible Limbs[J]. Mechanism and Machine Theory，2014,75：12-26.
[23]LI Jiayu，SHEN Huiping，MENG Qingmei，et al. A Delta-CU -- Kinematic Analysis and Dimension Design[C]∥International Conference on Intelligent Robotics and Applications. Wuhan，2017：371-382.
[24]李家宇，沈惠平，孟庆梅，等.一种Delta变形机构及其基于工作空间分析的尺度设计[J].机械设计，2018，35(7)：92-98.
LI Jiayu，SHEN Huiping，MENG Qingmei，et al.A Delta Derived Mechanism and Its Scale Design Based on Working Space Analysis[J]. Journal of Machine Design，2018，35(7): 92-98.
[25]李家宇，孟庆梅，邓嘉鸣，等.一种非完全对称新型Delta-CU并联机构的动力学分析[J]. 常州大学学报(自然科学版)，2019，31(5)：77-86.
LI Jiayu，MENG Qingmei，DENG Jiaming，et al. Dynamic Analysis of a Not-Fully-Symmetrical New Delta-CU Parallel Mechanism[J]. Journal of Changzhou University(Natural Science Edition)，2019，31(5)：77-86.
[26]梅凤祥. 分析力学[M]. 北京：北京理工大学出版社，2013.
MEI Fengxiang. Analytical Mechanics[M]. Beijing： Beijing Institute of Technology Press，2013.