[1]尹辉俊, 王祖皓, 洪晓莉,等. 叉车门架系统中滚轮所受作用力的计算分析[J]. 机械设计与制造, 2015(5): 80-82.
YIN Huijun, WANG Zuhao, HONG Xiaoli,et al. The Calculation and Analysis of the Force on the Wheels in the Forklift Door Frame System [J]. Machinery Design & Manufacture, 2015(5): 80-82.
[2]徐杰君. 叉车门架的有限元分析及动态仿真分析[D]. 西安:西北农林科技大学, 2009.
XU Jiejun. The Finite Element Anslysis and Dynamic Simulation Anslysis of the Forklift Mask [D]. Xi'an: Northwest Agriculture and Forestry University, 2009.
[3]彭振. 中吨位叉车门架的有限元分析与结构优化[D]. 锦州:辽宁工业大学, 2014.
PENG Zhen. Middle Tonnage Forklift Truck Door Frame Finite Element Analysis and Structure Optimization to Improve[D].Jinzhou: Liaoning University of Technology, 2014.
[4]许华旸, 关立文, 王立平,等. 惯性载荷下飞行模拟器大臂结构的拓扑优化[J]. 机械工程学报, 2014, 50(9): 14-23.
XU Huayang, GUAN Liwen, WANG Liping, et al. Topology Optimization for the Arm of Flight Simulator under Inertial Loads[J]. Journal of Mechanical Engineering, 2014, 50(9): 14-23.
[5]魏静, 李震, 孙伟,等. 基于SIMP及应变能理论的高速动车齿轮箱结构优化[J]. 机械强度, 2011, 33(4): 558-564.
WEI Jing, LI Zhen, SUN Wei, et al. Shape and Topology Optimization for Gear Box of High Speedtrain Based on SIMP Model and Strain Energy Theory[J]. Journal of Mechanical Strength, 2011, 33(4): 558-564.
[6]范文杰, 范子杰, 桂良进,等. 多工况下客车车架结构多刚度拓扑优化设计研究[J]. 汽车工程, 2008, 30(6): 531-533.
FAN Wenjie, FAN Zijie, GUI Liangjin, et al. Multi-stiffness Topology Optimization of Bus Frame with Multiple Loading Conditions[J]. Automotive Engineering,2008, 30(6): 531-533.
[7]兰凤崇, 赖番结, 陈吉清,等. 考虑动态特性的多工况车身结构拓扑优化研究[J]. 机械工程学报, 2014, 50(20): 122-128.
LAN Fengchong, LAI Fanjie, CHEN Jiqing, et al. Multi-case Topology Optimization of Body Structure Considering Dynamic Characteristic[J]. Journal of Mechanical Engineering, 2014, 50(20): 122-128.
[8]兰凤崇, 张浩锴, 王家豪,等. 汽车转向节拓扑优化方法研究及应用[J]. 汽车工程, 2014, 36(4): 464-468.
LAN Fengchong, ZHANG Haokai, WANG Jiahao, et al. Study and Application of Topology Optimization Technique for Vehicle Steering Knuckles[J]. Automotive Engineering, 2014, 36(4): 464-468.
[9]范文杰, 范子杰, 苏瑞意. 汽车车架结构多目标拓扑优化方法研究[J]. 中国机械工程, 2008, 19(12): 1505-1508.
FAN Wenjie, FAN Zijie, SU Ruiyi. Research on Multi-objective Topology Optimization on Bus Chassis Frame[J]. China Mechanical Engineering, 2008, 19(12): 1505-1508.
[10]张兰春, 赵清海, 张洪信,等. 汽车动力总成悬置支架的多目标拓扑优化[J]. 汽车工程, 2017, 39(5): 551-555.
ZHANG Lanchun, ZHAO Qinghai, ZHANG Hongxin, et al. Multi-objective Topology Optimization for the Mount Bracket of Vehicle Powertrain[J]. Automotive Engineering, 2017, 39(5): 551-555.
[11]谢伦杰, 张维刚, 常伟波,等. 基于SIMP理论的电动汽车车身多目标拓扑优化[J]. 汽车工程, 2013, 35(7): 583-587.
XIE Lunjie, ZHANG Weigang, CHANG Weibo, et al. Multi-objective Topology Optimization for Electric Car Body Based on SIMP Theory[J]. Automotive Engineering, 2013, 35(7): 583-587.
[12]高云凯, 王婧人, 汪翼. 基于正交试验的大型客车车身结构多工况拓扑优化研究[J]. 汽车技术, 2011(11): 16-19.
GAO Yunkai, WANG Jingren, WANG Yi. Multi-case Topology Optimization of Bus Body Structure Based on Orthogonal Test[J]. Automobile Technology, 2011(11): 16-19.
[13]于少春. 变速器齿轮齿面接触分析建模与仿真[D]. 长春:吉林大学, 2007.
YU Shaochun. Modeling and Simulation for Tooth Face Contact Analysis of Transmission Gears[D]. Changchun: Jilin University, 2007.
[14]石亦平, 周玉蓉. ABAQUS有限元分析实例详解[M]. 北京:机械工业出版社, 2016.
SHI Yiping, ZHOU Yurong. ABAQUS Finite Element Analysis Example Detailed[M]. Beijing: Machinery Industry Press, 2016.
[15]BENDSE M P, SIGMUND O. Material Interpolation Schemes in Topology Optimization[J]. Archive of Applied Mechanics, 1999,69(9/10): 635-654.
[16]祝小元, 方宗德, 申闪闪,等. 汽车悬架控制臂的多目标拓扑优化[J]. 汽车工程, 2011, 33(2): 138-141.
ZHU Xiaoyuan, FANG Zongde, SHEN Shanshan, et al. Multi-objective Topology Optimization for the Control Arm of Vehicle Suspension[J]. Automotive Engineering,2011, 33(2): 138-141.
[17]冯剑军, 谭援强. 刚性圆柱和半平面之间摩擦滑动接触中的应力计算[J]. 工程力学, 2010, 27(8): 40-47.
FENG Jianjun, TAN Yuanqiang. The Stress Calculation in the Frictionally Slipping Contact between a Rigid Cylinder and a Half Plane[J]. Engineering Mechanics, 2010, 27(8): 40-47.
[18]濮良贵, 陈国定, 吴立言. 机械设计[M]. 北京:高等教育出版社, 2013.
PU Lianggui, CHEN Guoding, WU Liyan. Mechanical Design [M]. Beijing: Higher Education Press, 2013.
[19]WANG S, HOU L, LEE J, et al. Evaluating Wheel Loader Operating Conditions Based on Radar Chart[J]. Automation in Construction, 2017, 84: 42-49.
[20]邱瑞斌, 雷飞, 陈园,等. 基于权重比的车架多工况拓扑优化方法研究[J]. 工程设计学报, 2016, 23(5): 444-452.
QIU Ruibin, LEI Fei, CHEN Yuan, et al. Research on the Method of Multi-case Topology Optimization of Frame Structure Based on the Weight Ratio[J]. Chinese Journal of Engineering Design, 2016, 23(5): 444-452. |