[1]ASILTURK I, CUNKAS M. Modeling and Prediction of Surface Roughness in Turning Operations Using Artificial Neural Network and Multiple Regression Method[J]. Expert Systems with Applications, 2011, 38(5):5826-5832.
[2]吕彦明, 陈五一, 陈鼎昌. 球头刀铣削残余高度精确计算[J]. 中国机械工程, 2003, 14(18):1550-1551.
LYU Yanming, CHEN Wuyi, CHEN Dingchang. Accurate Calculation of Ball End Cutter--s Milling Residual Height[J]. China Mechanical Engineering, 2003, 14(18):1550-1551.
[3]姚倡锋, 张定华, 黄新春,等. TC11钛合金高速铣削的表面粗糙度与表面形貌研究[J]. 机械科学与技术, 2011, 30(9):1573-1578
YAO Changfeng, ZHANG Dinghua, HUANG Xinchun. Study on Surface Roughness and Surface Morphology of TC11 Titanium Alloy in High Speed Milling[J].Mechnical Science and Technology for Aerospace Engineering, 2011, 30(9):1573-1578.
[4]LAVERNHE S, QUINSAT Y, LARTIGUE C. Model for the Prediction of 3D Surface Topography in 5-axis Milling[J]. The International Journal of Advanced Manufacturing Technology, 2010, 51(9):915-924.
[5]OMAR O E E K, EL-WARDANY T, NG E, et al. An Improved Cutting Force and Surface Topography Prediction Model in End Milling[J]. International Journal of Machine Tools & Manufacture, 2007, 47(7/8):1263-1275.
[6]王安良, 杨春信. 机械加工表面形貌分形特征的计算方法[J]. 中国机械工程, 2002, 13(8):714-718.
WANG Anliang, YANG Chunxin. Calculation Method of Fractal Characteristics of Machined Surface Topography [J]. China Mechanical Engineering, 2002, 13(8):714-718.
[7]ARIZMENDI M, FERNáNDEZ J, GIL A, et al. Model for the Prediction of Heterogeneity Bands in the Topography of Surfaces Machined by Peripheral Milling Considering Tool Runout[J]. International Journal of Machine Tools & Manufacture, 2010, 50(1):51-64.
[8]COSTES J P, MOREAU V. Surface Roughness Prediction in Milling Based on Tool Displacements[J]. Journal of Manufacturing Processes, 2011, 13(2):133-140.
[9]JUNG T S, YANG M Y, LEE K J. A New Approach to Analysing Machined Surfaces by Ball-end Milling, Part II[J]. The International Journal of Advanced Manufacturing Technology, 2005, 25(9):841-849.
[10]李红岩. 高速铣削淬硬钢刀具切削运动轨迹控制方法研究[D]. 哈尔滨:哈尔滨理工大学, 2012.
LI Hongyan. Research on Cutting Trajectory Control Method of Cutter for High Speed Milling Hardened Steel[D], Harbin :Harbin University of Science and Technology,2012.