[1]赵启林, 高一峰, 李飞. 复合材料预紧力齿连接技术研究现状与进展[J]. 玻璃钢/复合材料, 2014,41(12):52-56.
ZHAO Qilin, GAO Yifeng, LI Fei . Current Research and Development of the Application of the Pre-tightened Tooth Connection[J]. Fiber Reinforced Plastics/Composites, 2014,41(12): 52-56.
[2]DENG A Z, ZHAO Q L, LI F, et al. Research on Bearing Capacity of Single Tooth to Composite Pre-tightened Teeth Connection[J]. Journal of Reinforced Plastics & Composites, 2013, 32(21):1603-1613.
[3]徐龙星, 程营, 陈立,等. 拉压状态下预紧力齿连接接头承载力和剪应力分布规律研究[J]. 玻璃钢/复合材料, 2015,42(6):23-28.
XU Longxing, CHENG Ying, CHEN Li, et al. Research on Bearing Capacity and Shear Stress Distribution of Composite Pre-tightened Teeth Connection in Tension and Compression [J]. Fiber Reinforced Plastics/Composites,2015,42(6):23-28.
[4]高建岗, 刘鹏飞, 赵启林,等. 复合材料预紧力齿连接件剪切疲劳实验研究[J]. 玻璃钢/复合材料, 2015,42(8):25-30.
GAO Jiangang, LIU Pengfei, ZHAO Qilin, et al. Experimental Study on Shear Fatigue Performance of Composite Pre-tightening Tooth Connector [J]. Fiber Reinforced Plastics/Composites, 2015,42(8):25-30.
[5]孙建,刘亚文,高一峰,等. 钢齿齿长变化对复合材料预紧力齿连接接头力学性能影响的实验研究[J]. 中国机械工程, 2017, 28(9):1101-1105.
SUN Jian, LIU Yawen, GAO Yifeng, et al. Experimental Research on Mechanics Properties of Composite Pre-tightened Teeth Connection Based on Length Changes of Steel Teeth [J]. China Mechanical Engineering, 2017, 28(9): 1101-1105.
[6]山本晃. 螺纹连接的理论与计算[M].上海:上海科技文献出版社,1984.
YAMAMOTO A. The Theory and Calculation of Threaded Connections[M]. Shanghai: Shanghai Science and Technology Literature Press, 1984.
[7]郭玉瑛. 飞机设计手册.第3册,材料[M].北京: 航空工业出版社, 1997.
GUO Yuying. Design Manual of Aircraft (V3: Materials)[M]. Beijing: Aviation Industry Press, 1997.
[8]KISHI N, AHMED A, YABUKI N, et al. Nonlinear Finite Element Analysis of Topand Seatangle with Double Webangle Connections [J]. Structural Engineering & Mechanics, 2001, 12(2):201-214.
[9]谭申刚. MJ螺纹强度理论与计算[M].西安:西北工业大学出版社,2014.
TAN Shengang. Theory and Calculation of MJ Thread Connection Strength [M]. Xi'an: Northwestern Polytechnical University Press,2014.
[10]陈海平, 曾攀, 方刚,等. 螺纹副承载的分布规律[J]. 机械工程学报, 2010, 46(9):171-178.
CHEN Haiping, ZENG Pan, FANG Gang, et al. Load Distribution of Bolted Joint [J]. Journal of Mechanical Engineering, 2010, 46(9):171-178.
[11]郭寓岷, 刘广立, 贺贤娟. 中厚板高强度螺栓连接性能试验研究[J]. 钢结构, 1997,12(3):43-48.
GUO Yumin, LIU Guangli, HE Xianjuan. The Test & Research on Connecting Behavior of High Strength Bolt for Medium Thick Plate [J].Steel Construction, 1997,12(3):43-48. |