一种滑动轴承油膜性能计算的动网格方法

摘要/Abstract

摘要： 针对应用动网格方法计算油膜轴承性能时出现网格扭曲而导致累计误差过大的现象，提出了一种基于计算流体动力学(CFD)的滑动轴承油膜性能计算的动网格更新方法。该方法保证了网格更新过程中膜厚方向的网格线沿圆周方向上等均分布，且始终垂直于轴颈表面，网格不发生扭曲变形，减小了计算累计误差，提高了轴承性能计算的准确性。通过与典型算例和实验结果对比，验证了所提方法在轴承的油膜力和转子静平衡位置计算中的有效性、可行性和稳定性，并利用该方法分析了进油压力和载荷对油膜轴承所支撑转子静平衡位置的影响。该方法可为准确计算油膜轴承转子系统的性能提供参考。

关键词: 油膜轴承, 动网格, 静平衡, 轴心轨迹, 计算流体动力学

Abstract: In order to avoid the phenomenon of mesh distortion and reduce the errors in the applications of dynamic mesh method to calculate oil-film bearing performance, a dynamic mesh updating method was proposed based on CFD. This method ensured that all of the updated radial mesh lines along oil-film clearance were well-distributed along the circumferential direction. During the mesh updating processes, the radial mesh lines in the direction of film thickness were always perpendicular to the journal surfaces, which could ensure oil-film mesh not distortions and improve accuracy of mesh computation. The new dynamic mesh updating method was used to calculate the oil-film forces of the journal bearings and the static balance positions of the rotors. The results were compared with the calculating ones and the experimental ones of typical examples, the effectiveness, feasibility and stability of the dynamic mesh updating method proposed may be verified. By using the method, effects of different inlet oil pressures and loads on static balance positions of the rotors supported by oil-film bearings were analyzed. The proposed method may provide reference for accurately calculating the performance of the oil-film bearing-rotor systems.

Key words: oil-film bearing, dynamic mesh, static balance, axis locus, computational fluid dynamics(CFD)

中图分类号:

TH133.3

吴超1;尹雪梅2;李蒙蒙1;李奕君1;王文3. 一种滑动轴承油膜性能计算的动网格方法[J]. 中国机械工程.

WU Chao1;YIN Xuemei2;LI Mengmeng1;LI Yijun1;WANG Wen3. A Dynamic Mesh Method Used to Calculate Oil Film Performance of Journal Bearings[J]. China Mechanical Engineering.

参考文献

[1]李锋,刘占生,李明海,等.非零压差边界下间隙流动雷诺方程近似解析解[J].航空动力学报,2018, 33(1):156-164.
LI Feng, LIU Zhansheng, LI Minghai, et al.Approximate Analytical Solution of the Reynolds Equation for Clearance Flow with Pressure Difference Boundary Conditions[J].Journal of Aerospace Power,2018,33(1):156-164.
[2]康召辉,任兴民,何尚文,等．浮环涡动对浮动环轴承油膜压力分布影响的研究[J].航空动力学报,2010,25(5):1197-1202.
KANG Zhaohui, REN Xingmin, HE Shangwen, et al. Study on the Effects of Whirling Motion of the Floating Ring on the Distribution of Oil Pressure in a Floating Ring Bearing[J].Journal of Aerospace Power,2010,25(5):1197-1202.
[3]SHI D Y, SHI X J, SHI X B. Numerical Computation of Dynamic Character Coefficient of Journal Bearing[J]. Key Engineering Materials,2011,486(7):45-48.
[4]吕延军,张永芳,季丽芳,等.固定瓦-可倾瓦滑动轴承转子非线性系统的动力特性分析[J].中国电机工程学报,2010,30(20):79-87.
LYU Yanjun, ZHANG Yongfang, JI Lifang, et al. Analysis of Dynamic Characteristics of Rotor Nonlinear System Supported by Fixed-tilting Pad Journal Bearing[J]. Proceedings of the CSEE,2010,30(20):79-87.
[5]MORI A, MAKINO T, MORI H. Entry Flow and Pressure Jump in Submerged Multi-pad Bearings and Grooved Bearings[J].Journal of Tribology,1992,114(2):370-377.
[6]TUCKER P G, KEOGH P S. On the Dynamic Thermal State in a Hydrodynamic Bearing with a Whirling Journal Using CFD Techniques[J].Journal of Tribology,1996, 118(2):356-363.
[7]SAHLIN F, GLAVATSKIH S B, ALMQUIS T, et al. Two Dimensional CFD Analysis of Micro-patterned Surfaces in Hydrodynamic Lubrication[J]. Journal of Tribology, 2005, 127(1):96-127.
[8]GERTZOS K P, NIKOLAKOPOULOS P G, PAPADOPOULOS C A. CFD Analysis of Journal Bearing Hydrodynamic Lubrication by Bingham Lubricant[J].Tribology International,2008,41(12):1190-1204.
[9]孟凡明,陈原培,杨涛. CFX和Fluent在径向滑动轴承润滑计算中的异同探讨[J].重庆大学学报,2013,36(1):7-14.
MENG Fanming, CHEN Yuanpei, YANG Tao. Discussion on Similarities and Differences between CFX and Fluent Software in Calculating Journal Bearing Lubrication [J]. Journal of Chongqing University,2013, 36(1):7-14.
[10]黄首峰,郭红,张绍林,等.基于FLUENT的径向滑动轴承油膜压力仿真[J].机械设计与制造,2012(10):248-250.
HUANG Shoufeng, GUO Hong, ZHANG Shaolin, et al. Static Characteristics Simulation of Journal Sliding Bearing Based on FLUENT[J]. Machinery Design ＆ Manufacture,2012(10):248-250.
[11]熊万里,侯志泉,吕浪,等. 基于动网格模型的液体动静压轴承刚度阻尼计算方法[J].机械工程学报,2012, 48(23):118-126.
XIONG Wanli, HOU Zhiquan, LYU Lang, et al. Method for Calculating Stiffness and Damping Coefficients of Hybrid Bearings Based on Dynamic Mesh Model[J].Journal of Mechanical Engineering,2012,48(23):118-126.
[12]王少力,熊万里,桂林,等. 偏载液体静压转台旋转工况下承载力及倾覆力矩动网格计算方法[J].机械工程学报,2014,50(23):66-74.
WANG Shaoli, XIONG Wanli, GUI Lin,et al. Dynamic Mesh Method for Calculating Bearing Capacity and Overturning Moment of Partial Loaded Hydrostatic Rotary Tables under Rotating Condition[J].Journal of Mechanical Engineering, 2014,50(23):66-74.
[13]李强,许伟伟,赵月,等.基于瞬态流场计算的滑动轴承静平衡位置求解[J].中国石油大学学报,2015,39(2)：104-110.
LI Qiang, XU Weiwei, ZHAO Yue, et al.Solution of Static Equilibrium Position of Journal Bearing Based on Transient Flow Calculation[J].Journal of China University of Petroleum,2015,39(2):104-110.
[14]LI Qiang, YU Guichang, LIU Shulian, et al.Application of Computational Fluid Dynamics and Fluid Structure Interaction Techniques for Calculating the 3D Transient Flow of Journal Bearings Coupled with Rotor Systems[J]. Chinese Journal of Mechanical Engineering,2012,25(5):926-932.
[15]LI Mengxuan, GU Chaohua, PAN Xiaohong, et al. A New Dynamic Mesh Algorithm for Studying the 3D Transient Flow Field of Tilting Pad Journal Bearings[J]. Journal of Engineering Tribology,2016,230(12):1470-1482.
[16]林禄生,刘桂萍,陈园.复杂转子-轴承系统非线性动力学特性分析[J].机械强度,2015,37(3):381-386.
LIN Lusheng,LIU Guiping,CHEN Yuan.Nonlinear Dynamic Behaviors Analysis of Complex Rotor-bearing System[J].Journal of Mechanical Strength,2015,37(3):381-386.
[17]孙丹,李胜远,白伟钢,等.考虑轴颈涡动的滑动轴承动力特性数值研究[J].航空动力学,2018,33(1):137-146．
SUN Dan, LI Shengyuan, BAI Weigang, et al.Numerical Study on Dynamic Characteristics of Journal Bearing Considering Journal Whirling Motion[J]. Journal of Aerospace Power,2018,33(1):137-146.
[18]周俊杰，徐国权，张华俊. FLUENT工程技术与实例分析[M].北京：中国水利水电出版社,2010:41-66.
ZHOU Junjie, XU Guoquan, ZHANG Huajun. FLUENT Engineering Technology and Case Study[M].Beijing:China Water Power Press,2010:41-66.
[19]张直明.滑动轴承的流体动力润滑理论[M].北京:高等教育出版社,1986:211-222,276.
ZHANG Zhiming. Hydrodynamic Lubrication Theory of Sliding Bearings[M].Beijing:Higher Education Press, 1986:211-222, 276.