六轴运动平台几何误差与阵列光纤对准精度的映射关系

摘要/Abstract

摘要： 针对光缆中阵列光纤与波导芯片精准对接问题，运用光电子封装系统六轴精密运动平台，研究了控制阵列光纤的位姿及对准精度。依据齐次坐标矩阵的几何误差模型，采用方差敏感性分析方法，辨识得出影响对准精度的重要误差项；分析了运动平台的搭建结构，探讨了运动平台几何误差与光纤对准精度的映射规律。实验结果表明，该方法可靠、有效，可为提高光纤封装效率与对准效率提供参考。

关键词: 多轴运动平台, 光纤对准精度, 几何误差, 映射规律, 封装系统

Abstract: Aiming at positions and poses of fiber array which was fixed on six-axis stage, geometric error model was established by homogeneous transformation matrix. A variance sensitivity analysis was adopted to identify important error terms on alignment accuracy according to stage configuration. Based on the results, mapping rules between geometric errors in multi-axis motion stage and alignment accuracy of fiber array were established. This analyzing procedure is reliable from the simulation results, and also may develop the mapping rules easily and conveniently, which will be as the theoretical basis for increasing packaging efficiency and alignment efficiency.

Key words: multi-axis motion stage, fiber alignment accuracy, geometric error, mapping rule;package system

中图分类号:

TH161

唐皓;唐果宁. 六轴运动平台几何误差与阵列光纤对准精度的映射关系[J]. 中国机械工程.

TANG Hao;TANG Guoning. Mapping Rules between Geometric Errors in Six-axis Stages and Alignment Accuracy of Fiber Array[J]. China Mechanical Engineering.

参考文献

[1]LI X H,GAO W,HIROSHI M,et al. A Six Degree of Freedom Surface Encoder for Precision Positioning of a Planar Motion Stage [J].Precision Engineering,2013,37(3):771-781.
[2]郑煜，段吉安.平面光波导与阵列光纤耦合分析[J].中南大学学报（自然科学版）,2009,40(3):681-686.
ZHENG Yu,DUAN Ji'an.Coupling Analysis between Planar Optical Waveguide and Fiber Array [J].Journal of Central South University (Science and Technology),2009,40(3):681-686.
[3]SUH S H,LEE E S,JUNG S Y. Error Modeling and Measurement for the Rotary Table of Five-axis Machine Tools[J].Advanced Manufacturing Technology,1998,14(9):656-663.
[4]ERIK L J,BANCHA A. Systematic Geometric Rigid Body Error Identification of 5-axis Milling Machines[J].Computer-Aided Design,2007,39(4):229-244.
[5]刘又午.多体动力学的休斯敦方法及其发展[J].中国机械工程,2000,11(6):601-607.
LIU Youwu. Development of Huston's Method on Multi-body Dynamics[J].China Mechanical Engineering,2000,11(6):601-607.
[6]张栋，张承进，魏强，等.压电工作台的神经网络建模与控制[J].光学精密工程,2012,20(3):587-596.
ZHANG Dong,ZHANG Chengjin,WEI Qiang,et al. Modeling and Control of Piezo-stage Using Neural Networks [J]. Opt. Precision Eng.,2012,20(3):587-596.
[7]粟时平，李圣怡，王贵林. 基于空间误差模型的加工中心几何误差辨识方法[J]. 机械工程学报，2002,38(7):121-125.
SU Shiping,LI Shengyi,WANG Guilin. Identification Method for Errors of Machining Center Based on Volumetric Error Model[J]. Chinese Journal of Mechanical Engineering,2002,38(7):121-125.
[8]王秀山，杨建国，闫嘉钰. 基于多体系统理论的五轴机床综合误差建模技术[J]. 上海交通大学学报，2008,42(5):761-765.
WANG Xiushan,YANG Jianguo,YAN Jiayu. Synthesis Error Modeling of the Five-axis Machine Tools Based on Multi-body System Theory[J].Journal of Shanghai Jiaotong University,2008,42(5):761-765.
[9]杨建国，任永强，朱卫斌，等. 数控机床热误差补偿模型在线修正方法研究[J].机械工程学报，2003,39(3):81-84.
YANG Jianguo,REN Yongqiang,ZHU Weibin，et al. Research on On-line Modeling Method of Thermal Error Compensation Model for CNC Machine[J].Chinese Journal of Mechanical Engineering,2003,39(3):81-84.
[10]田延岭，张大卫，陈华伟，等. 基于微定位工作台的精密磨削过程动力学建模与误差补偿技术[J]. 机械工程学报，2005,41(4):168-173.
TIAN Yanling,ZHANG Dawei,CHEN Huawei,et al. Modeling of Precision Grinding Process Based on Micro-positioning Table and Error Compensation Technology[J].Chinese Journal of Mechanical Engineering,2005,41(4):168-173.
[11]TANG Hao,DUAN Ji'an,LAN Shuhuai,et al. A New Geometric Error Modeling Approach for Multi-axis System Based on Stream of Variation Theory[J].International Journal of Machine Tools and Manufacture,2015,92:41-51.
[12]TANG Hao,DUAN Ji'an,ZHAO Qiancheng. A Systematic Approach on Analyzing the Relationship between Straightness & Angular Errors and Guideway Surface in Precise Linear Stage [J]. International Journal of Machine Tools and Manufacture,2017,120:12-19.
[13]TANG Hao,DUAN Ji'an,LU Shengqiang.Stream- of-variation (SOV) Theory Applied in Geometric Error Modeling for Six-axis Motion Platform[J].IEEE Transactions on Systems,Man,and Cybernetics:Systems,2017,120:1-9.
[14]唐皓，段吉安，郑煜,等. 平面光波导精密对准平台运动误差的敏感性分析[J].中国机械工程,2012,23(8):888-892.
TANG Hao,DUAN Ji'an,ZHENG Yu,et al. Motion Error Sensitivity Analysis of Planar Optical Waveguide Precise Aligning Stage[J].China Mechanical Engineering,2012,23(8):888-892.
[15]ZI B,DING H F,WU X,et al. Error modeling and Sensitivity Analysis of a Hybrid-driven Based Cable Parallel Manipulator[J].Precision Engineering,2014,38(1):197-211.