基于螺杆泵送料的陶瓷三维打印机挤出机理

摘要/Abstract

摘要： 微流挤出堆积成形精度主要受打印材料和工艺参数的影响。为了提高陶瓷制件的打印精度，采用螺杆泵输送浆料，以保证浆料连续进给、压力恒定，实现非连续打印；对打印材料进行流变特性分析，根据打印平台结构参数计算挤出速度与流量；最后，建立数学模型，将材料流变特性与平台运动参数合理匹配，并进行了相关实验。实验结果与理论计算结果相一致，验证了送料机构与该数学模型可提高打印精度。

关键词: 三维打印, 螺杆泵, 挤出成形, 陶瓷浆料

Abstract: The precision of micro-flow extrusion was mainly influenced by printed materials and processing parameters. In order to improve the printing precision of ceramic parts, a screw pump was adopted to transport the slurry to ensure continuous feeding of slurry and constant pressure and to realize discontinuous printing. Then, the rheological characteristics of the printing materials were analyzed, and the extrusion speed and flow were calculated according to the structure parameters of the printing platform. Finally, the mathematical model was established, and the rheological properties of the materials were matched with the motion parameters of the platform reasonably. Relevant experiments were carried out. The experimental results are consistent with the theoretical calculation ones, which verifies that the feeding mechanisms and the mathematical model may improve the printing accuracy.

Key words: three dimensional(3D) printing, screw pump, extrusion molding, ceramic slurry

中图分类号:

TP23
TP331

张静, 周婧, 段国林. 基于螺杆泵送料的陶瓷三维打印机挤出机理[J]. 中国机械工程.

ZHANG Jing, ZHOU Jing, DUAN Guolin. Extrusion Mechanism of Ceramic 3D Printer Based on Screw Pump Feeding[J]. China Mechanical Engineering.

参考文献

[1]SING S L, YEONG W Y, WIRIA F E, et al. Direct Selective Laser Sintering and Melting of Ceramics: a Review[J]. Rapid Prototyping Journal, 2017, 23(3):611-623.
[2]SHAHZAD K, DECKERS J, KRUTH J P, et al. Additive Manufacturing of Alumina Parts by Indirect Selective Laser Sintering and Post Processing[J]. Journal of Materials Processing Technology, 2013, 213(9):1484-1494.
[3]DECKERS J, MEYERS S, KRUTH J P, et al. Direct Selective Laser Sintering/Melting of High Density Alumina Powder Layers at Elevated Temperatures[J]. Physics Procedia, 2014, 56:117-124.
[4]DU Wenchao, REN Xiaorui，MA Chaopei，et al. Ceramic Binder Jetting Additive Manufacturing:Particle Coating for Increasing Powder Sinterability and Part Strength[J]. Materials Letters, 2019, 234:327-330.
[5]LI Yuzhou, HU Yingbin, CONG Weilong, et al. Additive Manufacturing of Alumina Using Laser Engineered Net Shaping:Effects of Deposition Variables[J]. Ceramics International, 2017, 43(10):7768-7775.
[6]邵惠锋,贺永,傅建中. 增材制造可降解人工骨的研究进展——从外形定制到性能定制[J]. 浙江大学学报(工学版), 2018, 52(6):1035-1057.
SHAO Huifeng, HE Yong, FU Jianzhong. Research Advance of Degradable Artificial Bone with Additive Manufacturing:Customization from Geometric Shape to Property[J]. Journal of Zhejiang University (Engineering Science Edition), 2018, 52(6):1035-1057.
[7]周婧, 段国林. 用于三维打印的陶瓷义齿材料制备及性能研究[J]. 生物医学工程学杂志, 2017, 34(6):914-921.
ZHOU Jing, DUAN Guolin. Research on Preparation and Performance of Ceramic Denture Materials Applied for Three Dimensional Printing[J]. Journal of Biomedical Engineering, 2017, 34(6):914-921.
[8]李亚运, 司云晖, 熊信柏,等. 陶瓷3D打印技术的研究与进展[J]. 硅酸盐学报, 2017, 45(6):793-805.
LI Yayun, SI Yunhui, XIONG Xinbai, et al. Research and Progress on Three-dimensional Printing of Ceramic Materials[J]. Journal of the Chinese Ceramic Society, 2017, 45(6):793-805.
[9]MORISSETTE S L, LEWIS J A, CESARANO J, et al. Solid Freeform Fabrication of Aqueous Alumina-Poly(Vinyl Alcohol) Gelcasting Suspensions[J]. Journal of the American Ceramic Society, 2000, 83(10):2409-2416.
[10]WANG Jiwen, LEON L S, THOMAS B C. Solid Freeform Fabrication of Permanent Dental Restorations-via Slurry Micro Extrusion[J]. Journal of the American Ceramic Society, 2006, 89(1):346-349.
[11]李小倩. 基于MAM自由成形技术的ZrO2全瓷牙冠制备工艺研究[D]. 武汉：华中科技大学，2013.
LI Xiaoqian. Study on the Preparation Process of ZrO2 All-ceramic Crown Based on MAM Free Forming Technology[D]. Wuhan:Huazhong University of Science and Technology, 2013.
[12]伍权，张祥林，吴斌，等. 基于挤出沉积成形技术的多孔生物支架制备[J]. 华中科技大学学报（自然科学版），2011, 39（12）：33-36.
WU Quan, ZHANG Xianglin, WU Bin, et al. Preparation of Porous Scaffold Based on Precision Extrusion Deposition Freeform Fabrication Technology[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2011, 39(12):33-36.
[13]翟亚楠, 刘洪军, 秦宝宏,等. 基于挤出工艺的陶瓷零件增材制造及其关键技术[J]. 中国陶瓷, 2015,51(2):1-6.
ZHAI Yanan, LIU Hongjun, QIN Baohong, et al. Additive Manufacturing Processes Based on Extrution and the Key Technologies[J]. China Ceramics, 2015,51(2):1-6.
[14]HUANG Tieshu, MASON M S, ZHAO Xiyue, et al. Aqueous Based Freeze-form Extrusion Fabrication of Alumina Components[J]. Rapid Prototyping Journal, 2009,15(2):88-95.
[15]MASON M S, HUANG T, LANDERS R G, et al. Aqueous Based Extrusion of High Solids Loading Ceramic Pastes:Process Modeling and Control[J]. Journal of Materials Processing Technology, 2009, 209(6):2946-2957.
[16]刘洪军,李冬健,刘佳. 水基ZrB2膏体的挤出流变行为研究[J]. 中国陶瓷, 2013, 49(7):24-27.
LIU Hongjun, LI Dongjian, LIU Jia. Research on Rheological Behavior during Extrusion of Aqueous ZrB2 Paste[J]. China Ceramics, 2013, 49(7):24-27.
[17]郑华滨.陶瓷膏体挤出装置和挤出工艺研究[D]. 兰州：兰州理工大学，2011.
ZHENG Huabin. Ceramic Paste Extrusion Device and Extrusion Process Research[D]. Lanzhou:Lanzhou University of Technology, 2011.
[18]金乐, 熊卓, 刘利, 等. 基于活塞挤出的组织工程支架低温沉积制造工艺[J]. 清华大学学报(自然科学版), 2009, 49(5):652-655.
JIN Le, XIONG Zhuo, LIU Li, et al. Low Temperature Deposition Based on Piston Extrusion for Fabrication Tissue Engineering Scaffolds[J]. Journal of Tsinghua University(Science and Technology), 2009, 49(5):652-655.
[19]闫存富, 李淑娟, 杨磊鹏. 低温挤压自由成形技术及其应用[J]. 兵器材料科学与工程, 2016, 39(1):104-109.
YAN Cunfu, LI Shujuan, YANG Leipeng. Low Temperature Freeze-form Extrusion Fabrication Technology and Application[J]. Ordnance Material Science and Engineering, 2016, 39(1):104-109.
[20]覃亚伟, 骆汉宾, 车海潮, 等. 基于挤出固化的建筑3D打印装置设计及验证[J]. 土木工程与管理学报, 2016, 33(1):54-60.
YU Yawei, LUO Hanbin, CHE Haichao, et al. Design and Verification of 3D Printing Device Based on Extrusion Curing[J]. Journal of Civil Engineering and Management, 2016, 33(1):54-60.
[21]BUSWELL R A, SOAR R C, GIBB A G F, et al. Freeform Construction:Mega-scale Rapid Manufacturing for Construction[J]. Automation in Construction, 2007, 16(2):224-231.
[22]董小桠. 单螺杆泵流场数值模拟及结构参数优化研究[D]. 成都：西南石油大学,2016.
DONG Xiaoya. Numerical Simulation of Flow Field and Optimization of Structural Parameters of Single Progressing Cavity Pump[D]. Chengdu:Southwest Petroleum University, 2016.
[23]金红杰, 吴恒安, 王秀喜. 螺杆泵腔室液压分布数值模拟研究[J]. 机床与液压, 2010, 38(1):92-94.
JIN Hongjie, WU Hengan, WANG Xiuxi. Numerical Simulation on Cavity Pressure of Progressing Cavity Pump[J]. Hydro Mechatronics Engineering, 2010, 38(1):92-94.
[24]EISSA A, AHMED A, TAN N. Analysis and Prediction of Fluid Flow Behavior in Progressing Cavity Pumps[J]. Journal of Fluids Engineering-Transactions of the ASME, 2017, 139(12):121102.
[25]PALADINO E E, ALMEIDA R F C, ASSMANN B W, et al. A Computational Model for Analysis of Fluid-structure Interaction within Elastomeric Progressing Cavity Pumps[C]//SPE Progressing Cavity Pumps Conference. Calgary, 2013:102118/165650-MS.
[26]JACKSON R J, WOJCIK A, MIODOWNIK M. 3D Printing of Asphalt and Its Effect on Mechanical Properties[J]. Materials & Design, 2018, 160:468-474.
[27]李福田. 螺杆泵[M]. 北京：机械工业出版社，2010.
LI Futian. Progressing Cavity Pump[M]. Beijing:Mechanical Industry Press, 2010.