中国机械工程

• 机械基础工程 • 上一篇    下一篇

弹药筒超声自动检测方法与系统

王哲;孟杰;崔西明;康宜华   

  1. 华中科技大学机械科学与工程学院,武汉,430074
  • 出版日期:2018-07-25 发布日期:2018-07-27
  • 基金资助:
    国家自然科学基金资助项目(51275193)
    National Natural Science Foundation of China (No. 51275193)

Ultrasonic Method and System for Automatic Detection of Cartridges

WANG Zhe;MENG Jie;CUI Ximing;KANG Yihua   

  1. School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan,430074
  • Online:2018-07-25 Published:2018-07-27
  • Supported by:
    National Natural Science Foundation of China (No. 51275193)

摘要: 提出了一种基于弹药筒下母线入射的恒定横波折射角方法,实现对不同规格弹药筒的微细裂纹检测,通过仿真和实验验证检测的可靠性。设计了用于弹药筒等小径筒体的多工位高速超声自动化检测系统,分析检测系统中缺陷信号和干扰信号的特征,提出一种扫描信号滤波报警算法,最终实现了弹药筒上料、检测、分选全过程自动化。结果表明,该系统能检测的最小缺陷深度为0.05 mm,检测速度可达1 200件/h,误判率仅为1%。

关键词: 弹药筒, 超声横波检测, 恒定折射角, 微细裂纹, 滤波算法

Abstract: A method to detect micro cracks in different specifications of cartridges was proposed based on the constant shear wave refraction angle of busbar incidence.The reliability was verified by the simulation and experiment.Multi-station high-speed ultrasonic testing system for small-diameter cylinder,such as cartridge,was designed.A scanning signal filtering algorithm was proposed according to the signal features of defects and interferences.Finally,the automation of the whole processes,such as feeding detecting and sorting were realized.The results show that the system may detect the minimum crack depth of 0.05 mm, the detection speed is 1 200 pieces/h,and the misjudgment ratio is only 1%.

Key words: cartridge, ultrasonic shear wave detecting, constant refraction angle, micro crack, filtering algorithm

中图分类号: