3-RSR型并联车载天线机构动力学优化与仿真

摘要/Abstract

摘要： 动态特性是高速高精密天线功能实现的关键。采用3-RSR(R为转动副，S为球面副)型并联机构作为车载天线构型，基于拉格朗日方程建立基体运动下天线机构动力学模型。以固有频率为目标，利用遗传算法对3-RSR天线机构参数进行优化，性能对比验证了优化结果的有效性。考虑风雪载荷及车体随机激励工况，建立车载天线机构仿真模型，分析得到相应工况下驱动力矩变化曲线。研究工作对车载天线机构动力学设计及样机研制具有参考意义。

关键词: 车载天线, 并联机构, 动力学, 机构参数优化

Abstract: Dynamic characteristics are the key to realize the high-speed and high-precision antenna functions. Using 3-RSR (R as a rotating pair, S as a spherical pair) type parallel mechanism as the configuration of the vehicle antenna, the dynamics model of the mechanisms was established by using Lagrange equation. With the natural frequency as the goal, the parameters of 3-RSR antenna were optimized by genetic algorithm, and the performance comparisons verified the effectiveness of the optimization results. Considering the wind-snow loads and the random excitation conditions of the vehicle bodies, a simulation model of the vehicle-mounted antenna mechanisms was established, the change curves of driving torques were obtained under the corresponding working conditions. The research work has a reference meaning to the dynamics design of vehicle antenna mechanisms and prototype development.

Key words: vehicle-borne antenna, parallel mechanism, dynamics, mechanism parameter optimization

中图分类号:

TH112

杨彦东1;周治宇1;邓云蛟1;段艳宾2;窦玉超2;曾达幸1，3;侯雨雷1，3. 3-RSR型并联车载天线机构动力学优化与仿真[J]. 中国机械工程.

YANG Yandong1;ZHOU Zhiyu1;DENG Yunjiao1;DUAN Yanbin2;DOU Yuchao2;ZENG Daxing1，3;HOU Yulei1，3. Dynamics Optimization and Simulation of 3-RSR Parallel Vehicle-borne Antenna Mechanisms[J]. China Mechanical Engineering.

参考文献

[1]约翰·克劳斯, 罗纳德·马赫夫克. 天线[M]. 3版. 北京: 电子工业出版社, 2011: 1-9.
KRAUS J D,MARHEFKA R J. Antennas:For All Applications[M]. 3rd ed. Beijing: Electronic Industry Press, 2011:1-9.
[2]黄真, 赵永生, 赵铁石. 高等空间机构学[M]. 北京: 高等教育出版社，2006: 100-114.
HUANG Zhen, ZHAO Yongsheng, ZHAO Tieshi. Advanced Spatial Mechanism[M].Beijing: Higher Education Press，2006: 100-114.
[3]ARTEMENKO Y N, SIL'VESTROV E, KORENOVSKII V, et al. Method for the Synthesize of Parallel-structure Mechanisms for Orientating a Space Telescope Antenna[J]. Journal of Machinery Manufacture and Reliability, 2012, 41(4): 265-269.
[4]KOCH P M, KESTEVEN M, NISHIOKA H, et al. The AMiBA Hexapod Telescope Mount[J]. Astrophysical Journal, 2009, 694(2): 1670-1684.
[5]侯雨雷, 段艳宾, 窦玉超, 等. 65米射电望远镜天线副面调整机构标定研究[J]. 中国机械工程, 2013, 24(24): 3318-3322.
HOU Yulei, DUAN Yanbin, DOU Yuchao, et al. Calibration of Adjusting Mechanism for Subreflector of a 65 Meters Radio Telescope[J]. China Mechanical Engineering, 2013, 24(24): 3318-3322.
[6]姚蕊, 李庆伟, 孙京海, 等. FAST望远镜馈源舱精度分析研究[J]. 机械工程学报, 2017, 53(17): 36-42.
YAO Rui, LI Qingwei, SUN Jinghai, et al. Accuracy Analysis on Focus Cabin of FAST[J]. Journal of Mechanical Engineering, 2017, 53(17): 36-42.
[7]段艳宾, 贾彦辉, 李建军, 等. 应用于天线座的并联机构构型设计[J]. 机械制造, 2014, 52(8): 26-29.
DUAN Yanbin, JIA Yanhui, LI Jianjun, et al. Configuration Design of Parallel Mechanism Applied to Antenna Pedestal[J]. Machinery, 2014, 52(8): 26-29.
[8]陈兵奎, 赵骧, 王永波. 并联机构卫星通讯稳定平台运动学分析[J]. 重庆大学学报, 2008, 31(9): 982-987.
CHEN Bingkui, ZHAO Xiang, WANG Yongbo. Kinematic Analysis of a Stabilized Parallel Mechanism Platform for Satellite Communication[J]. Journal of Chongqing University, 2008, 31(9): 982-987.
[9]华为实. 基于3-RSR并联机器人机构的天线支撑[J]. 机械, 2000, 27(5): 10-11.
HUA Weishi. Antenna Support Based on 3-RSR Parallel Robot Mechanism[J]. Mechanics, 2000, 27(5): 10-11.
[10]NOVACEK Z. Radiation of a Whip Antenna on the Car Body[C]// 17th International Conference Radioelektronika. Brno, 2007: 1-4.
[11]姚嘉凌, 史文库, 陈志勇, 等. 基于车载导航的半主动悬架路况协调控制[J]. 机械强度， 2015, 37(4): 587-592.
YAO Jialing, SHI Wenku, CHEN Zhiyong, et al. Coordinated Control Algorithm for Semi-active Suspension in Various Roud Conditions Based on Navigation[J]. Journal of Mechanical Strength，2015, 37(4): 587-592.
[12]任克亮, 李志刚. 行驶状态下的车载雷达动力学研究[J]. 环境装备工程，2013, 10(2): 62-66.
REN Keliang, LI Zhigang. Study on Dynamics of Running Vehicle Radar[J]. Equipment Environmental Engineering，2013, 10(2): 62-66.
[13]LI X, JI Y C, LU W, et al. Analysis of GPR Antenna System Mounted on a Vehicle[J]. IEEE Antennas & Wireless Propagation Letters，2013, 12(1): 575-578.
[14]鹿玲, 姚建涛, 顾伟栋, 等. 基于Kane方程的冗余驱动5UPS/PRPU并联机床动力学分析[J]. 农业机械学报, 2016, 47(6): 366-372.
LU Ling, YAO Jiantao, GU Weidong, et al. Dynamics Analysis of 5UPS/PRPU Parallel Machine Tool with Redundant Actuation Based on Kane Equation[J]. Transactions of the Chinese Society for Agricultural Machinery，2016, 47(6): 366-372.
[15]CHEN B, YU J J, ZONG G H, et al. Dynamic Modeling and Sliding Mode Control of a 2-DOF Spherical Parallel Mechanism with a Passive Branch[C]// 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Buffalo, United states, 2014: 17-20.
[16]TSAI L W. Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work[J]. Journal of Mechanical Design, 2000, 122(1):3-9.
[17]宋雪萍, 李鹤, 李小彭, 等. 基于面向对象的机械产品的动态设计建模[J]. 机械设计，2014, 21: 75-77.
SONG Xueping, LI He, LI Xiaopeng, et al. Dynamic Design Modeling of Mechanical Products Based on Object Oriented[J]. Journal of Machine Design，2014, 21: 75-77.
[18]冯霏, 刘挺, 闻邦椿. 基于传递矩阵法的振动筛动态设计研究[J]. 机械制造，2009, 47(10): 22-24.
FENG Fei, LIU Ting, WEN Bangchun. Dynamic Design of Vibrating Screen Based on Transfer Matrix Method[J]. Machinery, 2009, 47(10): 22-24.
[19]张楠, 侯晓林, 闻邦椿. 基于动态优化设计方法振动筛设计的研究[J]. 煤矿机械, 2008, 29(3): 12-15.
ZHANG Nan, HOU Xiaolin, WEN Bangchun. Research for Design of Vibration Screen Based on Dynamic Optimization Design[J]. Coal Mine Machinery, 2008, 29(3): 12-15.
[20]张利敏, 梅江平, 赵学满, 等. Delta机械手动力尺度综合[J]. 机械工程学报，2010, 46(3): 1-7.
ZHANG Limin, MEI Jiangping, ZHAO Xueman, et al. Dynamic Dimensional Synthesis of Delta Robot[J]. Journal of Mechanical Engineering, 2010, 46(3): 1-7.
[21]乔山林, 顾吉丰. 风载荷对雷达天线座的影响与评估[J]. 现代雷达，2017, 39(10): 95-99.
QIAO Shanlin, GU Jifeng.Effect and Evaluation of Wind-load to Radar Pedestal[J]. Modern Radar, 2017, 39(10): 95-99.
[22]潘双夏, 陈助碧, 冯培恩. M-file S-函数在时域路面不平度建模中的应用[J].中国工程机械学报，2006, 4(4): 379-384.
PAN Shuangxia, CHEN Zhubi, FENG Peien. Investigating M-file S-function on Time-domain Road Roughness Modeling[J]. Chinese Journal of Construction Machinery, 2006, 4(4): 379-384.